Re: [PATCH v3 1/3] dt-bindings: pinctrl: Add support for Amlogic A4 SoCs

[Xianwei Zhao <xianwei.zhao@amlogic.com>]

Hi Jerome,
    Thanks for your reply.

On 2024/10/18 16:39, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
> 
> On Fri 18 Oct 2024 at 10:28, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> 
>> On 18/10/2024 10:10, Xianwei Zhao via B4 Relay wrote:
>>> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>>
>>> Add the new compatible name for Amlogic A4 pin controller, and add
>>> a new dt-binding header file which document the detail pin names.
> 
> the change does not do what is described here. At least the description
> needs updating.
> 

Will do.

> So if the pin definition is now in the driver, does it mean that pins have
> to be referenced in DT directly using the made up numbers that are
> created in pinctrl-amlogic-a4.c at the beginning of patch #2 ?
> 

Yes.

> If that's case, it does not look very easy a read.
> 

It does happen. The pin definition does not fall under the category of 
binding.

https://lore.kernel.org/all/106f4321-59e8-49b9-bad3-eeb57627c921@amlogic.com/

>>>
>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>
>> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>
>> Best regards,
>> Krzysztof
> 
> --
> Jerome