Re: [PATCH net-next v10 00/12] net: ethernet: mtk_eth_soc: various enhancements

[Paolo Abeni <pabeni@redhat.com>]

On Tue, 2023-02-21 at 11:39 +0000, Daniel Golle wrote:
> This series brings a variety of fixes and enhancements for mtk_eth_soc,
> adds support for the MT7981 SoC and facilitates sharing the SGMII PCS
> code between mtk_eth_soc and mt7530.
> 
> Note that this series depends on commit 697c3892d825
> ("regmap: apply reg_base and reg_downshift for single register ops") to
> not break mt7530 pcs register access.
> 
> The whole series has been tested on MT7622+MT7531 (BPi-R64),
> MT7623+MT7530 (BPi-R2) and MT7981+GPY211 (GL.iNet GL-MT3000).
> 
> Changes since v9:
>  * fix path in mediatek,sgmiisys dt-binding
> 
> Changes since v8:
>  * move mediatek,sgmiisys dt-bindings to correct net/pcs folder
>  * rebase on top of net-next/main so series applies cleanly again
> 
> Changes since v7:
>  * move mediatek,sgmiisys.yaml to more appropriate folder
>  * don't include <linux/phylink.h> twice in PCS driver, sort includes
> 
> Changes since v6:
>  * label MAC MCR bit 12 in 08/12, MediaTek replied explaining its function
> 
> Changes since v5:
>  * drop dev pointer also from struct mtk_sgmii, pass it as function
>    parameter instead
>  * address comments left for dt-bindings
>  * minor improvements to commit messages
> 
> Changes since v4:
>  * remove unused dev pointer in struct pcs_mtk_lynxi
>  * squash link timer check into correct follow-up patch
> 
> Changes since v3:
>  * remove unused #define's
>  * use BMCR_* instead of #define'ing our own constants
>  * return before changing registers in case of invalid link timer
> 
> Changes since v2:
>  * improve dt-bindings, convert sgmisys bindings to dt-schema yaml
>  * fix typo
> 
> Changes since v1:
>  * apply reverse xmas tree everywhere
>  * improve commit descriptions
>  * add dt binding documentation
>  * various small changes addressing all comments received for v1
> 
> 
> Daniel Golle (12):
>   net: ethernet: mtk_eth_soc: add support for MT7981 SoC
>   dt-bindings: net: mediatek,net: add mt7981-eth binding
>   dt-bindings: arm: mediatek: sgmiisys: Convert to DT schema
>   dt-bindings: arm: mediatek: sgmiisys: add MT7981 SoC
>   net: ethernet: mtk_eth_soc: set MDIO bus clock frequency
>   net: ethernet: mtk_eth_soc: reset PCS state
>   net: ethernet: mtk_eth_soc: only write values if needed
>   net: ethernet: mtk_eth_soc: fix RX data corruption issue
>   net: ethernet: mtk_eth_soc: ppe: add support for flow accounting
>   net: pcs: add driver for MediaTek SGMII PCS
>   net: ethernet: mtk_eth_soc: switch to external PCS driver
>   net: dsa: mt7530: use external PCS driver
> 
>  .../arm/mediatek/mediatek,sgmiisys.txt        |  25 --
>  .../devicetree/bindings/net/mediatek,net.yaml |  52 ++-
>  .../bindings/net/pcs/mediatek,sgmiisys.yaml   |  55 ++++
>  MAINTAINERS                                   |   7 +
>  drivers/net/dsa/Kconfig                       |   1 +
>  drivers/net/dsa/mt7530.c                      | 277 ++++------------
>  drivers/net/dsa/mt7530.h                      |  47 +--
>  drivers/net/ethernet/mediatek/Kconfig         |   2 +
>  drivers/net/ethernet/mediatek/mtk_eth_path.c  |  14 +-
>  drivers/net/ethernet/mediatek/mtk_eth_soc.c   |  67 +++-
>  drivers/net/ethernet/mediatek/mtk_eth_soc.h   | 105 +++---
>  drivers/net/ethernet/mediatek/mtk_ppe.c       | 114 ++++++-
>  drivers/net/ethernet/mediatek/mtk_ppe.h       |  25 +-
>  .../net/ethernet/mediatek/mtk_ppe_debugfs.c   |   9 +-
>  .../net/ethernet/mediatek/mtk_ppe_offload.c   |   8 +
>  drivers/net/ethernet/mediatek/mtk_ppe_regs.h  |  14 +
>  drivers/net/ethernet/mediatek/mtk_sgmii.c     | 192 ++---------
>  drivers/net/pcs/Kconfig                       |   7 +
>  drivers/net/pcs/Makefile                      |   1 +
>  drivers/net/pcs/pcs-mtk-lynxi.c               | 302 ++++++++++++++++++
>  include/linux/pcs/pcs-mtk-lynxi.h             |  13 +
>  21 files changed, 801 insertions(+), 536 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
>  create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
>  create mode 100644 drivers/net/pcs/pcs-mtk-lynxi.c
>  create mode 100644 include/linux/pcs/pcs-mtk-lynxi.h
> 
> 
> base-commit: 3fcdf2dfefb6313ea0395519d1784808c0b6559b

# Form letter - net-next is closed

The merge window for v6.3 has begun and therefore net-next is closed
for new drivers, features, code refactoring and optimizations.
We are currently accepting bug fixes only.

Please repost when net-next reopens after Mar 6th.

RFC patches sent for review only are obviously welcome at any time.