From: Matthias Brugger <matthias.bgg@gmail.com>
To: "Alexander Stein" <alexander.stein@ew.tq-group.com>,
"MyungJoo Ham" <myungjoo.ham@samsung.com>,
"Chanwoo Choi" <cw00.choi@samsung.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
"Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Heiko Stuebner" <heiko@sntech.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
linux-arm-msm@vger.kernel.org,
linux-rockchip@lists.infradead.org
Subject: Re: [PATCH 3/3] arm64: dts: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
Date: Mon, 12 Jun 2023 12:58:57 +0200 [thread overview]
Message-ID: <3d55af5b-5dc3-08fa-35d6-16c24b47cec8@gmail.com> (raw)
In-Reply-To: <20230608081153.441455-3-alexander.stein@ew.tq-group.com>
On 08/06/2023 10:11, Alexander Stein wrote:
> Use id-gpios and vbus-gpios instead.
>
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi | 2 +-
> arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts | 2 +-
> arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 4 ++--
> arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 2 +-
For mediatek:
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 +-
> arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 4 ++--
> arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts | 2 +-
> arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts | 2 +-
> arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts | 2 +-
> arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 2 +-
> arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts | 2 +-
> arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts | 2 +-
> arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts | 2 +-
> arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts | 2 +-
> arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 2 +-
> arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 4 ++--
> arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 2 +-
> arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts | 2 +-
> arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 2 +-
> arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts | 2 +-
> arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +-
> 23 files changed, 26 insertions(+), 26 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
> index 5dbec71747c3b..61c2a63efc6db 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
> @@ -109,7 +109,7 @@ extcon_usb0: extcon-usb0 {
> compatible = "linux,extcon-usb-gpio";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usb0_extcon>;
> - id-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
> index d4ae7a3efff87..9e53b214abc85 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
> @@ -24,7 +24,7 @@ extcon_usbotg: extcon-usbotg0 {
> compatible = "linux,extcon-usb-gpio";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usbcon0>;
> - id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
> };
>
> pcie0_refclk: pcie0-refclk {
> diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> index fffdb7bbf889e..0c38f7b517637 100644
> --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> @@ -43,12 +43,12 @@ cpus_fixed_vproc1: regulator-vproc-buck1 {
>
> extcon_usb: extcon_iddig {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
> };
>
> extcon_usb1: extcon_iddig1 {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
> };
>
> usb_p0_vbus: regulator-usb-p0-vbus {
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> index 5122963d8743a..607d65ddba9ec 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> @@ -41,7 +41,7 @@ hdmi_connector_in: endpoint {
>
> extcon_usb: extcon_iddig {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
> };
>
> usb_p1_vbus: regulator@0 {
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> index 56dfca61253e6..8b8cb392e851d 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> @@ -77,7 +77,7 @@ usb2513 {
>
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
> index b599909c44639..be657df89e734 100644
> --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
> +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
> @@ -99,14 +99,14 @@ button {
>
> usb2_id: usb2-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&usb2_vbus_det_gpio>;
> };
>
> usb3_id: usb3-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&usb3_vbus_det_gpio>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
> index 5025c08e48173..9b4270ba0652f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
> @@ -48,7 +48,7 @@ button-volume-up {
>
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> index 7b629243ef0d7..5e69c32c297eb 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> @@ -52,7 +52,7 @@ led-0 {
>
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 69 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
> index 56c42b0c97336..ada2eda5dacdb 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
> @@ -75,7 +75,7 @@ led-green {
>
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> pinctrl-0 = <&usb_id_default>;
> pinctrl-names = "default";
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
> index 175ca011998c6..f3eb7367db3e0 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
> @@ -80,7 +80,7 @@ led-2 {
>
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> index f23cfb2bf7934..4c19738af23ea 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> @@ -68,7 +68,7 @@ led-0 {
>
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
> index 733917531218c..27e02021b577a 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
> @@ -56,7 +56,7 @@ button-volume-up {
>
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
> index 85a8d8fe212ff..ae522f4c0aaec 100644
> --- a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
> @@ -32,7 +32,7 @@ chosen {
>
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> pinctrl-0 = <&usb_id_default>;
> pinctrl-names = "default";
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts
> index 4a0645db0ae14..6374c5f53d9a1 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts
> @@ -24,5 +24,5 @@ &usb_detect {
> };
>
> &usb3_id {
> - id-gpio = <&tlmm 24 GPIO_ACTIVE_LOW>;
> + id-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> index b4b770a9277dc..d55e4075040ff 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> @@ -71,7 +71,7 @@ panel_tvdd: tvdd-regulator {
>
> usb3_id: usb3-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 25 GPIO_ACTIVE_LOW>;
> + id-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
> pinctrl-names = "default";
> pinctrl-0 = <&usb_detect>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
> index b35e2d9f428c1..b6a214bea70f5 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
> @@ -31,7 +31,7 @@ aliases {
> */
> extcon_usb: extcon-usb {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
> };
>
> gpio-hall-sensors {
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> index 687e96068cb2b..876c6921ddf07 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> @@ -89,8 +89,8 @@ vph_pwr: vph-pwr-regulator {
>
> extcon_usb: extcon-usb {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
> - vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
> + vbus-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&cc_dir_default &usb_detect_en>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
> index 7459525d99828..0c1352b8f2645 100644
> --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
> +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
> @@ -43,7 +43,7 @@ key-volup {
> */
> extcon_usb: extcon-usb {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
> };
>
> hdmi-out {
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
> index 3033723fc6ff3..87d0293c728d8 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
> @@ -150,7 +150,7 @@ cont_splash_mem: splash@9d400000 {
> */
> extcon_usb: extcon-usb {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
> index 8fb2d17887424..3c47410ba94c0 100644
> --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
> @@ -85,7 +85,7 @@ framebuffer_mem: memory@9d400000 {
> */
> extcon_usb: extcon-usb {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> index 9f8a9ef398a26..9353b9b622f6e 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> @@ -42,7 +42,7 @@ framebuffer0: framebuffer@5c000000 {
>
> extcon_usb: extcon-usb {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
> };
>
> gpio-keys {
> diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
> index a7f4aeae9c1a5..1b06617ba34a9 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
> @@ -63,7 +63,7 @@ cmdline_mem: memory@ffd00000 {
>
> extcon_usb: usb-id {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
> };
>
> gpio-keys {
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> index aa3e21bd6c8f4..20e3f41efe97f 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> @@ -27,7 +27,7 @@ module_led: led-0 {
>
> extcon_usb3: extcon-usb3 {
> compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
> + id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&usb3_id>;
> };
next prev parent reply other threads:[~2023-06-12 11:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-08 8:11 [PATCH 1/3] dt-bindings: extcon-usb-gpio: convert to DT schema format Alexander Stein
2023-06-08 8:11 ` [PATCH 2/3] ARM: dts: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties Alexander Stein
2023-06-08 8:11 ` [PATCH 3/3] arm64: " Alexander Stein
2023-06-08 8:21 ` Heiko Stübner
2023-06-12 10:58 ` Matthias Brugger [this message]
2023-06-12 8:29 ` [PATCH 1/3] dt-bindings: extcon-usb-gpio: convert to DT schema format Krzysztof Kozlowski
2023-06-14 23:15 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3d55af5b-5dc3-08fa-35d6-16c24b47cec8@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=agross@kernel.org \
--cc=alexander.stein@ew.tq-group.com \
--cc=andersson@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bcousson@baylibre.com \
--cc=conor+dt@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=heiko@sntech.de \
--cc=kernel@pengutronix.de \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=myungjoo.ham@samsung.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).