* [PATCH 0/2] arm64: dts: uniphier: UniPhier DT updates for Linux 4.7-rc1 @ 2016-04-15 10:30 Masahiro Yamada 2016-04-15 10:30 ` [PATCH 1/2] arm64: dts: uniphier: fix I2C nodes of PH1-LD20 Masahiro Yamada 2016-04-15 10:30 ` [PATCH 2/2] arm64: dts: uniphier: change release address of spin-table Masahiro Yamada 0 siblings, 2 replies; 8+ messages in thread From: Masahiro Yamada @ 2016-04-15 10:30 UTC (permalink / raw) To: arm Cc: Mark Rutland, devicetree, Pawel Moll, Ian Campbell, Catalin Marinas, Will Deacon, linux-kernel, Masahiro Yamada, Rob Herring, Kumar Gala, linux-arm-kernel Masahiro Yamada (2): arm64: dts: uniphier: fix I2C nodes of PH1-LD20 arm64: dts: uniphier: change release address of spin-table .../boot/dts/socionext/uniphier-ph1-ld20-ref.dts | 1 - .../boot/dts/socionext/uniphier-ph1-ld20.dtsi | 28 +++++++--------------- 2 files changed, 9 insertions(+), 20 deletions(-) -- 1.9.1 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] arm64: dts: uniphier: fix I2C nodes of PH1-LD20 2016-04-15 10:30 [PATCH 0/2] arm64: dts: uniphier: UniPhier DT updates for Linux 4.7-rc1 Masahiro Yamada @ 2016-04-15 10:30 ` Masahiro Yamada 2016-04-23 20:09 ` Arnd Bergmann 2016-04-15 10:30 ` [PATCH 2/2] arm64: dts: uniphier: change release address of spin-table Masahiro Yamada 1 sibling, 1 reply; 8+ messages in thread From: Masahiro Yamada @ 2016-04-15 10:30 UTC (permalink / raw) To: arm Cc: Mark Rutland, devicetree, Pawel Moll, Ian Campbell, Catalin Marinas, Will Deacon, linux-kernel, Masahiro Yamada, Rob Herring, Kumar Gala, linux-arm-kernel The I2C hardware blocks on this SoC are connected as follows: I2C0: external connection I2C1: external connection I2C2: internal connection I2C3: external connection I2C4: external connection I2C5: internal connection I2C6: no connection (not accessible) Delete pinctrl from Ch2, add pinctrl to Ch4, and remove the Ch6 node. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- .../boot/dts/socionext/uniphier-ph1-ld20-ref.dts | 1 - arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi | 20 +++++--------------- 2 files changed, 5 insertions(+), 16 deletions(-) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts index 727ae5f..b0ed443 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts @@ -70,7 +70,6 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; - i2c6 = &i2c6; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi index e682a3f..651c9d9 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi @@ -201,15 +201,12 @@ i2c2: i2c@58782000 { compatible = "socionext,uniphier-fi2c"; - status = "disabled"; reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; interrupts = <0 43 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; clocks = <&i2c_clk>; - clock-frequency = <100000>; + clock-frequency = <400000>; }; i2c3: i2c@58783000 { @@ -227,12 +224,15 @@ i2c4: i2c@58784000 { compatible = "socionext,uniphier-fi2c"; + status = "disabled"; reg = <0x58784000 0x80>; #address-cells = <1>; #size-cells = <0>; interrupts = <0 45 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; clocks = <&i2c_clk>; - clock-frequency = <400000>; + clock-frequency = <100000>; }; i2c5: i2c@58785000 { @@ -245,16 +245,6 @@ clock-frequency = <400000>; }; - i2c6: i2c@58786000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58786000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 26 4>; - clocks = <&i2c_clk>; - clock-frequency = <400000>; - }; - system_bus: system-bus@58c00000 { compatible = "socionext,uniphier-system-bus"; status = "disabled"; -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] arm64: dts: uniphier: fix I2C nodes of PH1-LD20 2016-04-15 10:30 ` [PATCH 1/2] arm64: dts: uniphier: fix I2C nodes of PH1-LD20 Masahiro Yamada @ 2016-04-23 20:09 ` Arnd Bergmann 0 siblings, 0 replies; 8+ messages in thread From: Arnd Bergmann @ 2016-04-23 20:09 UTC (permalink / raw) To: Masahiro Yamada Cc: arm, devicetree, Kumar Gala, linux-kernel, Ian Campbell, Rob Herring, Pawel Moll, Will Deacon, Mark Rutland, Catalin Marinas, linux-arm-kernel On Friday 15 April 2016 19:30:46 Masahiro Yamada wrote: > The I2C hardware blocks on this SoC are connected as follows: > > I2C0: external connection > I2C1: external connection > I2C2: internal connection > I2C3: external connection > I2C4: external connection > I2C5: internal connection > I2C6: no connection (not accessible) > > Delete pinctrl from Ch2, add pinctrl to Ch4, and remove the Ch6 node. > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> > Applied patch 1/2 to the fixes branch now, thanks! Arnd ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] arm64: dts: uniphier: change release address of spin-table 2016-04-15 10:30 [PATCH 0/2] arm64: dts: uniphier: UniPhier DT updates for Linux 4.7-rc1 Masahiro Yamada 2016-04-15 10:30 ` [PATCH 1/2] arm64: dts: uniphier: fix I2C nodes of PH1-LD20 Masahiro Yamada @ 2016-04-15 10:30 ` Masahiro Yamada [not found] ` <1460716247-28049-3-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org> 1 sibling, 1 reply; 8+ messages in thread From: Masahiro Yamada @ 2016-04-15 10:30 UTC (permalink / raw) To: arm Cc: Masahiro Yamada, devicetree, Kumar Gala, linux-kernel, Ian Campbell, Rob Herring, Pawel Moll, Will Deacon, Mark Rutland, Catalin Marinas, linux-arm-kernel The 8-byte register located at 0x59801200 on this SoC is dedicated for waking up secondary CPUs. We can use it and save normal memory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi index 651c9d9..f73b09e 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi @@ -77,7 +77,7 @@ compatible = "arm,cortex-a72", "arm,armv8"; reg = <0 0x000>; enable-method = "spin-table"; - cpu-release-addr = <0 0x80000100>; + cpu-release-addr = <0 0x59801200>; }; cpu1: cpu@1 { @@ -85,7 +85,7 @@ compatible = "arm,cortex-a72", "arm,armv8"; reg = <0 0x001>; enable-method = "spin-table"; - cpu-release-addr = <0 0x80000100>; + cpu-release-addr = <0 0x59801200>; }; cpu2: cpu@100 { @@ -93,7 +93,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x100>; enable-method = "spin-table"; - cpu-release-addr = <0 0x80000100>; + cpu-release-addr = <0 0x59801200>; }; cpu3: cpu@101 { @@ -101,7 +101,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x101>; enable-method = "spin-table"; - cpu-release-addr = <0 0x80000100>; + cpu-release-addr = <0 0x59801200>; }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
[parent not found: <1460716247-28049-3-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>]
* Re: [PATCH 2/2] arm64: dts: uniphier: change release address of spin-table [not found] ` <1460716247-28049-3-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org> @ 2016-04-15 13:05 ` Mark Rutland 2016-04-15 13:13 ` Masahiro Yamada 0 siblings, 1 reply; 8+ messages in thread From: Mark Rutland @ 2016-04-15 13:05 UTC (permalink / raw) To: Masahiro Yamada Cc: arm-DgEjT+Ai2ygdnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA, Kumar Gala, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Ian Campbell, Rob Herring, Pawel Moll, Will Deacon, Catalin Marinas, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On Fri, Apr 15, 2016 at 07:30:47PM +0900, Masahiro Yamada wrote: > The 8-byte register located at 0x59801200 on this SoC is dedicated > for waking up secondary CPUs. We can use it and save normal memory. Generally, it is not safe to use MMIO registers to back spin-table. The kernel maps the spin table location with cacheable attributes, so there may be speculative accesses to any registes in the same (64K) page, and a writeback may be larger than the 8-byte register width (which the device might not accept, triggering an SError). Given that, I do not think this is a good idea. Thanks, Mark. > > Signed-off-by: Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org> > --- > > arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi > index 651c9d9..f73b09e 100644 > --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi > +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi > @@ -77,7 +77,7 @@ > compatible = "arm,cortex-a72", "arm,armv8"; > reg = <0 0x000>; > enable-method = "spin-table"; > - cpu-release-addr = <0 0x80000100>; > + cpu-release-addr = <0 0x59801200>; > }; > > cpu1: cpu@1 { > @@ -85,7 +85,7 @@ > compatible = "arm,cortex-a72", "arm,armv8"; > reg = <0 0x001>; > enable-method = "spin-table"; > - cpu-release-addr = <0 0x80000100>; > + cpu-release-addr = <0 0x59801200>; > }; > > cpu2: cpu@100 { > @@ -93,7 +93,7 @@ > compatible = "arm,cortex-a53", "arm,armv8"; > reg = <0 0x100>; > enable-method = "spin-table"; > - cpu-release-addr = <0 0x80000100>; > + cpu-release-addr = <0 0x59801200>; > }; > > cpu3: cpu@101 { > @@ -101,7 +101,7 @@ > compatible = "arm,cortex-a53", "arm,armv8"; > reg = <0 0x101>; > enable-method = "spin-table"; > - cpu-release-addr = <0 0x80000100>; > + cpu-release-addr = <0 0x59801200>; > }; > }; > > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] arm64: dts: uniphier: change release address of spin-table 2016-04-15 13:05 ` Mark Rutland @ 2016-04-15 13:13 ` Masahiro Yamada [not found] ` <CAK7LNARNUMkD79h-uG_EhRFr4gE2pDM8w57EddOMbt-mO0xc8A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 8+ messages in thread From: Masahiro Yamada @ 2016-04-15 13:13 UTC (permalink / raw) To: Mark Rutland Cc: arm-DgEjT+Ai2ygdnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA, Kumar Gala, Linux Kernel Mailing List, Ian Campbell, Rob Herring, Pawel Moll, Will Deacon, Catalin Marinas, linux-arm-kernel Hi Mark. 2016-04-15 22:05 GMT+09:00 Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>: > On Fri, Apr 15, 2016 at 07:30:47PM +0900, Masahiro Yamada wrote: >> The 8-byte register located at 0x59801200 on this SoC is dedicated >> for waking up secondary CPUs. We can use it and save normal memory. > > Generally, it is not safe to use MMIO registers to back spin-table. The > kernel maps the spin table location with cacheable attributes, so there > may be speculative accesses to any registes in the same (64K) page, and > a writeback may be larger than the 8-byte register width (which the > device might not accept, triggering an SError). > > Given that, I do not think this is a good idea. I did not know this. Thanks for your advice! Arnd, Olof Please drop this patch. (I think 1/2 is still OK.) -- Best Regards Masahiro Yamada -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <CAK7LNARNUMkD79h-uG_EhRFr4gE2pDM8w57EddOMbt-mO0xc8A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH 2/2] arm64: dts: uniphier: change release address of spin-table [not found] ` <CAK7LNARNUMkD79h-uG_EhRFr4gE2pDM8w57EddOMbt-mO0xc8A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2016-04-15 18:48 ` Arnd Bergmann 2016-04-16 14:47 ` Masahiro Yamada 0 siblings, 1 reply; 8+ messages in thread From: Arnd Bergmann @ 2016-04-15 18:48 UTC (permalink / raw) To: Masahiro Yamada Cc: Mark Rutland, arm-DgEjT+Ai2ygdnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA, Kumar Gala, Linux Kernel Mailing List, Ian Campbell, Rob Herring, Pawel Moll, Will Deacon, Catalin Marinas, linux-arm-kernel On Friday 15 April 2016 22:13:55 Masahiro Yamada wrote: > 2016-04-15 22:05 GMT+09:00 Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>: > > On Fri, Apr 15, 2016 at 07:30:47PM +0900, Masahiro Yamada wrote: > >> The 8-byte register located at 0x59801200 on this SoC is dedicated > >> for waking up secondary CPUs. We can use it and save normal memory. > > > > Generally, it is not safe to use MMIO registers to back spin-table. The > > kernel maps the spin table location with cacheable attributes, so there > > may be speculative accesses to any registes in the same (64K) page, and > > a writeback may be larger than the 8-byte register width (which the > > device might not accept, triggering an SError). > > > > Given that, I do not think this is a good idea. > > I did not know this. Thanks for your advice! > > > Arnd, Olof > > Please drop this patch. > (I think 1/2 is still OK.) > Should patch 1 be applied as a bugfix for 4.6 instead? Arnd -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] arm64: dts: uniphier: change release address of spin-table 2016-04-15 18:48 ` Arnd Bergmann @ 2016-04-16 14:47 ` Masahiro Yamada 0 siblings, 0 replies; 8+ messages in thread From: Masahiro Yamada @ 2016-04-16 14:47 UTC (permalink / raw) To: Arnd Bergmann Cc: Mark Rutland, devicetree, Pawel Moll, Ian Campbell, Catalin Marinas, Will Deacon, Linux Kernel Mailing List, Rob Herring, arm, Kumar Gala, linux-arm-kernel Hi Arnd, 2016-04-16 3:48 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: > On Friday 15 April 2016 22:13:55 Masahiro Yamada wrote: >> 2016-04-15 22:05 GMT+09:00 Mark Rutland <mark.rutland@arm.com>: >> > On Fri, Apr 15, 2016 at 07:30:47PM +0900, Masahiro Yamada wrote: >> >> The 8-byte register located at 0x59801200 on this SoC is dedicated >> >> for waking up secondary CPUs. We can use it and save normal memory. >> > >> > Generally, it is not safe to use MMIO registers to back spin-table. The >> > kernel maps the spin table location with cacheable attributes, so there >> > may be speculative accesses to any registes in the same (64K) page, and >> > a writeback may be larger than the 8-byte register width (which the >> > device might not accept, triggering an SError). >> > >> > Given that, I do not think this is a good idea. >> >> I did not know this. Thanks for your advice! >> >> >> Arnd, Olof >> >> Please drop this patch. >> (I think 1/2 is still OK.) >> > > Should patch 1 be applied as a bugfix for 4.6 instead? > Yes, please! -- Best Regards Masahiro Yamada ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-04-23 20:09 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-15 10:30 [PATCH 0/2] arm64: dts: uniphier: UniPhier DT updates for Linux 4.7-rc1 Masahiro Yamada
2016-04-15 10:30 ` [PATCH 1/2] arm64: dts: uniphier: fix I2C nodes of PH1-LD20 Masahiro Yamada
2016-04-23 20:09 ` Arnd Bergmann
2016-04-15 10:30 ` [PATCH 2/2] arm64: dts: uniphier: change release address of spin-table Masahiro Yamada
[not found] ` <1460716247-28049-3-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
2016-04-15 13:05 ` Mark Rutland
2016-04-15 13:13 ` Masahiro Yamada
[not found] ` <CAK7LNARNUMkD79h-uG_EhRFr4gE2pDM8w57EddOMbt-mO0xc8A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-04-15 18:48 ` Arnd Bergmann
2016-04-16 14:47 ` Masahiro Yamada
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).