From: "Heiko Stübner" <heiko@sntech.de>
To: Damon Ding <damon.ding@rock-chips.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
rfoss@kernel.org, vkoul@kernel.org,
sebastian.reichel@collabora.com,
cristian.ciocaltea@collabora.com, l.stach@pengutronix.de,
andy.yan@rock-chips.com, hjc@rock-chips.com,
algea.cao@rock-chips.com, kever.yang@rock-chips.com,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-phy@lists.infradead.org
Subject: Re: [PATCH v2 03/11] drm/rockchip: analogix_dp: Add support for RK3588
Date: Mon, 16 Dec 2024 10:11:54 +0100 [thread overview]
Message-ID: <4395748.ejJDZkT8p0@diego> (raw)
In-Reply-To: <gwogudb5vae7wu452zwuqmdlyaibenoso4f5pjmu3uttckhy2w@shndol4mz5n4>
Am Montag, 16. Dezember 2024, 09:57:41 CET schrieb Dmitry Baryshkov:
> On Mon, Dec 16, 2024 at 11:12:17AM +0800, Damon Ding wrote:
> > RK3588 integrates the analogix eDP 1.3 TX controller IP and the HDMI/eDP
> > TX Combo PHY based on a Samsung IP block, and there are also two
> > independent eDP display interface on RK3588 Soc.
> >
> > Add just the basic support for now, i.e. RGB output up to 4K@60Hz, without
> > the tests of audio, PSR and other eDP 1.3 specific features.
> >
> > Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
> >
> > ---
> >
> > Changes in v2:
> > - Add support for the other eDP output edp1
> > ---
> > .../gpu/drm/rockchip/analogix_dp-rockchip.c | 82 ++++++++++++++++---
> > include/drm/bridge/analogix_dp.h | 3 +-
> > 2 files changed, 74 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> > index 871606a31ef1..4c9a55776ada 100644
> > --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> > +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> > @@ -51,10 +51,12 @@ struct rockchip_grf_reg_field {
> > /**
> > * struct rockchip_dp_chip_data - splite the grf setting of kind of chips
> > * @lcdc_sel: grf register field of lcdc_sel
> > + * @edp_mode: grf register field of edp_mode
> > * @chip_type: specific chip type
> > */
> > struct rockchip_dp_chip_data {
> > const struct rockchip_grf_reg_field lcdc_sel;
> > + const struct rockchip_grf_reg_field edp_mode;
> > u32 chip_type;
> > };
> >
> > @@ -134,12 +136,21 @@ static int rockchip_dp_poweron(struct analogix_dp_plat_data *plat_data)
> > return ret;
> > }
> >
> > + ret = rockchip_grf_field_write(dp->grf, &dp->data->edp_mode, 1);
> > + if (ret != 0)
> > + DRM_DEV_ERROR(dp->dev, "failed to set edp mode %d\n", ret);
>
> Is it to be called for non-eDP hosts too? Or for older hosts?
The implementation of rockchip_grf_field_write (in patch1) seems to
take care of checking if that field actually exists and doing nothing if
not.
I think eDP/DP is more a naming thing, the Analogix controller is called
an eDP controller in all documentation things.
Even back on rk3288, the Analogix-DP, still is called an eDP controller in
documentation, with the only difference being that it does not contain
another additional "dedicated" DP controller
> > @@ -396,6 +425,7 @@ static int rockchip_dp_probe(struct platform_device *pdev)
> > const struct rockchip_dp_chip_data *dp_data;
> > struct drm_panel *panel = NULL;
> > struct rockchip_dp_device *dp;
> > + int id, i;
> > int ret;
> >
> > dp_data = of_device_get_match_data(dev);
> > @@ -410,9 +440,22 @@ static int rockchip_dp_probe(struct platform_device *pdev)
> > if (!dp)
> > return -ENOMEM;
> >
> > + id = of_alias_get_id(dev->of_node, "edp");
> > + if (id < 0)
> > + id = 0;
>
> Alias is not documented.
additionally, aliases should never be used to determine actual device
functionionality - e.g. the hw-device-number
> Please check how other platforms handle device -> ID conversion and
> consider following it (yes, the best option currently known is to
> hardcode bus addresses into the driver data).
see for example the dw-dsi + dw-dsi2 for existing implementations.
> > + i = 0;
> > + while (is_rockchip(dp_data[i].chip_type))
> > + i++;
> > +
> > + if (id >= i) {
> > + DRM_DEV_ERROR(dev, "invalid edp id: %d\n", id);
> > + return -ENODEV;
> > + }
>
> Is it applicable to non-eDP case?
same as above, it's always called eDP in all pieces of documentation,
(Compliant with DP 1.2 and eDP 1.3)
Heiko
> > +
> > dp->dev = dev;
> > dp->adp = ERR_PTR(-ENODEV);
> > - dp->data = dp_data;
> > + dp->data = &dp_data[id];
> > dp->plat_data.panel = panel;
> > dp->plat_data.dev_type = dp->data->chip_type;
> > dp->plat_data.power_on = rockchip_dp_poweron;
> > @@ -464,19 +507,38 @@ static int rockchip_dp_resume(struct device *dev)
> > static DEFINE_RUNTIME_DEV_PM_OPS(rockchip_dp_pm_ops, rockchip_dp_suspend,
> > rockchip_dp_resume, NULL);
> >
> > -static const struct rockchip_dp_chip_data rk3399_edp = {
> > - .lcdc_sel = GRF_REG_FIELD(0x6250, 5, 5),
> > - .chip_type = RK3399_EDP,
> > +static const struct rockchip_dp_chip_data rk3399_edp[] = {
> > + {
> > + .lcdc_sel = GRF_REG_FIELD(0x6250, 5, 5),
> > + .chip_type = RK3399_EDP,
> > + },
> > + { /* sentinel */ }
> > +};
> > +
> > +static const struct rockchip_dp_chip_data rk3288_dp[] = {
> > + {
> > + .lcdc_sel = GRF_REG_FIELD(0x025c, 5, 5),
> > + .chip_type = RK3288_DP,
> > + },
> > + { /* sentinel */ }
> > };
> >
> > -static const struct rockchip_dp_chip_data rk3288_dp = {
> > - .lcdc_sel = GRF_REG_FIELD(0x025c, 5, 5),
> > - .chip_type = RK3288_DP,
> > +static const struct rockchip_dp_chip_data rk3588_edp[] = {
> > + {
> > + .edp_mode = GRF_REG_FIELD(0x0000, 0, 0),
> > + .chip_type = RK3588_EDP,
> > + },
> > + {
> > + .edp_mode = GRF_REG_FIELD(0x0004, 0, 0),
> > + .chip_type = RK3588_EDP,
> > + },
> > + { /* sentinel */ }
> > };
> >
> > static const struct of_device_id rockchip_dp_dt_ids[] = {
> > {.compatible = "rockchip,rk3288-dp", .data = &rk3288_dp },
> > {.compatible = "rockchip,rk3399-edp", .data = &rk3399_edp },
> > + {.compatible = "rockchip,rk3588-edp", .data = &rk3588_edp },
> > {}
> > };
> > MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
> > diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
> > index 6002c5666031..54086cb2d97d 100644
> > --- a/include/drm/bridge/analogix_dp.h
> > +++ b/include/drm/bridge/analogix_dp.h
> > @@ -15,11 +15,12 @@ enum analogix_dp_devtype {
> > EXYNOS_DP,
> > RK3288_DP,
> > RK3399_EDP,
> > + RK3588_EDP,
> > };
> >
> > static inline bool is_rockchip(enum analogix_dp_devtype type)
> > {
> > - return type == RK3288_DP || type == RK3399_EDP;
> > + return type == RK3288_DP || type == RK3399_EDP || type == RK3588_EDP;
> > }
> >
> > struct analogix_dp_plat_data {
>
>
next prev parent reply other threads:[~2024-12-16 9:12 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-16 3:12 [PATCH v2 00/11] Add eDP support for RK3588 Damon Ding
2024-12-16 3:12 ` [PATCH v2 01/11] drm/rockchip: analogix_dp: Use formalized struct definition for grf field Damon Ding
2024-12-16 3:12 ` [PATCH v2 02/11] dt-bindings: display: rockchip: analogix-dp: Add support for RK3588 Damon Ding
2024-12-16 3:12 ` [PATCH v2 03/11] drm/rockchip: analogix_dp: " Damon Ding
2024-12-16 8:57 ` Dmitry Baryshkov
2024-12-16 9:11 ` Heiko Stübner [this message]
2024-12-16 10:04 ` Dmitry Baryshkov
2024-12-16 10:09 ` Damon Ding
2024-12-16 3:12 ` [PATCH v2 04/11] phy: phy-rockchip-samsung-hdptx: Add support for eDP mode Damon Ding
2024-12-16 9:00 ` Dmitry Baryshkov
2024-12-16 10:06 ` Damon Ding
2024-12-18 12:35 ` Heiko Stübner
2024-12-19 1:35 ` Damon Ding
2024-12-16 3:12 ` [PATCH v2 05/11] drm/bridge: analogix_dp: add support for RK3588 Damon Ding
2024-12-16 3:12 ` [PATCH v2 06/11] drm/bridge: analogix_dp: Add support for phy configuration Damon Ding
2024-12-16 3:12 ` [PATCH v2 07/11] dt-bindings: display: rockchip: Fix label name of hdptxphy for RK3588 HDMI TX Controller Damon Ding
2024-12-16 3:12 ` [PATCH v2 08/11] arm64: dts: rockchip: Fix label name of hdptxphy for RK3588 Damon Ding
2024-12-16 3:12 ` [PATCH v2 09/11] arm64: dts: rockchip: Add eDP0 node " Damon Ding
2024-12-16 3:12 ` [PATCH v2 10/11] arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board Damon Ding
2024-12-16 9:06 ` Dmitry Baryshkov
2024-12-16 10:15 ` Damon Ding
2024-12-16 3:12 ` [PATCH v2 11/11] arm64: dts: rockchip: Add nodes related to eDP1 for RK3588 Damon Ding
2024-12-18 12:45 ` Heiko Stübner
2024-12-19 1:27 ` Damon Ding
2024-12-16 16:29 ` [PATCH v2 00/11] Add eDP support " Rob Herring (Arm)
2024-12-17 2:32 ` Damon Ding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4395748.ejJDZkT8p0@diego \
--to=heiko@sntech.de \
--cc=algea.cao@rock-chips.com \
--cc=andy.yan@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=cristian.ciocaltea@collabora.com \
--cc=damon.ding@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hjc@rock-chips.com \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).