Re: [PATCH v5 0/2] Basic support for TI TDP158

[Marc Gonzalez <mgonzalez@freebox.fr>]

On 03/09/2024 14:40, Robert Foss wrote:

> On Mon, 12 Aug 2024 16:51:00 +0200, Marc Gonzalez wrote:
>
>> TDP158 is an AC-coupled DVI / HDMI to TMDS level shifting Redriver.
>>
>> Like the TFP410, the TDP158 can be set up in 2 different ways:
>> 1) hard-coding its configuration settings using pin-strapping resistors
>> 2) placing it on an I2C bus, and defer set-up until run-time
>>
>> The mode is selected by pin 8 = I2C_EN
>> I2C_EN = 1 ==> I2C Control Mode
>> I2C_EN = 0 ==> Pin Strap Mode
>>
>> [...]
> 
> Applied, thanks!
> 
> [1/2] dt-bindings: display: bridge: add TI TDP158
>       https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/887665792b99
> [2/2] drm/bridge: add support for TI TDP158
>       https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/a15710027afb

Hello Robert,

I expected this series to be included in v6.12-rc1, since you applied it
before the v6.12 merge window opened. Did I misunderstand the process?

If not in v6.12, does that mean it will be in v6.13?

Regards