devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stanimir Varbanov <stanimir.varbanov@linaro.org>
To: Konrad Dybcio <konradybcio@gmail.com>, skrzynka@konradybcio.pl
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-arm-msm@vger.kernel.org, linux-media@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] media: venus: Add support for MSM8939
Date: Tue, 5 May 2020 14:43:07 +0300	[thread overview]
Message-ID: <3d73eb09-ba4e-5706-042c-0d1894928a35@linaro.org> (raw)
In-Reply-To: <20200501203505.144362-2-konradybcio@gmail.com>

Hi Konrad,

On 5/1/20 11:35 PM, Konrad Dybcio wrote:
> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
> ---
>  drivers/media/platform/qcom/venus/core.c | 33 ++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
> index 194b10b987672..f3a15991ac763 100644
> --- a/drivers/media/platform/qcom/venus/core.c
> +++ b/drivers/media/platform/qcom/venus/core.c
> @@ -405,6 +405,38 @@ static const struct venus_resources msm8916_res = {
>  	.fwname = "qcom/venus-1.8/venus.mdt",
>  };
>  
> +static const struct freq_tbl msm8939_freq_table[] = {
> +	{ 489600, 266670000 },	/* 1080p @ 60 */
> +	{ 244800, 200000000 },	/* 1080p @ 30 */
> +	{ 244800, 133330000 },	/* 1080p @ 30 (decode only) */
> +	{ 220800, 133330000 },  /* 720p @ 60 (decode only?) */
> +	{ 108000, 133330000 },  /* 720p @ 30*/
> +	{ 72000, 133330000 },  /* VGA @ 60 */
> +	{ 36000, 133330000 },  /* VGA @ 30 */

133MHz is the minimum clock frequency in the GCC driver? Do you think
that will change?

> +};
> +
> +static const struct reg_val msm8939_reg_preset[] = {
> +	{ 0xe0020, 0x0aaaaaaa },
> +	{ 0xe0024, 0x0aaaaaaa },
> +	{ 0x80124, 0x00000003 },
> +};
> +
> +static const struct venus_resources msm8939_res = {
> +	.freq_tbl = msm8939_freq_table,
> +	.freq_tbl_size = ARRAY_SIZE(msm8939_freq_table),
> +	.reg_tbl = msm8939_reg_preset,
> +	.reg_tbl_size = ARRAY_SIZE(msm8939_reg_preset),
> +	.clks = { "core", "iface", "bus", },
> +	.clks_num = 3,
> +	.max_load = 489600, /* 1080p @ 60 */
> +	.hfi_version = HFI_VERSION_1XX,
> +	.vmem_id = VIDC_RESOURCE_NONE,
> +	.vmem_size = 0,
> +	.vmem_addr = 0,
> +	.dma_mask = 0xddc00000 - 1,
> +	.fwname = "qcom/venus-1.8/venus.mdt",
> +};
> +
>  static const struct freq_tbl msm8996_freq_table[] = {
>  	{ 1944000, 520000000 },	/* 4k UHD @ 60 (decode only) */
>  	{  972000, 520000000 },	/* 4k UHD @ 30 */
> @@ -567,6 +599,7 @@ static const struct venus_resources sc7180_res = {
>  
>  static const struct of_device_id venus_dt_match[] = {
>  	{ .compatible = "qcom,msm8916-venus", .data = &msm8916_res, },
> +	{ .compatible = "qcom,msm8939-venus", .data = &msm8939_res, },
>  	{ .compatible = "qcom,msm8996-venus", .data = &msm8996_res, },
>  	{ .compatible = "qcom,sdm845-venus", .data = &sdm845_res, },
>  	{ .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, },
> 

-- 
regards,
Stan

  reply	other threads:[~2020-05-05 11:43 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-01 20:35 [PATCH 0/2] Add support for venus on msm8939 Konrad Dybcio
2020-05-01 20:35 ` [PATCH 1/2] media: venus: Add support for MSM8939 Konrad Dybcio
2020-05-05 11:43   ` Stanimir Varbanov [this message]
2020-05-06 21:23     ` Konrad Dybcio
2020-05-07  8:13       ` Stanimir Varbanov
2020-05-01 20:35 ` [PATCH 2/2] dt-bindings: media: Document MSM8939 Venus Konrad Dybcio
2020-05-05  3:55   ` Rob Herring
2020-05-05  8:01     ` Konrad Dybcio
2020-05-05 11:40 ` [PATCH 0/2] Add support for venus on msm8939 Stanimir Varbanov
2020-05-06 21:40   ` Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3d73eb09-ba4e-5706-042c-0d1894928a35@linaro.org \
    --to=stanimir.varbanov@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=skrzynka@konradybcio.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).