From: "Rafał Miłecki" <zajec5@gmail.com>
To: Rob Herring <robh@kernel.org>,
linux-pci@vger.kernel.org,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Srinath Mannam <srinath.mannam@broadcom.com>,
Roman Bacik <roman.bacik@broadcom.com>,
Bharat Gooty <bharat.gooty@broadcom.com>,
Abhishek Shah <abhishek.shah@broadcom.com>,
Jitendra Bhivare <jitendra.bhivare@broadcom.com>,
Ray Jui <ray.jui@broadcom.com>,
Florian Fainelli <f.fainelli@gmail.com>,
BCM Kernel Feedback <bcm-kernel-feedback-list@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: PCI DT regressions affecting Northstar (iproc driver)
Date: Tue, 3 Aug 2021 21:45:32 +0200 [thread overview]
Message-ID: <440bd70a-81c4-357d-9fb5-1f45fca17148@gmail.com> (raw)
Hi,
I normally stick to LTS kernel releases and I just late-found 2
regressions while switching from 5.4 to the 5.10.
The whole thing is about Broadcom's Northstar platform and a bit quirky
iproc PCI driver (precisely: pcie-iproc-bcma part). The iproc PCI driver
supports both: platform device (based on DT) and bcma device.
Northstar support uses a mix of DT and bcma. The later is a bus with
EEPROM containing platform devices info. Its history is decades old and
that design comes from pre-DT times. In any case:
1. Northstar PCI controllers are bcma devices with minimalistic DT nodes
2. Everything worked great with 5.4 and quite OK with 5.8
Reference:
* arch/arm/boot/dts/bcm5301x.dtsi
* drivers/pci/controller/pcie-iproc-bcma.c
Could you look at those problems and check if it's possible to fix them
in some easy way (without a big refactoring) please?
**********
The first regression results in "no space for" and "failed to assign"
info-errors like:
[ 1.353173] pci 0000:00:00.0: BAR 8: no space for [mem size 0x00c00000]
[ 1.359816] pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x00c00000]
They don't seem to cause any real harm, PCI devices are still visible.
It is caused by the:
commit 7ef1c871da16125ae58db13716fe82795dcbe3e8
Author: Rob Herring <robh@kernel.org>
Date: Mon Oct 28 11:32:38 2019 -0500
PCI: iproc: Use pci_parse_request_of_pci_ranges()
Convert the iProc host bridge to use the common
pci_parse_request_of_pci_ranges().
There's no need to assign the resources to a temporary list, so just use
bridge->windows directly.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
**********
The second regression results in "No bus range found for" errors like:
[ 1.096377] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
[ 1.103954] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
It results in not registering PCI bus at all.
Forwardtrace for that error:
iproc_pcie_bcma_probe()
devm_pci_alloc_host_bridge()
devm_of_pci_bridge_init()
pci_parse_request_of_pci_ranges()
devm_of_pci_get_host_bridge_resources()
of_pci_range_parser_init()
parser_init()
return -ENOENT;
It is caused by the :
commit 669cbc708122fc7a02282058a09f096200cee090
Author: Rob Herring <robh@kernel.org>
Date: Tue Jul 21 20:25:13 2020 -0600
PCI: Move DT resource setup into devm_pci_alloc_host_bridge()
Now that pci_parse_request_of_pci_ranges() callers just setup
pci_host_bridge.windows and dma_ranges directly and don't need the bus
range returned, we can just initialize them when allocating the
pci_host_bridge struct.
With this, pci_parse_request_of_pci_ranges() becomes a static function.
Link: https://lore.kernel.org/r/20200722022514.1283916-19-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
**********
7ef1c871da16~1
[ 1.160172] pcie_iproc_bcma bcma0:7: link: UP
[ 1.164661] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
[ 1.170978] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
[ 1.177873] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.185835] pci 0000:00:00.0: [14e4:d612] type 01 class 0x060400
[ 1.191878] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 1.201562] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 1.211257] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
[ 1.221023] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
[ 1.230796] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 1.240592] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.246702] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4c may corrupt adjacent RW1C bits
[ 1.257090] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 1.266871] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 1.276557] pci_bus 0000:00: 1-byte config write to 0000:00:00.0 offset 0xc may corrupt adjacent RW1C bits
[ 1.286238] PCI: bus0: Fast back to back transfers disabled
[ 1.291828] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.299848] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 1.309740] pci 0000:01:00.0: [14e4:4365] type 00 class 0x028000
[ 1.315818] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1.322633] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
[ 1.329441] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
[ 1.336773] pci 0000:01:00.0: supports D1 D2
[ 1.341625] PCI: bus1: Fast back to back transfers disabled
[ 1.347223] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.353870] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 1.360532] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x08bfffff]
[ 1.367341] pci 0000:00:00.0: BAR 9: assigned [mem 0x08c00000-0x08cfffff 64bit pref]
[ 1.375118] pci 0000:01:00.0: BAR 2: assigned [mem 0x08000000-0x087fffff 64bit]
[ 1.382459] pci 0000:01:00.0: BAR 4: assigned [mem 0x08c00000-0x08cfffff 64bit pref]
[ 1.390237] pci 0000:01:00.0: BAR 0: assigned [mem 0x08800000-0x08807fff 64bit]
[ 1.397566] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.402545] pci 0000:00:00.0: bridge window [mem 0x08000000-0x08bfffff]
[ 1.409343] pci 0000:00:00.0: bridge window [mem 0x08c00000-0x08cfffff 64bit pref]
[ 1.540170] pcie_iproc_bcma bcma0:8: link: UP
[ 1.544652] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
[ 1.550967] pci_bus 0001:00: root bus resource [mem 0x20000000-0x27ffffff]
[ 1.557861] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.565826] pci 0001:00:00.0: [14e4:d612] type 01 class 0x060400
[ 1.571915] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.578596] PCI: bus0: Fast back to back transfers disabled
[ 1.584208] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.592378] pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000
[ 1.598442] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1.605276] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
[ 1.612092] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
[ 1.619420] pci 0001:01:00.0: supports D1 D2
[ 1.624263] PCI: bus1: Fast back to back transfers disabled
[ 1.629861] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.636525] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
[ 1.643175] pci 0001:00:00.0: BAR 8: assigned [mem 0x20000000-0x20bfffff]
[ 1.649978] pci 0001:00:00.0: BAR 9: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
[ 1.657753] pci 0001:01:00.0: BAR 2: assigned [mem 0x20000000-0x207fffff 64bit]
[ 1.665092] pci 0001:01:00.0: BAR 4: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
[ 1.672865] pci 0001:01:00.0: BAR 0: assigned [mem 0x20800000-0x20807fff 64bit]
[ 1.680200] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 1.685175] pci 0001:00:00.0: bridge window [mem 0x20000000-0x20bfffff]
[ 1.691987] pci 0001:00:00.0: bridge window [mem 0x20c00000-0x20cfffff 64bit pref]
[ 1.820168] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
[ 1.826370] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
[ 1.832308] pcie_iproc_bcma bcma0:9: PCIe controller setup failed
7ef1c871da16
[ 1.159737] pcie_iproc_bcma bcma0:7: link: UP
[ 1.164214] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
[ 1.170517] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.178474] pci 0000:00:00.0: [14e4:d612] type 01 class 0x060400
[ 1.184517] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 1.194207] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 1.203900] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
[ 1.213667] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
[ 1.223440] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 1.233236] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.239347] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4c may corrupt adjacent RW1C bits
[ 1.249724] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 1.259512] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 1.269202] pci_bus 0000:00: 1-byte config write to 0000:00:00.0 offset 0xc may corrupt adjacent RW1C bits
[ 1.278882] PCI: bus0: Fast back to back transfers disabled
[ 1.284473] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.292498] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 1.302387] pci 0000:01:00.0: [14e4:4365] type 00 class 0x028000
[ 1.308449] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1.315276] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
[ 1.322091] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
[ 1.329420] pci 0000:01:00.0: supports D1 D2
[ 1.334283] PCI: bus1: Fast back to back transfers disabled
[ 1.339889] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.346523] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 1.353173] pci 0000:00:00.0: BAR 8: no space for [mem size 0x00c00000]
[ 1.359816] pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x00c00000]
[ 1.366790] pci 0000:00:00.0: BAR 9: no space for [mem size 0x00100000 64bit pref]
[ 1.374386] pci 0000:00:00.0: BAR 9: failed to assign [mem size 0x00100000 64bit pref]
[ 1.382325] pci 0000:01:00.0: BAR 2: no space for [mem size 0x00800000 64bit]
[ 1.389470] pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00800000 64bit]
[ 1.396971] pci 0000:01:00.0: BAR 4: no space for [mem size 0x00100000 64bit pref]
[ 1.404559] pci 0000:01:00.0: BAR 4: failed to assign [mem size 0x00100000 64bit pref]
[ 1.412497] pci 0000:01:00.0: BAR 0: no space for [mem size 0x00008000 64bit]
[ 1.419646] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00008000 64bit]
[ 1.427146] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.549735] pcie_iproc_bcma bcma0:8: link: UP
[ 1.554214] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
[ 1.560519] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.568474] pci 0001:00:00.0: [14e4:d612] type 01 class 0x060400
[ 1.574563] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.581269] PCI: bus0: Fast back to back transfers disabled
[ 1.586865] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.595034] pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000
[ 1.601111] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1.607925] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
[ 1.614747] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
[ 1.622081] pci 0001:01:00.0: supports D1 D2
[ 1.626921] PCI: bus1: Fast back to back transfers disabled
[ 1.632533] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.639170] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
[ 1.645828] pci 0001:00:00.0: BAR 8: no space for [mem size 0x00c00000]
[ 1.652462] pci 0001:00:00.0: BAR 8: failed to assign [mem size 0x00c00000]
[ 1.659435] pci 0001:00:00.0: BAR 9: no space for [mem size 0x00100000 64bit pref]
[ 1.667030] pci 0001:00:00.0: BAR 9: failed to assign [mem size 0x00100000 64bit pref]
[ 1.674970] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00800000 64bit]
[ 1.682122] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00800000 64bit]
[ 1.689620] pci 0001:01:00.0: BAR 4: no space for [mem size 0x00100000 64bit pref]
[ 1.697206] pci 0001:01:00.0: BAR 4: failed to assign [mem size 0x00100000 64bit pref]
[ 1.705143] pci 0001:01:00.0: BAR 0: no space for [mem size 0x00008000 64bit]
[ 1.712305] pci 0001:01:00.0: BAR 0: failed to assign [mem size 0x00008000 64bit]
[ 1.719813] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 1.849735] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
[ 1.855938] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
[ 1.861884] pcie_iproc_bcma bcma0:9: PCIe controller setup failed
669cbc708122~1
[ 1.208125] pcie_iproc_bcma bcma0:7: link: UP
[ 1.212626] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
[ 1.218951] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.226912] pci 0000:00:00.0: [14e4:d612] type 01 class 0x060400
[ 1.232962] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 1.242662] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 1.252360] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
[ 1.262136] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
[ 1.271918] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 1.281724] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.287837] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4c may corrupt adjacent RW1C bits
[ 1.298272] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 1.308040] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 1.317743] pci_bus 0000:00: 1-byte config write to 0000:00:00.0 offset 0xc may corrupt adjacent RW1C bits
[ 1.327435] PCI: bus0: Fast back to back transfers disabled
[ 1.333033] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.341064] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 1.350969] pci 0000:01:00.0: [14e4:4365] type 00 class 0x028000
[ 1.357038] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1.363872] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
[ 1.370703] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
[ 1.378031] pci 0000:01:00.0: supports D1 D2
[ 1.408606] PCI: bus1: Fast back to back transfers disabled
[ 1.414208] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.420891] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 1.427540] pci 0000:00:00.0: BAR 8: no space for [mem size 0x00c00000]
[ 1.434188] pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x00c00000]
[ 1.441180] pci 0000:00:00.0: BAR 9: no space for [mem size 0x00100000 64bit pref]
[ 1.448774] pci 0000:00:00.0: BAR 9: failed to assign [mem size 0x00100000 64bit pref]
[ 1.456713] pci 0000:01:00.0: BAR 2: no space for [mem size 0x00800000 64bit]
[ 1.463877] pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00800000 64bit]
[ 1.471386] pci 0000:01:00.0: BAR 4: no space for [mem size 0x00100000 64bit pref]
[ 1.478984] pci 0000:01:00.0: BAR 4: failed to assign [mem size 0x00100000 64bit pref]
[ 1.486921] pci 0000:01:00.0: BAR 0: no space for [mem size 0x00008000 64bit]
[ 1.494075] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00008000 64bit]
[ 1.501581] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.618123] pcie_iproc_bcma bcma0:8: link: UP
[ 1.622607] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
[ 1.628926] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.636887] pci 0001:00:00.0: [14e4:d612] type 01 class 0x060400
[ 1.642985] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.649708] PCI: bus0: Fast back to back transfers disabled
[ 1.655304] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.663478] pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000
[ 1.669567] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1.676382] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
[ 1.683215] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
[ 1.690560] pci 0001:01:00.0: supports D1 D2
[ 1.718605] PCI: bus1: Fast back to back transfers disabled
[ 1.724202] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.730884] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
[ 1.737533] pci 0001:00:00.0: BAR 8: no space for [mem size 0x00c00000]
[ 1.744178] pci 0001:00:00.0: BAR 8: failed to assign [mem size 0x00c00000]
[ 1.751172] pci 0001:00:00.0: BAR 9: no space for [mem size 0x00100000 64bit pref]
[ 1.758767] pci 0001:00:00.0: BAR 9: failed to assign [mem size 0x00100000 64bit pref]
[ 1.766708] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00800000 64bit]
[ 1.773869] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00800000 64bit]
[ 1.781378] pci 0001:01:00.0: BAR 4: no space for [mem size 0x00100000 64bit pref]
[ 1.788985] pci 0001:01:00.0: BAR 4: failed to assign [mem size 0x00100000 64bit pref]
[ 1.796923] pci 0001:01:00.0: BAR 0: no space for [mem size 0x00008000 64bit]
[ 1.804082] pci 0001:01:00.0: BAR 0: failed to assign [mem size 0x00008000 64bit]
[ 1.811593] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 1.928122] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
[ 1.934324] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
[ 1.940271] pcie_iproc_bcma bcma0:9: PCIe controller setup failed
669cbc708122
[ 1.096377] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
[ 1.103954] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
[ 1.113593] pcie_iproc_bcma: probe of bcma0:7 failed with error -12
[ 1.120019] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges:
[ 1.127538] pcie_iproc_bcma bcma0:8: No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff]
[ 1.137172] pcie_iproc_bcma: probe of bcma0:8 failed with error -12
[ 1.258092] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
[ 1.264296] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
[ 1.270250] pcie_iproc_bcma bcma0:9: PCIe controller setup failed
next reply other threads:[~2021-08-03 19:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-03 19:45 Rafał Miłecki [this message]
2021-08-03 22:00 ` PCI DT regressions affecting Northstar (iproc driver) Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=440bd70a-81c4-357d-9fb5-1f45fca17148@gmail.com \
--to=zajec5@gmail.com \
--cc=abhishek.shah@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bharat.gooty@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=jitendra.bhivare@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=ray.jui@broadcom.com \
--cc=robh@kernel.org \
--cc=roman.bacik@broadcom.com \
--cc=sbranden@broadcom.com \
--cc=srinath.mannam@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).