devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <Claudiu.Beznea@microchip.com>
To: <michael@walle.cc>, <Kavyasree.Kotagiri@microchip.com>
Cc: <Nicolas.Ferre@microchip.com>, <arnd@arndb.de>, <olof@lixom.net>,
	<soc@kernel.org>, <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski@canonical.com>,
	<alexandre.belloni@bootlin.com>
Subject: Re: [PATCH v1 3/6] ARM: dts: lan966x: add all flexcom usart nodes
Date: Fri, 18 Mar 2022 12:17:24 +0000	[thread overview]
Message-ID: <3e17aa8b-f6e5-e2c1-bd1d-8950d23c3e49@microchip.com> (raw)
In-Reply-To: <219ffd086373c453d5d0aad897cd2d41@walle.cc>

On 07.03.2022 14:04, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
> 
> Am 2022-03-07 12:53, schrieb Claudiu.Beznea@microchip.com:
>> On 04.03.2022 13:01, Michael Walle wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know
>>> the
>>> content is safe
>>>
>>> Hi,
>>>
>>> thanks for the quick review.
>>>
>>> Am 2022-03-04 09:30, schrieb Claudiu.Beznea@microchip.com:
>>>> On 03.03.2022 18:03, Michael Walle wrote:
>>>>> EXTERNAL EMAIL: Do not click links or open attachments unless you
>>>>> know
>>>>> the content is safe
>>>>>
>>>>> Add all the usart nodes for the flexcom block. There was already
>>>>> an usart node for the flexcom3 block. But it missed the DMA
>>>>> channels.
>>>>
>>>> And it would be good to go though a different patch.
>>>
>>> sure
>>>
>>>>> Although the DMA channels are specified, DMA is not
>>>>> enabled by default because break detection doesn't work with DMA.
>>>>>
>>>>> Keep the nodes disabled by default.
>>>>>
>>>>> Signed-off-by: Michael Walle <michael@walle.cc>
>>>>> ---
>>>>>  arch/arm/boot/dts/lan966x.dtsi | 55
>>>>> ++++++++++++++++++++++++++++++++++
>>>>>  1 file changed, 55 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/lan966x.dtsi
>>>>> b/arch/arm/boot/dts/lan966x.dtsi
>>>>> index a7d46a2ca058..bea69b6d2749 100644
>>>>> --- a/arch/arm/boot/dts/lan966x.dtsi
>>>>> +++ b/arch/arm/boot/dts/lan966x.dtsi
>>>>> @@ -92,6 +92,19 @@ flx0: flexcom@e0040000 {
>>>>>                         #size-cells = <1>;
>>>>>                         ranges = <0x0 0xe0040000 0x800>;
>>>>>                         status = "disabled";
>>>>> +
>>>>> +                       usart0: serial@200 {
>>>>> +                               compatible =
>>>>> "atmel,at91sam9260-usart";
>>>>
>>>> Are the usart blocks in lan966x 1:1 compatible with what is is
>>>> sam9260?
>>>> In
>>>> case not it may worth to have a new compatible here, for lan966x,
>>>> such
>>>> that
>>>> when new features will be implemented in usart driver for lan966x the
>>>> old
>>>> DT (this one) will work with the new kernel implementation.
>>>
>>> During my review of the inital dtsi patch, I've asked the same
>>> question
>>> [1]
>>> and I was told they are the same.
>>>
>>> At least this exact usart compatible is already in this file. I was
>>> under
>>> the impression, that was the least controversial compatible :)
>>
>> OK.
>>
>>>
>>> But you'll need to tell me if they are the same or not, I don't have
>>> any clue what microchip has reused.
>>
>> From software point of view comparing registers should be good, as far
>> as I
>> can tell. All AT91 datasheet should be available. I though you have
>> checked
>> one against LAN966. At the moment I don't have a DS for LAN966. I'll
>> find
>> one and have a look.
> 
> So my train of thought was like: even if the registers are the same I
> cannot be sure that it is the exact same IP and will behave the same.
> Therefore, it is something only microchip can answer.
> 
> You can find the registers at
> https://microchip-ung.github.io/lan9668_reginfo/reginfo_LAN9668.html
> 
> I'm not aware of any "classic" datasheet.

You can find all AT91 datasheet on Microchip web site [1].

Simple register comparison b/w register mapping at [2] and SAMA5D2
datasheet [3] (which uses the same compatible),  SAM9X60 datasheet [3] and
SAMA7G5 datasheet (not public at the moment) brings up a difference at
register FLEX_US_CR (bits 16, 17) which are not available on SAMA5D2,
SAM9X60 or SAMA7G5. Unless this is a mistake on documentation at [2] I say
it needs a new compatible.

Kavya, could you confirm this?

Thank you,
Claudiu Beznea

[1] https://www.microchip.com/
[2] https://microchip-ung.github.io/lan9668_reginfo/reginfo_LAN9668.html
[3] http://ww1.microchip.com/downloads/en/devicedoc/ds60001476b.pdf#G22.2193277
[4]
https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/ProductDocuments/DataSheets/SAM9X60-Data-Sheet-DS60001579E.pdf

> 
> -michael


  reply	other threads:[~2022-03-18 12:17 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-03 16:03 [PATCH v1 0/6] ARM: dts: lan966x: dtsi improvements and KSwitch D10 support Michael Walle
2022-03-03 16:03 ` [PATCH v1 1/6] ARM: dts: lan966x: swap dma channels for crypto node Michael Walle
2022-03-04  8:21   ` Claudiu.Beznea
2022-03-03 16:03 ` [PATCH v1 2/6] ARM: dts: lan966x: add sgpio node Michael Walle
2022-03-04  8:24   ` Claudiu.Beznea
2022-03-03 16:03 ` [PATCH v1 3/6] ARM: dts: lan966x: add all flexcom usart nodes Michael Walle
2022-03-04  8:30   ` Claudiu.Beznea
2022-03-04 11:01     ` Michael Walle
2022-03-07 11:53       ` Claudiu.Beznea
2022-03-07 12:04         ` Michael Walle
2022-03-18 12:17           ` Claudiu.Beznea [this message]
2022-03-22 21:39             ` Michael Walle
2022-03-24 16:32               ` Claudiu.Beznea
2022-03-03 16:03 ` [PATCH v1 4/6] ARM: dts: lan966x: add flexcom SPI nodes Michael Walle
2022-03-04  8:30   ` Claudiu.Beznea
2022-03-03 16:03 ` [PATCH v1 5/6] ARM: dts: lan966x: add flexcom I2C nodes Michael Walle
2022-03-03 16:03 ` [PATCH v1 6/6] ARM: dts: lan966x: add basic Kontron KSwitch D10 support Michael Walle
2022-03-04  8:31   ` Claudiu.Beznea
2022-03-04 11:15     ` Michael Walle
2022-03-07 12:07       ` Claudiu.Beznea
2022-03-07 12:17         ` Michael Walle
2022-03-18 12:26           ` Claudiu.Beznea
2022-03-23  8:06     ` Tudor.Ambarus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3e17aa8b-f6e5-e2c1-bd1d-8950d23c3e49@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=Kavyasree.Kotagiri@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael@walle.cc \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).