Re: [PATCH 4/4] dt-bindings: net: adin: document 1588 TX/RX SOP bindings

["Ardelean, Alexandru" <alexandru.Ardelean@analog.com>]

On Thu, 2020-01-16 at 14:43 +0100, Andrew Lunn wrote:
> [External]
> 
> > +  adi,1588-rx-sop-delays-cycles:
> > +    allOf:
> > +      - $ref: /schemas/types.yaml#definitions/uint8-array
> > +      - items:
> > +          - minItems: 3
> > +            maxItems: 3
> > +    description: |
> > +      Enables Start Packet detection (SOP) for received IEEE 1588 time
> > stamp
> > +      controls, and configures the number of cycles (of the MII RX_CLK
> > clock)
> > +      to delay the indication of RX SOP frames for 10/100/1000 BASE-T
> > links.
> > +      The first element (in the array) configures the delay for
> > 10BASE-T,
> > +      the second for 100BASE-T, and the third for 1000BASE-T.
> 
> Do you know the clock frequency? It would be much better to express
> this in ns, as with adi,1588-tx-sop-delays-ns.

Yep.
We know the clock frequency here.
I'll take a look about converting this.

> 
> > @@ -62,5 +116,11 @@ examples:
> >              reg = <1>;
> >  
> >              adi,fifo-depth-bits = <16>;
> > +
> > +            adi,1588-rx-sop-delays-cycles = [ 00 00 00 ];
> > +            adi,1588-rx-sop-pin-name = "int_n";
> > +
> > +            adi,1588-tx-sop-delays-ns = [ 00 08 10 ];
> 
> 10 is not a multiple of 8!

My bad here.
I should point-out somewhere that these are hex-values.
It's kind of implied via the DT uint8 array type.

> 
>    Andrew