[PATCH 0/4] arm64: dts: qcom: qdu1000: add SDHCI

[PATCH 0/4] arm64: dts: qcom: qdu1000: add SDHCI

[Komal Bajaj]

Add sdhc instance for supporting eMMC on QDU1000 and
QRU1000 SoCs.

Komal Bajaj (4):
  dt-bindings: mmc: sdhci-msm: Document the QDU1000/QRU1000 compatible
  arm: dts: qcom: qdu1000: Add SDHCI node
  arm64: dts: qcom: qdu1000: Add SDHCI1 pin configuration to DTSI
  arm64: dts: qcom: qdu1000-idp: add SDHCI for emmc

 .../devicetree/bindings/mmc/sdhci-msm.yaml    |   1 +
 arch/arm64/boot/dts/qcom/qdu1000-idp.dts      |  11 ++
 arch/arm64/boot/dts/qcom/qdu1000.dtsi         | 110 ++++++++++++++++++
 3 files changed, 122 insertions(+)

--
2.17.1

[PATCH 1/4] dt-bindings: mmc: sdhci-msm: Document the QDU1000/QRU1000 compatible

[Komal Bajaj]

Document the compatible for SDHCI on QDU1000 and QRU1000 SoCs.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
---
 Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index 4f2d9e8127dd..f51a38b12d6f 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -55,6 +55,7 @@ properties:
               - qcom,sm8350-sdhci
               - qcom,sm8450-sdhci
               - qcom,sm8550-sdhci
+              - qcom,qdu1000-sdhci
           - const: qcom,sdhci-msm-v5 # for sdcc version 5.0

   reg:
--
2.17.1

Re: [PATCH 1/4] dt-bindings: mmc: sdhci-msm: Document the QDU1000/QRU1000 compatible

[Bhupesh Sharma]

On 5/19/23 2:21 PM, Komal Bajaj wrote:
> Document the compatible for SDHCI on QDU1000 and QRU1000 SoCs.
> 
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
>   Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> index 4f2d9e8127dd..f51a38b12d6f 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> @@ -55,6 +55,7 @@ properties:
>                 - qcom,sm8350-sdhci
>                 - qcom,sm8450-sdhci
>                 - qcom,sm8550-sdhci
> +              - qcom,qdu1000-sdhci

Please add new entries in alphabetical order.

Thanks,
Bhupesh

>             - const: qcom,sdhci-msm-v5 # for sdcc version 5.0
> 
>     reg:
> --
> 2.17.1
> 

Re: [PATCH 1/4] dt-bindings: mmc: sdhci-msm: Document the QDU1000/QRU1000 compatible

[Komal Bajaj]

On 5/19/2023 3:37 PM, Bhupesh Sharma wrote:
>
> On 5/19/23 2:21 PM, Komal Bajaj wrote:
>> Document the compatible for SDHCI on QDU1000 and QRU1000 SoCs.
>>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
>>   Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml 
>> b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
>> index 4f2d9e8127dd..f51a38b12d6f 100644
>> --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
>> +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
>> @@ -55,6 +55,7 @@ properties:
>>                 - qcom,sm8350-sdhci
>>                 - qcom,sm8450-sdhci
>>                 - qcom,sm8550-sdhci
>> +              - qcom,qdu1000-sdhci
>
> Please add new entries in alphabetical order.
Noted.
>
> Thanks,
> Bhupesh
>
>>             - const: qcom,sdhci-msm-v5 # for sdcc version 5.0
>>
>>     reg:
>> -- 
>> 2.17.1
>>

Re: [PATCH 1/4] dt-bindings: mmc: sdhci-msm: Document the QDU1000/QRU1000 compatible

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 1004 bytes --]

On Fri, May 19, 2023 at 03:37:09PM +0530, Bhupesh Sharma wrote:
> 
> On 5/19/23 2:21 PM, Komal Bajaj wrote:
> > Document the compatible for SDHCI on QDU1000 and QRU1000 SoCs.
> > 
> > Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> > ---
> >   Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 1 +
> >   1 file changed, 1 insertion(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> > index 4f2d9e8127dd..f51a38b12d6f 100644
> > --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> > +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> > @@ -55,6 +55,7 @@ properties:
> >                 - qcom,sm8350-sdhci
> >                 - qcom,sm8450-sdhci
> >                 - qcom,sm8550-sdhci
> > +              - qcom,qdu1000-sdhci
> 
> Please add new entries in alphabetical order.

With this done,
Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH 2/4] arm: dts: qcom: qdu1000: Add SDHCI node

[Komal Bajaj]

Add sdhc node for eMMC on QDU1000 and QRU1000 SoCs.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 60 +++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 734438113bba..6113def66a08 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -19,6 +19,10 @@

 	chosen: chosen { };

+	aliases {
+		mmc0 = &sdhc_1; /*SDC1 eMMC slot*/
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -842,6 +846,62 @@
 			#hwlock-cells = <1>;
 		};

+		sdhc_1: mmc@8804000 {
+			compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x08804000 0x0 0x1000>,
+			      <0x0 0x08805000 0x0 0x1000>;
+
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC5_AHB_CLK>,
+				 <&gcc GCC_SDCC5_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+
+			/* Add dt entry for gcc hw reset */
+			resets = <&gcc GCC_SDCC5_BCR>;
+
+			interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			power-domains = <&rpmhpd QDU1000_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			iommus = <&apps_smmu 0x0080 0x0>;
+			dma-coherent;
+
+			bus-width = <8>;
+			non-removable;
+			supports-cqe;
+
+			no-sd;
+			no-sdio;
+
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+			cap-mmc-hw-reset;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
--
2.17.1

Re: [PATCH 2/4] arm: dts: qcom: qdu1000: Add SDHCI node

[Bhupesh Sharma]

Hi Komal,

On 5/19/23 2:21 PM, Komal Bajaj wrote:
> Add sdhc node for eMMC on QDU1000 and QRU1000 SoCs.
> 
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/qdu1000.dtsi | 60 +++++++++++++++++++++++++++
>   1 file changed, 60 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index 734438113bba..6113def66a08 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -19,6 +19,10 @@
> 
>   	chosen: chosen { };
> 
> +	aliases {
> +		mmc0 = &sdhc_1; /*SDC1 eMMC slot*/

Please use the right comment formats /* text */
Also, just /* eMMC */ would be fine here.

> +	};
> +
>   	cpus {
>   		#address-cells = <2>;
>   		#size-cells = <0>;
> @@ -842,6 +846,62 @@
>   			#hwlock-cells = <1>;
>   		};
> 
> +		sdhc_1: mmc@8804000 {
> +			compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0x0 0x08804000 0x0 0x1000>,
> +			      <0x0 0x08805000 0x0 0x1000>;
> +
> +			reg-names = "hc", "cqhci";
> +
> +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC5_AHB_CLK>,
> +				 <&gcc GCC_SDCC5_APPS_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>;
> +			clock-names = "iface", "core", "xo";
> +
> +			/* Add dt entry for gcc hw reset */

Please drop the comment above - it's not needed.

> +			resets = <&gcc GCC_SDCC5_BCR>;
> +
> +			interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>;
> +			interconnect-names = "sdhc-ddr", "cpu-sdhc";
> +			power-domains = <&rpmhpd QDU1000_CX>;
> +			operating-points-v2 = <&sdhc1_opp_table>;
> +
> +			iommus = <&apps_smmu 0x0080 0x0>;
> +			dma-coherent;
> +
> +			bus-width = <8>;
> +			non-removable;
> +			supports-cqe;
> +
> +			no-sd;
> +			no-sd;

Can we club the following 3 together:
non-removable;
no-sd;
no-sd;

And normally these is a part of board file (.dts), right?

Thanks,
Bhupesh

> +			mmc-ddr-1_8v;
> +			mmc-hs200-1_8v;
> +			mmc-hs400-1_8v;
> +			mmc-hs400-enhanced-strobe;
> +			cap-mmc-hw-reset;
> +
> +			qcom,dll-config = <0x0007642c>;
> +			qcom,ddr-config = <0x80040868>;
> +
> +			status = "disabled";
> +
> +			sdhc1_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-384000000 {
> +					opp-hz = /bits/ 64 <384000000>;
> +					required-opps = <&rpmhpd_opp_min_svs>;
> +				};
> +			};
> +		};
> +
>   		pdc: interrupt-controller@b220000 {
>   			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
>   			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
> --
> 2.17.1
> 

Re: [PATCH 2/4] arm: dts: qcom: qdu1000: Add SDHCI node

[Komal Bajaj]

On 5/19/2023 3:35 PM, Bhupesh Sharma wrote:
> Hi Komal,
>
> On 5/19/23 2:21 PM, Komal Bajaj wrote:
>> Add sdhc node for eMMC on QDU1000 and QRU1000 SoCs.
>>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/qdu1000.dtsi | 60 +++++++++++++++++++++++++++
>>   1 file changed, 60 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi 
>> b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> index 734438113bba..6113def66a08 100644
>> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> @@ -19,6 +19,10 @@
>>
>>       chosen: chosen { };
>>
>> +    aliases {
>> +        mmc0 = &sdhc_1; /*SDC1 eMMC slot*/
>
> Please use the right comment formats /* text */
> Also, just /* eMMC */ would be fine here.
Sure, will keep just /* eMMC */ in comments.
>
>> +    };
>> +
>>       cpus {
>>           #address-cells = <2>;
>>           #size-cells = <0>;
>> @@ -842,6 +846,62 @@
>>               #hwlock-cells = <1>;
>>           };
>>
>> +        sdhc_1: mmc@8804000 {
>> +            compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
>> +            reg = <0x0 0x08804000 0x0 0x1000>,
>> +                  <0x0 0x08805000 0x0 0x1000>;
>> +
>> +            reg-names = "hc", "cqhci";
>> +
>> +            interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
>> +                     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
>> +            interrupt-names = "hc_irq", "pwr_irq";
>> +
>> +            clocks = <&gcc GCC_SDCC5_AHB_CLK>,
>> +                 <&gcc GCC_SDCC5_APPS_CLK>,
>> +                 <&rpmhcc RPMH_CXO_CLK>;
>> +            clock-names = "iface", "core", "xo";
>> +
>> +            /* Add dt entry for gcc hw reset */
>
> Please drop the comment above - it's not needed.
Noted. Will remove it in the next patch set.
>
>> +            resets = <&gcc GCC_SDCC5_BCR>;
>> +
>> +            interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt 
>> SLAVE_EBI1 0>,
>> +                    <&gem_noc MASTER_APPSS_PROC 0 &system_noc 
>> SLAVE_SDCC_2 0>;
>> +            interconnect-names = "sdhc-ddr", "cpu-sdhc";
>> +            power-domains = <&rpmhpd QDU1000_CX>;
>> +            operating-points-v2 = <&sdhc1_opp_table>;
>> +
>> +            iommus = <&apps_smmu 0x0080 0x0>;
>> +            dma-coherent;
>> +
>> +            bus-width = <8>;
>> +            non-removable;
>> +            supports-cqe;
>> +
>> +            no-sd;
>> +            no-sd;
>
> Can we club the following 3 together:
> non-removable;
> no-sd;
> no-sd;
>
> And normally these is a part of board file (.dts), right?
Sure, will move these to board file.

Thanks
Komal
>
> Thanks,
> Bhupesh
>
>> +            mmc-ddr-1_8v;
>> +            mmc-hs200-1_8v;
>> +            mmc-hs400-1_8v;
>> +            mmc-hs400-enhanced-strobe;
>> +            cap-mmc-hw-reset;
>> +
>> +            qcom,dll-config = <0x0007642c>;
>> +            qcom,ddr-config = <0x80040868>;
>> +
>> +            status = "disabled";
>> +
>> +            sdhc1_opp_table: opp-table {
>> +                compatible = "operating-points-v2";
>> +
>> +                opp-384000000 {
>> +                    opp-hz = /bits/ 64 <384000000>;
>> +                    required-opps = <&rpmhpd_opp_min_svs>;
>> +                };
>> +            };
>> +        };
>> +
>>           pdc: interrupt-controller@b220000 {
>>               compatible = "qcom,qdu1000-pdc", "qcom,pdc";
>>               reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 
>> 0x64>;
>> -- 
>> 2.17.1
>>

Re: [PATCH 2/4] arm: dts: qcom: qdu1000: Add SDHCI node

[Konrad Dybcio]

On 19.05.2023 10:51, Komal Bajaj wrote:
> Add sdhc node for eMMC on QDU1000 and QRU1000 SoCs.
> 
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 60 +++++++++++++++++++++++++++
>  1 file changed, 60 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index 734438113bba..6113def66a08 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -19,6 +19,10 @@
> 
>  	chosen: chosen { };
> 
> +	aliases {
> +		mmc0 = &sdhc_1; /*SDC1 eMMC slot*/
> +	};
> +
>  	cpus {
>  		#address-cells = <2>;
>  		#size-cells = <0>;
> @@ -842,6 +846,62 @@
>  			#hwlock-cells = <1>;
>  		};
> 
> +		sdhc_1: mmc@8804000 {
> +			compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0x0 0x08804000 0x0 0x1000>,
> +			      <0x0 0x08805000 0x0 0x1000>;
> +
confusing newline
> +			reg-names = "hc", "cqhci";
> +
> +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC5_AHB_CLK>,
> +				 <&gcc GCC_SDCC5_APPS_CLK>,
SDCC>5<?

> +				 <&rpmhcc RPMH_CXO_CLK>;
> +			clock-names = "iface", "core", "xo";
Please keep one per line

> +
> +			/* Add dt entry for gcc hw reset */
> +			resets = <&gcc GCC_SDCC5_BCR>;
5?

> +
> +			interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>;
> +			interconnect-names = "sdhc-ddr", "cpu-sdhc";
> +			power-domains = <&rpmhpd QDU1000_CX>;
> +			operating-points-v2 = <&sdhc1_opp_table>;
> +
> +			iommus = <&apps_smmu 0x0080 0x0>;
Please remove the leading zeroes from the stream id


> +			dma-coherent;
> +
> +			bus-width = <8>;


----
> +			non-removable;
> +			supports-cqe;
> +
> +			no-sd;
> +			no-sdio;
> +
> +			mmc-ddr-1_8v;
> +			mmc-hs200-1_8v;
> +			mmc-hs400-1_8v;
> +			mmc-hs400-enhanced-strobe;
> +			cap-mmc-hw-reset;
----
This bit is board-specific

> +
> +			qcom,dll-config = <0x0007642c>;
> +			qcom,ddr-config = <0x80040868>;
> +
> +			status = "disabled";
> +
> +			sdhc1_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-384000000 {
> +					opp-hz = /bits/ 64 <384000000>;
> +					required-opps = <&rpmhpd_opp_min_svs>;
You added interconnects, but not any opp-peak-kBps / opp-avg-kBps,
presumably mistakengly?

Also, 384Mhz + min_svs sounds a bit weird? Is that the correct
level for this SoC?

Konrad
> +				};
> +			};
> +		};
> +
>  		pdc: interrupt-controller@b220000 {
>  			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
>  			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
> --
> 2.17.1
> 

Re: [PATCH 2/4] arm: dts: qcom: qdu1000: Add SDHCI node

[Komal Bajaj]

On 5/20/2023 4:53 PM, Konrad Dybcio wrote:
>
> On 19.05.2023 10:51, Komal Bajaj wrote:
>> Add sdhc node for eMMC on QDU1000 and QRU1000 SoCs.
>>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/qdu1000.dtsi | 60 +++++++++++++++++++++++++++
>>   1 file changed, 60 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> index 734438113bba..6113def66a08 100644
>> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> @@ -19,6 +19,10 @@
>>
>>   	chosen: chosen { };
>>
>> +	aliases {
>> +		mmc0 = &sdhc_1; /*SDC1 eMMC slot*/
>> +	};
>> +
>>   	cpus {
>>   		#address-cells = <2>;
>>   		#size-cells = <0>;
>> @@ -842,6 +846,62 @@
>>   			#hwlock-cells = <1>;
>>   		};
>>
>> +		sdhc_1: mmc@8804000 {
>> +			compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
>> +			reg = <0x0 0x08804000 0x0 0x1000>,
>> +			      <0x0 0x08805000 0x0 0x1000>;
>> +
> confusing newline
Will remove it in the next patch set.
>> +			reg-names = "hc", "cqhci";
>> +
>> +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "hc_irq", "pwr_irq";
>> +
>> +			clocks = <&gcc GCC_SDCC5_AHB_CLK>,
>> +				 <&gcc GCC_SDCC5_APPS_CLK>,
> SDCC>5<?
These names are used in accordance with the clock hardware.
>
>> +				 <&rpmhcc RPMH_CXO_CLK>;
>> +			clock-names = "iface", "core", "xo";
> Please keep one per line
Noted.
>
>> +
>> +			/* Add dt entry for gcc hw reset */
>> +			resets = <&gcc GCC_SDCC5_BCR>;
> 5?
Reason same as above.
>
>> +
>> +			interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
>> +					<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>;
>> +			interconnect-names = "sdhc-ddr", "cpu-sdhc";
>> +			power-domains = <&rpmhpd QDU1000_CX>;
>> +			operating-points-v2 = <&sdhc1_opp_table>;
>> +
>> +			iommus = <&apps_smmu 0x0080 0x0>;
> Please remove the leading zeroes from the stream id
Sure, will do so.
>
>
>> +			dma-coherent;
>> +
>> +			bus-width = <8>;
>
> ----
>> +			non-removable;
>> +			supports-cqe;
>> +
>> +			no-sd;
>> +			no-sdio;
>> +
>> +			mmc-ddr-1_8v;
>> +			mmc-hs200-1_8v;
>> +			mmc-hs400-1_8v;
>> +			mmc-hs400-enhanced-strobe;
>> +			cap-mmc-hw-reset;
> ----
> This bit is board-specific
Okay, will move these bits to board specific file.
>
>> +
>> +			qcom,dll-config = <0x0007642c>;
>> +			qcom,ddr-config = <0x80040868>;
>> +
>> +			status = "disabled";
>> +
>> +			sdhc1_opp_table: opp-table {
>> +				compatible = "operating-points-v2";
>> +
>> +				opp-384000000 {
>> +					opp-hz = /bits/ 64 <384000000>;
>> +					required-opps = <&rpmhpd_opp_min_svs>;
> You added interconnects, but not any opp-peak-kBps / opp-avg-kBps,
> presumably mistakengly?
>
> Also, 384Mhz + min_svs sounds a bit weird? Is that the correct
> level for this SoC?
Yes, you are right, this is wrong configuration, will correct it in the 
next patch set.

Thanks
Komal
>
> Konrad
>> +				};
>> +			};
>> +		};
>> +
>>   		pdc: interrupt-controller@b220000 {
>>   			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
>>   			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>> --
>> 2.17.1
>>

[PATCH 3/4] arm64: dts: qcom: qdu1000: Add SDHCI1 pin configuration to DTSI

[Komal Bajaj]

Add required pins for SDHCI1, so that the interface can work reliably.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 50 +++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 6113def66a08..556942bfca5d 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -1160,6 +1160,56 @@
 				pins = "gpio31";
 				function = "gpio";
 			};
+
+			sdc1_on_state: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_off_state: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
 		};

 		apps_smmu: iommu@15000000 {
--
2.17.1

Re: [PATCH 3/4] arm64: dts: qcom: qdu1000: Add SDHCI1 pin configuration to DTSI

[Bhupesh Sharma]

On 5/19/23 2:21 PM, Komal Bajaj wrote:
> Add required pins for SDHCI1, so that the interface can work reliably.
> 
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/qdu1000.dtsi | 50 +++++++++++++++++++++++++++
>   1 file changed, 50 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index 6113def66a08..556942bfca5d 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -1160,6 +1160,56 @@
>   				pins = "gpio31";
>   				function = "gpio";
>   			};
> +
> +			sdc1_on_state: sdc1-on-state {
> +				clk-pins {
> +					pins = "sdc1_clk";
> +					drive-strength = <16>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc1_cmd";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc1_data";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				rclk-pins {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
> +
> +			sdc1_off_state: sdc1-off-state {
> +				clk-pins {
> +					pins = "sdc1_clk";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc1_cmd";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc1_data";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				rclk-pins {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
>   		};
> 
>   		apps_smmu: iommu@15000000 {
> --
> 2.17.1

Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>

Thanks.

[PATCH 4/4] arm64: dts: qcom: qdu1000-idp: add SDHCI for emmc

[Komal Bajaj]

Add sdhci node for emmc in qdu1000-idp.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
index 9e9fd4b8023e..b2526e991548 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
@@ -451,3 +451,14 @@
 &uart7 {
 	status = "okay";
 };
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-0 = <&sdc1_on_state>;
+	pinctrl-1 = <&sdc1_off_state>;
+	pinctrl-names = "default", "sleep";
+
+	vmmc-supply = <&vreg_l10a_2p95>;
+	vqmmc-supply = <&vreg_l7a_1p8>;
+};
--
2.17.1

Re: [PATCH 4/4] arm64: dts: qcom: qdu1000-idp: add SDHCI for emmc

[Bhupesh Sharma]

On 5/19/23 2:21 PM, Komal Bajaj wrote:
> Add sdhci node for emmc in qdu1000-idp.
> 
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> index 9e9fd4b8023e..b2526e991548 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> @@ -451,3 +451,14 @@
>   &uart7 {
>   	status = "okay";
>   };
> +
> +&sdhc_1 {
> +	status = "okay";
> +
> +	pinctrl-0 = <&sdc1_on_state>;
> +	pinctrl-1 = <&sdc1_off_state>;
> +	pinctrl-names = "default", "sleep";
> +
> +	vmmc-supply = <&vreg_l10a_2p95>;
> +	vqmmc-supply = <&vreg_l7a_1p8>;
> +};

Again, please follow alphabetical order for adding new node entries.

Also, we have been placing 'status = .. ' entry at the end for new .dts 
(or .dts entry), but if that is the format used across this board dts
I am ok with the same.

Thanks,
Bhupesh

Re: [PATCH 4/4] arm64: dts: qcom: qdu1000-idp: add SDHCI for emmc

[Konrad Dybcio]

On 19.05.2023 12:13, Bhupesh Sharma wrote:
> 
> On 5/19/23 2:21 PM, Komal Bajaj wrote:
>> Add sdhci node for emmc in qdu1000-idp.
>>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 11 +++++++++++
>>   1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> index 9e9fd4b8023e..b2526e991548 100644
>> --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> @@ -451,3 +451,14 @@
>>   &uart7 {
>>       status = "okay";
>>   };
>> +
>> +&sdhc_1 {
>> +    status = "okay";
>> +
>> +    pinctrl-0 = <&sdc1_on_state>;
>> +    pinctrl-1 = <&sdc1_off_state>;
>> +    pinctrl-names = "default", "sleep";
>> +
>> +    vmmc-supply = <&vreg_l10a_2p95>;
>> +    vqmmc-supply = <&vreg_l7a_1p8>;
>> +};
> 
> Again, please follow alphabetical order for adding new node entries.
> 
> Also, we have been placing 'status = .. ' entry at the end for new .dts (or .dts entry), but if that is the format used across this board dts
> I am ok with the same.
Komal,

since you're already touching this file, would you mind making a
separate commit moving status last for all nodes?

Konrad
> 
> Thanks,
> Bhupesh

Re: [PATCH 4/4] arm64: dts: qcom: qdu1000-idp: add SDHCI for emmc

[Komal Bajaj]

On 5/20/2023 4:54 PM, Konrad Dybcio wrote:
>
> On 19.05.2023 12:13, Bhupesh Sharma wrote:
>> On 5/19/23 2:21 PM, Komal Bajaj wrote:
>>> Add sdhci node for emmc in qdu1000-idp.
>>>
>>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>>> ---
>>>    arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 11 +++++++++++
>>>    1 file changed, 11 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>> index 9e9fd4b8023e..b2526e991548 100644
>>> --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>> @@ -451,3 +451,14 @@
>>>    &uart7 {
>>>        status = "okay";
>>>    };
>>> +
>>> +&sdhc_1 {
>>> +    status = "okay";
>>> +
>>> +    pinctrl-0 = <&sdc1_on_state>;
>>> +    pinctrl-1 = <&sdc1_off_state>;
>>> +    pinctrl-names = "default", "sleep";
>>> +
>>> +    vmmc-supply = <&vreg_l10a_2p95>;
>>> +    vqmmc-supply = <&vreg_l7a_1p8>;
>>> +};
>> Again, please follow alphabetical order for adding new node entries.
Noted.
>>
>> Also, we have been placing 'status = .. ' entry at the end for new .dts (or .dts entry), but if that is the format used across this board dts
>> I am ok with the same.
Sure, will move status to end.
> Komal,
>
> since you're already touching this file, would you mind making a
> separate commit moving status last for all nodes?
Hi Konrad,
I don't notice any other nodes whose state is maintained at the 
beginning of the node.

Thanks
Komal
>
> Konrad
>> Thanks,
>> Bhupesh