* [PATCH v3 0/2] SM8350 VIDEOCC
@ 2023-04-19 12:53 Konrad Dybcio
2023-04-19 12:53 ` [PATCH v3 1/2] dt-bindings: clock: Add " Konrad Dybcio
2023-04-19 12:53 ` [PATCH v3 2/2] clk: qcom: Introduce " Konrad Dybcio
0 siblings, 2 replies; 5+ messages in thread
From: Konrad Dybcio @ 2023-04-19 12:53 UTC (permalink / raw)
To: Bjorn Andersson, Andy Gross, Michael Turquette, Stephen Boyd,
Rob Herring, Krzysztof Kozlowski, Philipp Zabel, Taniya Das
Cc: Marijn Suijten, linux-arm-msm, linux-clk, devicetree,
linux-kernel, Konrad Dybcio
v2 -> v3:
- Use a consistent VIDEO_CC_ prefix for resets
- Separate out the binding (and don't pick up the rb as a consequence)
- drop all pm_clks code
v2: https://lore.kernel.org/r/20230413-topic-lahaina_vidcc-v2-0-f721d507e555@linaro.org
v1 -> v2:
- "){" -> ") {"
- subsys_initcall -> module_platform_driver
- constify lucid_5lpe_vco & .hw.init
- devm_add_action_or_reset -> devm_pm_runtime_enable
v1: https://lore.kernel.org/r/20230413-topic-lahaina_vidcc-v1-0-134f9b22a5b3@linaro.org
This serires brings support for SM8350 videocc and updates the
related dt-bindings.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Konrad Dybcio (2):
dt-bindings: clock: Add SM8350 VIDEOCC
clk: qcom: Introduce SM8350 VIDEOCC
.../bindings/clock/qcom,sm8350-videocc.yaml | 81 +++
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/videocc-sm8350.c | 552 +++++++++++++++++++++
include/dt-bindings/clock/qcom,sm8350-videocc.h | 35 ++
include/dt-bindings/reset/qcom,sm8350-videocc.h | 18 +
6 files changed, 696 insertions(+)
---
base-commit: 67d5d9f013d6c3829383c08162939cabff14fccc
change-id: 20230413-topic-lahaina_vidcc-bcdabb475542
Best regards,
--
Konrad Dybcio <konrad.dybcio@linaro.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v3 1/2] dt-bindings: clock: Add SM8350 VIDEOCC
2023-04-19 12:53 [PATCH v3 0/2] SM8350 VIDEOCC Konrad Dybcio
@ 2023-04-19 12:53 ` Konrad Dybcio
2023-04-20 15:46 ` Krzysztof Kozlowski
2023-04-19 12:53 ` [PATCH v3 2/2] clk: qcom: Introduce " Konrad Dybcio
1 sibling, 1 reply; 5+ messages in thread
From: Konrad Dybcio @ 2023-04-19 12:53 UTC (permalink / raw)
To: Bjorn Andersson, Andy Gross, Michael Turquette, Stephen Boyd,
Rob Herring, Krzysztof Kozlowski, Philipp Zabel, Taniya Das
Cc: Marijn Suijten, linux-arm-msm, linux-clk, devicetree,
linux-kernel, Konrad Dybcio
SM8350, like most recent higher-end chips has a separate clock
controller block just for the Venus IP. Document it.
The binding was separated as the driver, unlike the earlier ones, doesn't
expect clock-names to keep it easier to maintain.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../bindings/clock/qcom,sm8350-videocc.yaml | 81 ++++++++++++++++++++++
include/dt-bindings/clock/qcom,sm8350-videocc.h | 35 ++++++++++
include/dt-bindings/reset/qcom,sm8350-videocc.h | 18 +++++
3 files changed, 134 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
new file mode 100644
index 000000000000..28a1002b1563
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8350-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Video Clock & Reset Controller
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+ Qualcomm video clock control module provides the clocks, resets and power
+ domains on Qualcomm SoCs.
+
+ See also::
+ include/dt-bindings/clock/qcom,videocc-sm8350.h
+ include/dt-bindings/reset/qcom,videocc-sm8350.h
+
+properties:
+ compatible:
+ const: qcom,sm8350-videocc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board active XO source
+ - description: Board sleep clock
+
+ power-domains:
+ description:
+ A phandle and PM domain specifier for the MMCX power domain.
+ maxItems: 1
+
+ required-opps:
+ description:
+ A phandle to an OPP node describing required MMCX performance point.
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+ - required-opps
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ clock-controller@abf0000 {
+ compatible = "qcom,sm8350-videocc";
+ reg = <0x0abf0000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/include/dt-bindings/clock/qcom,sm8350-videocc.h b/include/dt-bindings/clock/qcom,sm8350-videocc.h
new file mode 100644
index 000000000000..b6945a448676
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,sm8350-videocc.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8350_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8350_H
+
+/* Clocks */
+#define VIDEO_CC_AHB_CLK_SRC 0
+#define VIDEO_CC_MVS0_CLK 1
+#define VIDEO_CC_MVS0_CLK_SRC 2
+#define VIDEO_CC_MVS0_DIV_CLK_SRC 3
+#define VIDEO_CC_MVS0C_CLK 4
+#define VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC 5
+#define VIDEO_CC_MVS1_CLK 6
+#define VIDEO_CC_MVS1_CLK_SRC 7
+#define VIDEO_CC_MVS1_DIV2_CLK 8
+#define VIDEO_CC_MVS1_DIV_CLK_SRC 9
+#define VIDEO_CC_MVS1C_CLK 10
+#define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 11
+#define VIDEO_CC_SLEEP_CLK 12
+#define VIDEO_CC_SLEEP_CLK_SRC 13
+#define VIDEO_CC_XO_CLK_SRC 14
+#define VIDEO_PLL0 15
+#define VIDEO_PLL1 16
+
+/* GDSCs */
+#define MVS0C_GDSC 0
+#define MVS1C_GDSC 1
+#define MVS0_GDSC 2
+#define MVS1_GDSC 3
+
+#endif
diff --git a/include/dt-bindings/reset/qcom,sm8350-videocc.h b/include/dt-bindings/reset/qcom,sm8350-videocc.h
new file mode 100644
index 000000000000..cd356b207a4a
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,sm8350-videocc.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_RESET_QCOM_VIDEO_CC_SM8350_H
+#define _DT_BINDINGS_RESET_QCOM_VIDEO_CC_SM8350_H
+
+#define VIDEO_CC_CVP_INTERFACE_BCR 0
+#define VIDEO_CC_CVP_MVS0_BCR 1
+#define VIDEO_CC_MVS0C_CLK_ARES 2
+#define VIDEO_CC_CVP_MVS0C_BCR 3
+#define VIDEO_CC_CVP_MVS1_BCR 4
+#define VIDEO_CC_MVS1C_CLK_ARES 5
+#define VIDEO_CC_CVP_MVS1C_BCR 6
+
+#endif
--
2.40.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3 2/2] clk: qcom: Introduce SM8350 VIDEOCC
2023-04-19 12:53 [PATCH v3 0/2] SM8350 VIDEOCC Konrad Dybcio
2023-04-19 12:53 ` [PATCH v3 1/2] dt-bindings: clock: Add " Konrad Dybcio
@ 2023-04-19 12:53 ` Konrad Dybcio
2023-04-20 10:33 ` Dmitry Baryshkov
1 sibling, 1 reply; 5+ messages in thread
From: Konrad Dybcio @ 2023-04-19 12:53 UTC (permalink / raw)
To: Bjorn Andersson, Andy Gross, Michael Turquette, Stephen Boyd,
Rob Herring, Krzysztof Kozlowski, Philipp Zabel, Taniya Das
Cc: Marijn Suijten, linux-arm-msm, linux-clk, devicetree,
linux-kernel, Konrad Dybcio
Add support for the Video Clock Controller found on the SM8350 SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/videocc-sm8350.c | 552 ++++++++++++++++++++++++++++++++++++++
3 files changed, 562 insertions(+)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 12be3e2371b3..32e1302d86ab 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -925,6 +925,15 @@ config SM_VIDEOCC_8250
Say Y if you want to support video devices and functionality such as
video encode and decode.
+config SM_VIDEOCC_8350
+ tristate "SM8350 Video Clock Controller"
+ select SM_GCC_8350
+ select QCOM_GDSC
+ help
+ Support for the video clock controller on SM8350 devices.
+ Say Y if you want to support video devices and functionality such as
+ video encode and decode.
+
config SPMI_PMIC_CLKDIV
tristate "SPMI PMIC clkdiv Support"
depends on SPMI || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 9ff4c373ad95..79405b19b85d 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -127,6 +127,7 @@ obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o
obj-$(CONFIG_SM_TCSRCC_8550) += tcsrcc-sm8550.o
obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
+obj-$(CONFIG_SM_VIDEOCC_8350) += videocc-sm8350.o
obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/videocc-sm8350.c b/drivers/clk/qcom/videocc-sm8350.c
new file mode 100644
index 000000000000..b148877fc73d
--- /dev/null
+++ b/drivers/clk/qcom/videocc-sm8350.c
@@ -0,0 +1,552 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,sm8350-videocc.h>
+#include <dt-bindings/reset/qcom,sm8350-videocc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "common.h"
+#include "reset.h"
+#include "gdsc.h"
+
+enum {
+ DT_BI_TCXO,
+ DT_BI_TCXO_AO,
+ DT_SLEEP_CLK,
+};
+
+enum {
+ P_BI_TCXO,
+ P_BI_TCXO_AO,
+ P_SLEEP_CLK,
+ P_VIDEO_PLL0_OUT_MAIN,
+ P_VIDEO_PLL1_OUT_MAIN,
+};
+
+static const struct pll_vco lucid_5lpe_vco[] = {
+ { 249600000, 1750000000, 0 },
+};
+
+static const struct alpha_pll_config video_pll0_config = {
+ .l = 0x25,
+ .alpha = 0x8000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002261,
+ .config_ctl_hi1_val = 0x2a9a699c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000000,
+ .test_ctl_hi1_val = 0x01800000,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00000805,
+ .user_ctl_hi1_val = 0x00000000,
+};
+
+static struct clk_alpha_pll video_pll0 = {
+ .offset = 0x42c,
+ .vco_table = lucid_5lpe_vco,
+ .num_vco = ARRAY_SIZE(lucid_5lpe_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_pll0",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_5lpe_ops,
+ },
+ },
+};
+
+static const struct alpha_pll_config video_pll1_config = {
+ .l = 0x2b,
+ .alpha = 0xc000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002261,
+ .config_ctl_hi1_val = 0x2a9a699c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000000,
+ .test_ctl_hi1_val = 0x01800000,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00000805,
+ .user_ctl_hi1_val = 0x00000000,
+};
+
+static struct clk_alpha_pll video_pll1 = {
+ .offset = 0x7d0,
+ .vco_table = lucid_5lpe_vco,
+ .num_vco = ARRAY_SIZE(lucid_5lpe_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_pll1",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_5lpe_ops,
+ },
+ },
+};
+
+static const struct parent_map video_cc_parent_map_0[] = {
+ { P_BI_TCXO_AO, 0 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_0[] = {
+ { .index = DT_BI_TCXO_AO },
+};
+
+static const struct parent_map video_cc_parent_map_1[] = {
+ { P_BI_TCXO, 0 },
+ { P_VIDEO_PLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_1[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &video_pll0.clkr.hw },
+};
+
+static const struct parent_map video_cc_parent_map_2[] = {
+ { P_BI_TCXO, 0 },
+ { P_VIDEO_PLL1_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_2[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &video_pll1.clkr.hw },
+};
+
+static const struct freq_tbl ftbl_video_cc_ahb_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_ahb_clk_src = {
+ .cmd_rcgr = 0xbd4,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_0,
+ .freq_tbl = ftbl_video_cc_ahb_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_ahb_clk_src",
+ .parent_data = video_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs0_clk_src[] = {
+ F(720000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+ F(1014000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+ F(1098000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+ F(1332000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_mvs0_clk_src = {
+ .cmd_rcgr = 0xb94,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_1,
+ .freq_tbl = ftbl_video_cc_mvs0_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_clk_src",
+ .parent_data = video_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs1_clk_src[] = {
+ F(840000000, P_VIDEO_PLL1_OUT_MAIN, 1, 0, 0),
+ F(1098000000, P_VIDEO_PLL1_OUT_MAIN, 1, 0, 0),
+ F(1332000000, P_VIDEO_PLL1_OUT_MAIN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_mvs1_clk_src = {
+ .cmd_rcgr = 0xbb4,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_2,
+ .freq_tbl = ftbl_video_cc_mvs1_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_clk_src",
+ .parent_data = video_cc_parent_data_2,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_2),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_video_cc_sleep_clk_src[] = {
+ F(32000, P_SLEEP_CLK, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_sleep_clk_src = {
+ .cmd_rcgr = 0xef0,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .freq_tbl = ftbl_video_cc_sleep_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_sleep_clk_src",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_SLEEP_CLK,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 video_cc_xo_clk_src = {
+ .cmd_rcgr = 0xecc,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_0,
+ .freq_tbl = ftbl_video_cc_ahb_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_xo_clk_src",
+ .parent_data = video_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs0_div_clk_src = {
+ .reg = 0xd54,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]){
+ &video_cc_mvs0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs0c_div2_div_clk_src = {
+ .reg = 0xc54,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0c_div2_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]){
+ &video_cc_mvs0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs1_div_clk_src = {
+ .reg = 0xdd4,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]){
+ &video_cc_mvs1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs1c_div2_div_clk_src = {
+ .reg = 0xcf4,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1c_div2_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]){
+ &video_cc_mvs1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_branch video_cc_mvs0_clk = {
+ .halt_reg = 0xd34,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0xd34,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0xd34,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &video_cc_mvs0_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0c_clk = {
+ .halt_reg = 0xc34,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xc34,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0c_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &video_cc_mvs0c_div2_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1_clk = {
+ .halt_reg = 0xdb4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0xdb4,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0xdb4,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &video_cc_mvs1_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1_div2_clk = {
+ .halt_reg = 0xdf4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0xdf4,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0xdf4,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_div2_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &video_cc_mvs1c_div2_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1c_clk = {
+ .halt_reg = 0xcd4,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xcd4,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1c_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &video_cc_mvs1c_div2_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_sleep_clk = {
+ .halt_reg = 0xf10,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xf10,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_sleep_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &video_cc_sleep_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc mvs0c_gdsc = {
+ .gdscr = 0xbf8,
+ .pd = {
+ .name = "mvs0c_gdsc",
+ },
+ .flags = RETAIN_FF_ENABLE,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mvs1c_gdsc = {
+ .gdscr = 0xc98,
+ .pd = {
+ .name = "mvs1c_gdsc",
+ },
+ .flags = RETAIN_FF_ENABLE,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mvs0_gdsc = {
+ .gdscr = 0xd18,
+ .pd = {
+ .name = "mvs0_gdsc",
+ },
+ .flags = HW_CTRL | RETAIN_FF_ENABLE,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mvs1_gdsc = {
+ .gdscr = 0xd98,
+ .pd = {
+ .name = "mvs1_gdsc",
+ },
+ .flags = HW_CTRL | RETAIN_FF_ENABLE,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct clk_regmap *video_cc_sm8350_clocks[] = {
+ [VIDEO_CC_AHB_CLK_SRC] = &video_cc_ahb_clk_src.clkr,
+ [VIDEO_CC_MVS0_CLK] = &video_cc_mvs0_clk.clkr,
+ [VIDEO_CC_MVS0_CLK_SRC] = &video_cc_mvs0_clk_src.clkr,
+ [VIDEO_CC_MVS0_DIV_CLK_SRC] = &video_cc_mvs0_div_clk_src.clkr,
+ [VIDEO_CC_MVS0C_CLK] = &video_cc_mvs0c_clk.clkr,
+ [VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC] = &video_cc_mvs0c_div2_div_clk_src.clkr,
+ [VIDEO_CC_MVS1_CLK] = &video_cc_mvs1_clk.clkr,
+ [VIDEO_CC_MVS1_CLK_SRC] = &video_cc_mvs1_clk_src.clkr,
+ [VIDEO_CC_MVS1_DIV2_CLK] = &video_cc_mvs1_div2_clk.clkr,
+ [VIDEO_CC_MVS1_DIV_CLK_SRC] = &video_cc_mvs1_div_clk_src.clkr,
+ [VIDEO_CC_MVS1C_CLK] = &video_cc_mvs1c_clk.clkr,
+ [VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC] = &video_cc_mvs1c_div2_div_clk_src.clkr,
+ [VIDEO_CC_SLEEP_CLK] = &video_cc_sleep_clk.clkr,
+ [VIDEO_CC_SLEEP_CLK_SRC] = &video_cc_sleep_clk_src.clkr,
+ [VIDEO_CC_XO_CLK_SRC] = &video_cc_xo_clk_src.clkr,
+ [VIDEO_PLL0] = &video_pll0.clkr,
+ [VIDEO_PLL1] = &video_pll1.clkr,
+};
+
+static const struct qcom_reset_map video_cc_sm8350_resets[] = {
+ [VIDEO_CC_CVP_INTERFACE_BCR] = { 0xe54 },
+ [VIDEO_CC_CVP_MVS0_BCR] = { 0xd14 },
+ [VIDEO_CC_MVS0C_CLK_ARES] = { 0xc34, 2 },
+ [VIDEO_CC_CVP_MVS0C_BCR] = { 0xbf4 },
+ [VIDEO_CC_CVP_MVS1_BCR] = { 0xd94 },
+ [VIDEO_CC_MVS1C_CLK_ARES] = { 0xcd4, 2 },
+ [VIDEO_CC_CVP_MVS1C_BCR] = { 0xc94 },
+};
+
+static struct gdsc *video_cc_sm8350_gdscs[] = {
+ [MVS0C_GDSC] = &mvs0c_gdsc,
+ [MVS1C_GDSC] = &mvs1c_gdsc,
+ [MVS0_GDSC] = &mvs0_gdsc,
+ [MVS1_GDSC] = &mvs1_gdsc,
+};
+
+static const struct regmap_config video_cc_sm8350_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x10000,
+ .fast_io = true,
+};
+
+static struct qcom_cc_desc video_cc_sm8350_desc = {
+ .config = &video_cc_sm8350_regmap_config,
+ .clks = video_cc_sm8350_clocks,
+ .num_clks = ARRAY_SIZE(video_cc_sm8350_clocks),
+ .resets = video_cc_sm8350_resets,
+ .num_resets = ARRAY_SIZE(video_cc_sm8350_resets),
+ .gdscs = video_cc_sm8350_gdscs,
+ .num_gdscs = ARRAY_SIZE(video_cc_sm8350_gdscs),
+};
+
+static int video_cc_sm8350_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+ int ret;
+
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret)
+ return ret;
+
+ regmap = qcom_cc_map(pdev, &video_cc_sm8350_desc);
+ if (IS_ERR(regmap)) {
+ pm_runtime_put(&pdev->dev);
+ return PTR_ERR(regmap);
+ }
+
+ clk_lucid_pll_configure(&video_pll0, regmap, &video_pll0_config);
+ clk_lucid_pll_configure(&video_pll1, regmap, &video_pll1_config);
+
+ /*
+ * Keep clocks always enabled:
+ * video_cc_ahb_clk
+ * video_cc_xo_clk
+ */
+ regmap_update_bits(regmap, 0xe58, BIT(0), BIT(0));
+ regmap_update_bits(regmap, 0xeec, BIT(0), BIT(0));
+
+ ret = qcom_cc_really_probe(pdev, &video_cc_sm8350_desc, regmap);
+ pm_runtime_put(&pdev->dev);
+
+ return ret;
+}
+
+static const struct of_device_id video_cc_sm8350_match_table[] = {
+ { .compatible = "qcom,sm8350-videocc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, video_cc_sm8350_match_table);
+
+static struct platform_driver video_cc_sm8350_driver = {
+ .probe = video_cc_sm8350_probe,
+ .driver = {
+ .name = "sm8350-videocc",
+ .of_match_table = video_cc_sm8350_match_table,
+ },
+};
+module_platform_driver(video_cc_sm8350_driver);
+
+MODULE_DESCRIPTION("QTI SM8350 VIDEOCC Driver");
+MODULE_LICENSE("GPL");
--
2.40.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v3 2/2] clk: qcom: Introduce SM8350 VIDEOCC
2023-04-19 12:53 ` [PATCH v3 2/2] clk: qcom: Introduce " Konrad Dybcio
@ 2023-04-20 10:33 ` Dmitry Baryshkov
0 siblings, 0 replies; 5+ messages in thread
From: Dmitry Baryshkov @ 2023-04-20 10:33 UTC (permalink / raw)
To: Konrad Dybcio, Bjorn Andersson, Andy Gross, Michael Turquette,
Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Philipp Zabel,
Taniya Das
Cc: Marijn Suijten, linux-arm-msm, linux-clk, devicetree,
linux-kernel
On 19/04/2023 15:53, Konrad Dybcio wrote:
> Add support for the Video Clock Controller found on the SM8350 SoC.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> drivers/clk/qcom/Kconfig | 9 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/videocc-sm8350.c | 552 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 562 insertions(+)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: clock: Add SM8350 VIDEOCC
2023-04-19 12:53 ` [PATCH v3 1/2] dt-bindings: clock: Add " Konrad Dybcio
@ 2023-04-20 15:46 ` Krzysztof Kozlowski
0 siblings, 0 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 15:46 UTC (permalink / raw)
To: Konrad Dybcio, Bjorn Andersson, Andy Gross, Michael Turquette,
Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Philipp Zabel,
Taniya Das
Cc: Marijn Suijten, linux-arm-msm, linux-clk, devicetree,
linux-kernel
On 19/04/2023 14:53, Konrad Dybcio wrote:
> SM8350, like most recent higher-end chips has a separate clock
> controller block just for the Venus IP. Document it.
>
> The binding was separated as the driver, unlike the earlier ones, doesn't
> expect clock-names to keep it easier to maintain.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> .../bindings/clock/qcom,sm8350-videocc.yaml | 81 ++++++++++++++++++++++
> include/dt-bindings/clock/qcom,sm8350-videocc.h | 35 ++++++++++
> include/dt-bindings/reset/qcom,sm8350-videocc.h | 18 +++++
> 3 files changed, 134 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
> new file mode 100644
> index 000000000000..28a1002b1563
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,sm8350-videocc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SM8350 Video Clock & Reset Controller
> +
> +maintainers:
> + - Konrad Dybcio <konrad.dybcio@linaro.org>
> +
> +description: |
> + Qualcomm video clock control module provides the clocks, resets and power
> + domains on Qualcomm SoCs.
> +
> + See also::
> + include/dt-bindings/clock/qcom,videocc-sm8350.h
> + include/dt-bindings/reset/qcom,videocc-sm8350.h
> +
> +properties:
> + compatible:
> + const: qcom,sm8350-videocc
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Board XO source
> + - description: Board active XO source
> + - description: Board sleep clock
> +
> + power-domains:
> + description:
> + A phandle and PM domain specifier for the MMCX power domain.
> + maxItems: 1
> +
> + required-opps:
> + description:
> + A phandle to an OPP node describing required MMCX performance point.
> + maxItems: 1
> +
> + '#clock-cells':
> + const: 1
> +
> + '#reset-cells':
> + const: 1
> +
> + '#power-domain-cells':
> + const: 1
Everything is the same as gcc.yaml, so add a allOf:$ref to it, drop
unnecessary properties and use unevaluatedProperties: false.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-04-20 15:46 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-04-19 12:53 [PATCH v3 0/2] SM8350 VIDEOCC Konrad Dybcio
2023-04-19 12:53 ` [PATCH v3 1/2] dt-bindings: clock: Add " Konrad Dybcio
2023-04-20 15:46 ` Krzysztof Kozlowski
2023-04-19 12:53 ` [PATCH v3 2/2] clk: qcom: Introduce " Konrad Dybcio
2023-04-20 10:33 ` Dmitry Baryshkov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).