devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>,
	Xingyu Wu <xingyu.wu@starfivetech.com>,
	Samin Guo <samin.guo@starfivetech.com>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Ley Foon Tan <leyfoon.tan@starfivetech.com>,
	linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/1] dt-bindings: watchdog: starfive,jh7100-wdt: Add compatible for JH8100
Date: Thu, 14 Dec 2023 08:39:46 +0100	[thread overview]
Message-ID: <40b5d1a8-37d2-4c68-8d16-33c92c3e5716@linaro.org> (raw)
In-Reply-To: <20231214033056.3953143-2-jisheng.teoh@starfivetech.com>

On 14/12/2023 04:30, Ji Sheng Teoh wrote:
> Add "starfive,jh8100-wdt" compatible string for StarFive's JH8100
> watchdog.
> Since JH8100 watchdog only has 1 reset signal, update binding
> document to support one reset for "starfive,jh8100-wdt" compatible.
> 
> Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
> Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
> ---
>  .../watchdog/starfive,jh7100-wdt.yaml         | 48 ++++++++++++++++---
>  1 file changed, 42 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml b/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
> index 68f3f6fd08a6..79082c5f9971 100644
> --- a/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
> @@ -19,14 +19,17 @@ description:
>    isn't cleared, the watchdog will reset the system unless the watchdog
>    reset is disabled.
>  
> -allOf:
> -  - $ref: watchdog.yaml#
> -
>  properties:
>    compatible:
> -    enum:
> -      - starfive,jh7100-wdt
> -      - starfive,jh7110-wdt
> +    oneOf:
> +      - items:

Drop items, it wasn't here in the first place.

> +          - enum:
> +              - starfive,jh7100-wdt
> +              - starfive,jh7110-wdt
> +      - items:
> +          - enum:
> +              - starfive,jh8100-wdt
> +          - const: starfive,jh7110-wdt
>  
>    reg:
>      maxItems: 1
> @@ -45,10 +48,33 @@ properties:
>        - const: core
>  
>    resets:
> +    minItems: 1
>      items:
>        - description: APB reset
>        - description: Core reset

This is not valid for jh8100. Move it to else: part. Here maxItems: 2.

>  
> +allOf:

allOf goes after required:, see example-schema

> +  - $ref: watchdog.yaml#
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - starfive,jh8100-wdt
> +    then:
> +      properties:
> +        resets:
> +          description: |
> +            Must contain Core reset entry.
> +          maxItems: 1

Instead of both, items: with description.

> +    else:
> +      properties:
> +        resets:
> +          description: |
> +            Must contain APB reset and Core reset entry.
> +          minItems: 2
> +
>  required:
>    - compatible
>    - reg
> @@ -69,3 +95,13 @@ examples:
>          resets = <&rst 99>,
>                   <&rst 100>;
>      };
> +
> +  - |
> +    watchdog@12270000 {
> +        compatible = "starfive,jh8100-wdt", "starfive,jh7110-wdt";
> +        reg = <0x12270000 0x10000>;
> +        clocks = <&clk 78>,
> +                 <&clk 79>;

No need for new example with difference in one property.

Best regards,
Krzysztof


  reply	other threads:[~2023-12-14  7:39 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-14  3:30 [PATCH v3 0/1] Add StarFive JH8100 watchdog Ji Sheng Teoh
2023-12-14  3:30 ` [PATCH v3 1/1] dt-bindings: watchdog: starfive,jh7100-wdt: Add compatible for JH8100 Ji Sheng Teoh
2023-12-14  7:39   ` Krzysztof Kozlowski [this message]
2023-12-15  7:25     ` Ji Sheng Teoh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=40b5d1a8-37d2-4c68-8d16-33c92c3e5716@linaro.org \
    --to=krzysztof.kozlowski@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jisheng.teoh@starfivetech.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=leyfoon.tan@starfivetech.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    --cc=samin.guo@starfivetech.com \
    --cc=wim@linux-watchdog.org \
    --cc=xingyu.wu@starfivetech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).