Re: [PATCH] dt-bindings: media: Add bindings for Imagination E5010 JPEG Encoder driver

[Nicolas Dufresne <nicolas@ndufresne.ca>]

Le mercredi 26 juillet 2023 à 18:33 +0200, Krzysztof Kozlowski a écrit :
> On 26/07/2023 18:26, Devarsh Thakkar wrote:
> > Add dt-bindings for Imagination E5010 JPEG Encoder driver which is
> > implemented as stateful V4L2 M2M driver.
> > 
> > Co-developed-by: David Huang <d-huang@ti.com>
> > Signed-off-by: David Huang <d-huang@ti.com>
> 
> A nit, subject: drop second/last, redundant "bindings for". The
> "dt-bindings" prefix is already stating that these are bindings.
> 
> Drop also "driver". Bindings are for hardware, not drivers.
> 
> Prefix starts with media and then dt-bindings.

That being said, I haven't seen any submission for the driver using these, is it
common practice to upstream bindings for unsupported hardware ?

Nicolas

> 
> 
> > Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
> > ---
> >  .../bindings/media/img,e5010-jpeg-enc.yaml    | 79 +++++++++++++++++++
> >  MAINTAINERS                                   |  5 ++
> >  2 files changed, 84 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
> > new file mode 100644
> > index 000000000000..0060373eace7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
> > @@ -0,0 +1,79 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Imagination E5010 JPEG Encoder
> > +
> > +maintainers:
> > +  - Devarsh Thakkar <devarsht@ti.com>
> > +
> > +description: |
> > +  The E5010 is a JPEG encoder from Imagination Technologies implemented on
> > +  TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422
> > +  inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to
> > +  8Kx8K resolution.
> > +
> > +properties:
> > +  compatible:
> > +    const: img,e5010-jpeg-enc
> 
> Your description suggests that this is part of TI SoC. Pretty often
> licensed blocks cannot be used on their own and need some
> customizations. Are you sure your block does not need any customization
> thus no dedicated compatible is needed?
> 
> > +
> > +  reg:
> > +    items:
> > +      - description: The E5010 main register region
> > +      - description: The E5010 mmu register region
> > +
> > +  reg-names:
> > +    items:
> > +      - const: regjasper
> > +      - const: regmmu
> > +
> 
> Drop reg from both
> 
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    minItems: 1
> > +    maxItems: 2
> 
> You need to specify the items. Also, no variable number of clocks. Why
> would they vary if block is strictly defined?
> 
> > +
> > +  clock-names:
> > +    minItems: 1
> > +    maxItems: 2
> 
> Instead list the names.
> 
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +    cbass_main {
> 
> That's some weird name. Probably you meant soc. Anyway, underscores are
> not allowed.
> 
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +      e5010: e5010@fd20000 {
> 
> Node names should be generic. See also an explanation and list of
> examples (not exhaustive) in DT specification:
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> 
> 
> Drop the label.
> 
> > +          compatible = "img,e5010-jpeg-enc";
> > +          reg = <0x00 0xfd20000 0x00 0x100>,
> > +                <0x00 0xfd20200 0x00 0x200>;
> > +          reg-names = "regjasper", "regmmu";
> > +          clocks = <&k3_clks 201 0>;
> > +          clock-names = "core_clk";
> > +          power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
> > +          interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > +      };
> > +    };
> 
> 
> Best regards,
> Krzysztof
>