[PATCH v10 0/3] Introduce USB DT support for SM8750

[PATCH v10 0/3] Introduce USB DT support for SM8750

[Krishna Kurapati]

Add support for the PHYs and controllers used for USB on SM8750 SoCs.

Version-6 of this series has all the binding/driver/dt patches acked.
But only the phy changes have been merged.

Version 7 was a rebase to get acked patches merged. But comments came
in to use flattened bindings.

The v8 for usb bindings patch has been split and sent out separately [1]
and it is ACKed.

On v10, the pmic glink changes and usb role switch support are added while
addressing some comments obtained.

Defconfig patch has been resent by Jingyi on [2].

---
Changes in v10:
- Squashed pmic-glink changes from [3] in this series.
- Added remote endpoints between connector and usb nodes.
- Added Jishnu's CDB & SOB tag to credit for pmic glink changes.
- Renamed "usb_1"  to "usb" as per comments from Bjorn.
- Added QMP Phy pipe clock in GCC properties as per comments from Dmitry.
- Link to v9: https://lore.kernel.org/all/20251024151521.2365845-1-krishna.kurapati@oss.qualcomm.com/

Changes in v9:
- Updated commit tags (Removed Suggested-by of Konrad andadded his SoB)
- Confirmed with Konrad offline before adding his Signed-off-by
- Updated commit text in patch 1/3 as per suggestion from Bjorn.
- Link to v8: https://lore.kernel.org/all/20251022084052.218043-1-krishna.kurapati@oss.qualcomm.com/

Changes in v8:
- Using Flattened DT representation.
- Removed obtained RB tags since the code has changed significantly.
- Modified Author mail address from quicinc to oss.qualcomm.com
- Link to v7: https://lore.kernel.org/all/20251015105231.2819727-1-krishna.kurapati@oss.qualcomm.com/

Changes in v7:
- Rebased on top of linux next
- Split usb patch and sent out separately.
- Link to v6: https://lore.kernel.org/all/20250527-sm8750_usb_master-v6-0-d58de3b41d34@oss.qualcomm.com/

Changes in v6:
- Change readl_relaxed/writel_relaxed calls to just readl/writel in the readback function
- Updated languange in the defconfig commit to specify SM8750 as a Qualcomm SoC
- Link to v5: https://lore.kernel.org/r/20250421-sm8750_usb_master-v5-0-25c79ed01d02@oss.qualcomm.com

Changes in v5:
- Removed refclk_src from the QMP PHY driver as that is no longer used.
- The decision to move the TCSR clkref property from controller --> phy
node was made in v4, and the refclk_src was a lingering change that was
meant to be removed.  CXO is the parent clock for TCSR clkref, so CXO
clk will be voted for as well.
- Relocate the SM8750 compatible within the qcom,dwc3 bindings.  This is
to take into account the change in clock list.
- Link to v4: https://lore.kernel.org/r/20250409-sm8750_usb_master-v4-0-6ec621c98be6@oss.qualcomm.com

Changes in v4:
- Made some fixups to the M31 eUSB2 driver
- Moved TCSR refclk_en to the QMP PHY DT node
- Link to v3: https://lore.kernel.org/r/20250324-sm8750_usb_master-v3-0-13e096dc88fd@quicinc.com

Changes in v3:
- Split platform DTs into separate commits.
- Fixed up M31 eUSB2 PHY driver with feedback received.
- Reordered DT properties based on feedback.
- Rewrote commit message for enabling EUSB driver.
- Link to v2: https://lore.kernel.org/r/20250304-sm8750_usb_master-v2-0-a698a2e68e06@quicinc.com

Changes in v2:
- Added new QMP PHY register definitions for v8 based QMP phys.
- Made changes to clean up some code in the M31 eUSB2 PHY driver based
on feedback received.
- Added bulk regulator operations in M31 eUSB2 PHY, to ensure that
both the vdd and vdda12 regulators are properly voted for.
- Removed external references to other dt bindings in M31 example for
the DT bindings change.
- Split DT patches between SoC and plaform changes, as well as the
PHY subsystem Kconfig changes when introducing the M31 eUSB2 PHY.
- Added orientation switch and port definitions in the DT changes.EDITME: describe what is new in this series revision.
- Link to v1: https://lore.kernel.org/r/20250113-sm8750_usb_master-v1-0-09afe1dc2524@quicinc.com

[1]: https://lore.kernel.org/all/20251021050954.3462613-1-krishna.kurapati@oss.qualcomm.com/
[2]: https://lore.kernel.org/all/20251021-knp-usb-v2-4-a2809fffcfab@oss.qualcomm.com/
[3]: https://lore.kernel.org/all/20250113-sm8750_gpmic_master-v1-2-ef45cf206979@quicinc.com/

Wesley Cheng (3):
  arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs
  arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform
  arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform

 arch/arm64/boot/dts/qcom/sm8750-mtp.dts |  73 +++++++++++
 arch/arm64/boot/dts/qcom/sm8750-qrd.dts |  73 +++++++++++
 arch/arm64/boot/dts/qcom/sm8750.dtsi    | 161 +++++++++++++++++++++++-
 3 files changed, 306 insertions(+), 1 deletion(-)

-- 
2.34.1

[PATCH v10 1/3] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Krishna Kurapati]

From: Wesley Cheng <wesley.cheng@oss.qualcomm.com>

SM8750 chipset contains a single DWC3 USB3 controller (rev. 200a), SS
QMP PHY (rev. v8) and M31 eUSB2 PHY.  The major difference for SM8750 is
the transition to using the M31 eUSB2 PHY compared to previous SoCs.

Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.

Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
[Konrad: Provided diff to flattened USB node]
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750.dtsi | 161 ++++++++++++++++++++++++++-
 1 file changed, 160 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index a82d9867c7cb..3f0b57f428bb 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,gpr.h>
@@ -635,7 +636,7 @@ gcc: clock-controller@100000 {
 				 <0>,
 				 <0>,
 				 <0>,
-				 <0>;
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -2581,6 +2582,164 @@ data-pins {
 			};
 		};
 
+		usb_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8750-m31-eusb2-phy";
+			reg = <0x0 0x88e3000 0x0 0x29c>;
+
+			clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8750-qmp-usb3-dp-phy";
+			reg = <0x0 0x088e8000 0x0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&tcsrcc TCSR_USB3_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb: usb@a600000 {
+			compatible = "qcom,sm8750-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a600000 0x0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>,
+					       <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			iommus = <&apps_smmu 0x40 0x0>;
+
+			phys = <&usb_hsphy>,
+			       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy",
+				    "usb3-phy";
+
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,usb2-gadget-lpm-disable;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,usb3_lpm_capable;
+			snps,usb2-lpm-disable;
+			snps,has-lpm-erratum;
+			tx-fifo-resize;
+
+			dma-coherent;
+			usb-role-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dwc3_hs: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8750-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>;
-- 
2.34.1

[PATCH v10 2/3] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform

[Krishna Kurapati]

From: Wesley Cheng <wesley.cheng@oss.qualcomm.com>

Enable USB support on SM8750 MTP variant. Add the PMIC glink node with
connector to enable role switch support.

Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
[Konrad: Provided diff to flatten USB node on MTP]
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 73 +++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 45b5f7581567..932aeee70054 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -191,6 +191,51 @@ platform {
 		};
 	};
 
+	pmic-glink {
+		compatible = "qcom,sm8750-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+					};
+				};
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 
@@ -1200,3 +1245,31 @@ &ufs_mem_hc {
 
 	status = "okay";
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l2d_0p88>;
+	vdda12-supply = <&vreg_l3g_1p2>;
+
+	phys = <&pmih0108_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p88>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
-- 
2.34.1

[PATCH v10 3/3] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform

[Krishna Kurapati]

From: Wesley Cheng <wesley.cheng@oss.qualcomm.com>

Enable USB support on SM8750 QRD variant. Add the PMIC glink node with
connector to enable role switch support.

Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
[Konrad: Provided diff to flatten USB node on MTP]
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750-qrd.dts | 73 +++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
index 13c7b9664c89..c545695751db 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
@@ -193,6 +193,51 @@ platform {
 		};
 	};
 
+	pmic-glink {
+		compatible = "qcom,sm8750-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+					};
+				};
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 
@@ -1054,3 +1099,31 @@ &ufs_mem_hc {
 
 	status = "okay";
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l2d_0p88>;
+	vdda12-supply = <&vreg_l3g_1p2>;
+
+	phys = <&pmih0108_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p88>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
-- 
2.34.1

Re: [PATCH v10 2/3] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform

[Dmitry Baryshkov]

On Fri, Oct 31, 2025 at 06:03:53PM +0530, Krishna Kurapati wrote:
> From: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
> 
> Enable USB support on SM8750 MTP variant. Add the PMIC glink node with
> connector to enable role switch support.
> 
> Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
> [Konrad: Provided diff to flatten USB node on MTP]
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
> Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 73 +++++++++++++++++++++++++
>  1 file changed, 73 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
> index 45b5f7581567..932aeee70054 100644
> --- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
> @@ -191,6 +191,51 @@ platform {
>  		};
>  	};
>  
> +	pmic-glink {
> +		compatible = "qcom,sm8750-pmic-glink",
> +			     "qcom,sm8550-pmic-glink",
> +			     "qcom,pmic-glink";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
> +
> +		connector@0 {
> +			compatible = "usb-c-connector";
> +			reg = <0>;
> +
> +			power-role = "dual";
> +			data-role = "dual";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +
> +					pmic_glink_hs_in: endpoint {
> +						remote-endpoint = <&usb_dwc3_hs>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +
> +					pmic_glink_ss_in: endpoint {
> +						remote-endpoint = <&usb_dp_qmpphy_out>;
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <2>;
> +
> +					pmic_glink_sbu: endpoint {
> +					};
> +				};
> +			};
> +		};
> +	};
> +
>  	vph_pwr: vph-pwr-regulator {
>  		compatible = "regulator-fixed";
>  
> @@ -1200,3 +1245,31 @@ &ufs_mem_hc {
>  
>  	status = "okay";
>  };
> +
> +&usb {
> +	status = "okay";
> +};
> +
> +&usb_dwc3_hs {
> +	remote-endpoint = <&pmic_glink_hs_in>;
> +};
> +
> +&usb_hsphy {
> +	vdd-supply = <&vreg_l2d_0p88>;
> +	vdda12-supply = <&vreg_l3g_1p2>;
> +
> +	phys = <&pmih0108_eusb2_repeater>;
> +
> +	status = "okay";
> +};
> +
> +&usb_dp_qmpphy {
> +	vdda-phy-supply = <&vreg_l3g_1p2>;
> +	vdda-pll-supply = <&vreg_l2d_0p88>;
> +
> +	status = "okay";
> +};
> +
> +&usb_dp_qmpphy_out {
> +	remote-endpoint = <&pmic_glink_ss_in>;
> +};

usb_dp < usb_hsphy.

> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry

Re: [PATCH v10 3/3] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform

[Dmitry Baryshkov]

On Fri, Oct 31, 2025 at 06:03:54PM +0530, Krishna Kurapati wrote:
> From: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
> 
> Enable USB support on SM8750 QRD variant. Add the PMIC glink node with
> connector to enable role switch support.

Subject speaks about MTP.

> 
> Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
> [Konrad: Provided diff to flatten USB node on MTP]
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
> Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/sm8750-qrd.dts | 73 +++++++++++++++++++++++++
>  1 file changed, 73 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
> index 13c7b9664c89..c545695751db 100644
> --- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
> @@ -193,6 +193,51 @@ platform {
>  		};
>  	};
>  
> +	pmic-glink {
> +		compatible = "qcom,sm8750-pmic-glink",
> +			     "qcom,sm8550-pmic-glink",
> +			     "qcom,pmic-glink";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
> +
> +		connector@0 {
> +			compatible = "usb-c-connector";
> +			reg = <0>;
> +
> +			power-role = "dual";
> +			data-role = "dual";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +
> +					pmic_glink_hs_in: endpoint {
> +						remote-endpoint = <&usb_dwc3_hs>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +
> +					pmic_glink_ss_in: endpoint {
> +						remote-endpoint = <&usb_dp_qmpphy_out>;
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <2>;
> +
> +					pmic_glink_sbu: endpoint {
> +					};
> +				};
> +			};
> +		};
> +	};
> +
>  	vph_pwr: vph-pwr-regulator {
>  		compatible = "regulator-fixed";
>  
> @@ -1054,3 +1099,31 @@ &ufs_mem_hc {
>  
>  	status = "okay";
>  };
> +
> +&usb {
> +	status = "okay";
> +};
> +
> +&usb_dwc3_hs {
> +	remote-endpoint = <&pmic_glink_hs_in>;
> +};
> +
> +&usb_hsphy {
> +	vdd-supply = <&vreg_l2d_0p88>;
> +	vdda12-supply = <&vreg_l3g_1p2>;
> +
> +	phys = <&pmih0108_eusb2_repeater>;
> +
> +	status = "okay";
> +};
> +
> +&usb_dp_qmpphy {
> +	vdda-phy-supply = <&vreg_l3g_1p2>;
> +	vdda-pll-supply = <&vreg_l2d_0p88>;
> +
> +	status = "okay";
> +};
> +
> +&usb_dp_qmpphy_out {
> +	remote-endpoint = <&pmic_glink_ss_in>;
> +};

usb_dp < usb_hsphy

> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry

Re: [PATCH v10 3/3] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform

[Krishna Kurapati PSSNV]

On 10/31/2025 8:14 PM, Dmitry Baryshkov wrote:
> On Fri, Oct 31, 2025 at 06:03:54PM +0530, Krishna Kurapati wrote:
>> From: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
>>
>> Enable USB support on SM8750 QRD variant. Add the PMIC glink node with
>> connector to enable role switch support.
> 
> Subject speaks about MTP.
> 

My bad. Will fix it up.

Regards,
Krishna,

>>
>> Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
>> [Konrad: Provided diff to flatten USB node on MTP]
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>> Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
>> Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
>> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sm8750-qrd.dts | 73 +++++++++++++++++++++++++
>>   1 file changed, 73 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
>> index 13c7b9664c89..c545695751db 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
>> +++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
>> @@ -193,6 +193,51 @@ platform {
>>   		};
>>   	};
>>   
>> +	pmic-glink {
>> +		compatible = "qcom,sm8750-pmic-glink",
>> +			     "qcom,sm8550-pmic-glink",
>> +			     "qcom,pmic-glink";
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
>> +
>> +		connector@0 {
>> +			compatible = "usb-c-connector";
>> +			reg = <0>;
>> +
>> +			power-role = "dual";
>> +			data-role = "dual";
>> +
>> +			ports {
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +
>> +				port@0 {
>> +					reg = <0>;
>> +
>> +					pmic_glink_hs_in: endpoint {
>> +						remote-endpoint = <&usb_dwc3_hs>;
>> +					};
>> +				};
>> +
>> +				port@1 {
>> +					reg = <1>;
>> +
>> +					pmic_glink_ss_in: endpoint {
>> +						remote-endpoint = <&usb_dp_qmpphy_out>;
>> +					};
>> +				};
>> +
>> +				port@2 {
>> +					reg = <2>;
>> +
>> +					pmic_glink_sbu: endpoint {
>> +					};
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>>   	vph_pwr: vph-pwr-regulator {
>>   		compatible = "regulator-fixed";
>>   
>> @@ -1054,3 +1099,31 @@ &ufs_mem_hc {
>>   
>>   	status = "okay";
>>   };
>> +
>> +&usb {
>> +	status = "okay";
>> +};
>> +
>> +&usb_dwc3_hs {
>> +	remote-endpoint = <&pmic_glink_hs_in>;
>> +};
>> +
>> +&usb_hsphy {
>> +	vdd-supply = <&vreg_l2d_0p88>;
>> +	vdda12-supply = <&vreg_l3g_1p2>;
>> +
>> +	phys = <&pmih0108_eusb2_repeater>;
>> +
>> +	status = "okay";
>> +};
>> +
>> +&usb_dp_qmpphy {
>> +	vdda-phy-supply = <&vreg_l3g_1p2>;
>> +	vdda-pll-supply = <&vreg_l2d_0p88>;
>> +
>> +	status = "okay";
>> +};
>> +
>> +&usb_dp_qmpphy_out {
>> +	remote-endpoint = <&pmic_glink_ss_in>;
>> +};
> 
> usb_dp < usb_hsphy
> 
>> -- 
>> 2.34.1
>>
>