[PATCH 0/9] rockchip: rk3288-vyasa: dts fixes/additions

[PATCH 0/9] rockchip: rk3288-vyasa: dts fixes/additions

[Jagan Teki]

Series add new dts nodes like gmac, usb, io_domains and fixed existing
regulator, pmic stuff as per schematic. 

Jagan Teki (9):
  ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1
  ARM: dts: rockchip: rk3288-vyasa: Use fixed voltage range for vccio_sd
  ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC
  ARM: dts: rockchip: Add regulators for rk3288-vyasa
  ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
  ARM: dts: rockchip: Add usb host for rk3288-vyasa
  ARM: dts: rockchip: Add usb otg for rk3288-vyasa
  ARM: dts: rockchip: Add io domains for rk3288-vyasa
  ARM: multi_v7_defconfig: Statically build RTC_DRV_RK808

 arch/arm/boot/dts/rk3288-vyasa.dts     | 181 ++++++++++++++++++++++++++++++---
 arch/arm/configs/multi_v7_defconfig    |   2 +-
 include/dt-bindings/pinctrl/rockchip.h |   1 +
 3 files changed, 168 insertions(+), 16 deletions(-)

-- 
2.7.4

[PATCH 1/9] ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1

[Jagan Teki]

vdd_log, never used on DCDC_REG1 of rk808 from latest schematic so
remove the same and update the regulator-name as 'vdd_arm' to sync
with existing rk3288 board dts files.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/rk3288-vyasa.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index 3546eb8..7a0f945 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -121,8 +121,8 @@
 		vcc12-supply = <&vcc_io>;
 
 		regulators {
-			vdd_cpu: vdd_log: DCDC_REG1 {
-				regulator-name = "vdd_log";
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
-- 
2.7.4

[PATCH 2/9] ARM: dts: rockchip: rk3288-vyasa: Use fixed voltage range for vccio_sd

[Jagan Teki]

vccio_sd has supplied to vqmmc-supply for sdmmc, use fixed voltage
range of 3.3v for better IO lines supply voltage.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/rk3288-vyasa.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index 7a0f945..915b4a3 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -214,7 +214,7 @@
 
 			vccio_sd: LDO_REG5 {
 				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <1800000>;
+				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 				regulator-boot-on;
-- 
2.7.4

[PATCH 3/9] ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC

[Jagan Teki]

rk808, SWITCH_REG1 has configured for sdmmc regulator as vcc_sd,
so use the same by renaming vcc33_sd to vcc_sd(as per schematic)
and drop explicit regulator definition from root.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/rk3288-vyasa.dts | 22 ++--------------------
 1 file changed, 2 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index 915b4a3..c14ebf9 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -56,18 +56,6 @@
 		device_type = "memory";
 	};
 
-	vcc_sd: sdmmc-regulator {
-		compatible = "regulator-fixed";
-		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc_pwr>;
-		regulator-name = "vcc_sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
-	};
-
 	vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -260,8 +248,8 @@
 				};
 			};
 
-			vcc33_sd: SWITCH_REG1 {
-				regulator-name = "vcc33_sd";
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
@@ -338,10 +326,4 @@
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
-
-	sdmmc {
-		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
 };
-- 
2.7.4

[PATCH 4/9] ARM: dts: rockchip: Add regulators for rk3288-vyasa

[Jagan Teki]

Add supporting regulators for rk3288-vyasa board, dc12_vbat is
parent regulatorand followed regulators as are child regulators.
regulator naming conversion followed as per schematic for better
readability and easy for identification.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/rk3288-vyasa.dts | 40 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index c14ebf9..0fa447f 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -56,13 +56,53 @@
 		device_type = "memory";
 	};
 
+	dc12_vbat: dc12-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "dc12_vbat";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vboot_3v3: vboot-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vboot_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
 	vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	vboot_5v: vboot-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vboot_sv";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	v3g_3v3: v3g-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3g_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
 	};
 };
 
-- 
2.7.4

[PATCH 5/9] ARM: dts: rockchip: Add gmac support for rk3288-vyasa board

[Jagan Teki]

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/rk3288-vyasa.dts | 41 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index 0fa447f..c79a4c7 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -104,12 +104,35 @@
 		regulator-boot-on;
 		vin-supply = <&dc12_vbat>;
 	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
 };
 
 &cpu0 {
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu>;
 	status = "okay";
@@ -361,6 +384,24 @@
 };
 
 &pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
-- 
2.7.4

[PATCH 6/9] ARM: dts: rockchip: Add usb host for rk3288-vyasa

[Jagan Teki]

Add usb host support for rk3288-vyasa, board support hub power
through phy_pwr_en and usb2 host power through usb2_pwr_en and
naming conversion followed as per schematic.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/rk3288-vyasa.dts     | 48 ++++++++++++++++++++++++++++++++++
 include/dt-bindings/pinctrl/rockchip.h |  1 +
 2 files changed, 49 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index c79a4c7..c22d674 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -105,6 +105,30 @@
 		vin-supply = <&dc12_vbat>;
 	};
 
+	vsus_5v: vsus-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vsus_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vusb2_5v: vusb2-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vusb2_5v";
+		enable-active-high;
+		gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_pwr_en>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
 	ext_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -363,6 +387,20 @@
 	status = "okay";
 };
 
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy_pwr_en>;
+	status = "okay";
+};
+
 &vopb {
 	status = "okay";
 };
@@ -407,4 +445,14 @@
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	usb_host {
+		phy_pwr_en: phy-pwr-en {
+			rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		usb2_pwr_en: usb2-pwr-en {
+			rockchip,pins = <RK_GPIO8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
diff --git a/include/dt-bindings/pinctrl/rockchip.h b/include/dt-bindings/pinctrl/rockchip.h
index aaec8ba..dc3d661 100644
--- a/include/dt-bindings/pinctrl/rockchip.h
+++ b/include/dt-bindings/pinctrl/rockchip.h
@@ -24,6 +24,7 @@
 #define RK_GPIO3	3
 #define RK_GPIO4	4
 #define RK_GPIO6	6
+#define RK_GPIO8	8
 
 #define RK_PA0		0
 #define RK_PA1		1
-- 
2.7.4

[PATCH 7/9] ARM: dts: rockchip: Add usb otg for rk3288-vyasa

[Jagan Teki]

Add usb otg support for rk3288-vyasa, board support usb1 otg
power through otg_vbus_drv and naming conversion followed
as per schematic.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Note: g_ether/g_serial fired an issue with mainline tree 
https://paste.ubuntu.com/25752571/

 arch/arm/boot/dts/rk3288-vyasa.dts | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index c22d674..2f1389a 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -115,6 +115,20 @@
 		vin-supply = <&vcc_io>;
 	};
 
+	vusb1_5v: vusb1-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vusb1_5v";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
 	vusb2_5v: vusb2-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vusb2_5v";
@@ -401,6 +415,10 @@
 	status = "okay";
 };
 
+&usb_otg {
+	status = "okay";
+};
+
 &vopb {
 	status = "okay";
 };
@@ -455,4 +473,11 @@
 			rockchip,pins = <RK_GPIO8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+
+		};
+	};
 };
-- 
2.7.4

[PATCH 8/9] ARM: dts: rockchip: Add io domains for rk3288-vyasa

[Jagan Teki]

Add io domains supported by rk3288-vyasa board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/rk3288-vyasa.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index 2f1389a..0e0995f 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -374,6 +374,21 @@
 	};
 };
 
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcc_18>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&vcc_io>;
+	flash0-suuply = <&vcc_18>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830 = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_18>;
+};
+
 &i2c2 {
 	status = "okay";
 };
-- 
2.7.4

[PATCH 9/9] ARM: multi_v7_defconfig: Statically build RTC_DRV_RK808

[Jagan Teki]

RTC_DRV_RK808 need to have build statically for the platforms
do use MFB_RK808 so replace module with statical link.

Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
 arch/arm/configs/multi_v7_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 2adef49..6ddc35c 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -768,7 +768,7 @@ CONFIG_RTC_DRV_MAX8907=y
 CONFIG_RTC_DRV_MAX8998=m
 CONFIG_RTC_DRV_MAX8997=m
 CONFIG_RTC_DRV_MAX77686=y
-CONFIG_RTC_DRV_RK808=m
+CONFIG_RTC_DRV_RK808=y
 CONFIG_RTC_DRV_RS5C372=m
 CONFIG_RTC_DRV_BQ32K=m
 CONFIG_RTC_DRV_PALMAS=y
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 9/9] ARM: multi_v7_defconfig: Statically build RTC_DRV_RK808

[Heiko Stübner]

Hi,

Am Montag, 16. Oktober 2017, 17:46:27 CEST schrieb Jagan Teki:
> RTC_DRV_RK808 need to have build statically for the platforms
> do use MFB_RK808 so replace module with statical link.

why would you need this to be compiled on? MFD_RK808 will happily
just create the platform-devices which are then bound to the RTC
driver later once the module is ready.

Heiko

> 
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
> ---
>  arch/arm/configs/multi_v7_defconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/configs/multi_v7_defconfig
> b/arch/arm/configs/multi_v7_defconfig index 2adef49..6ddc35c 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -768,7 +768,7 @@ CONFIG_RTC_DRV_MAX8907=y
>  CONFIG_RTC_DRV_MAX8998=m
>  CONFIG_RTC_DRV_MAX8997=m
>  CONFIG_RTC_DRV_MAX77686=y
> -CONFIG_RTC_DRV_RK808=m
> +CONFIG_RTC_DRV_RK808=y
>  CONFIG_RTC_DRV_RS5C372=m
>  CONFIG_RTC_DRV_BQ32K=m
>  CONFIG_RTC_DRV_PALMAS=y


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 9/9] ARM: multi_v7_defconfig: Statically build RTC_DRV_RK808

[Jagan Teki]

On Mon, Oct 16, 2017 at 11:32 PM, Heiko Stübner <heiko@sntech.de> wrote:
> Hi,
>
> Am Montag, 16. Oktober 2017, 17:46:27 CEST schrieb Jagan Teki:
>> RTC_DRV_RK808 need to have build statically for the platforms
>> do use MFB_RK808 so replace module with statical link.
>
> why would you need this to be compiled on? MFD_RK808 will happily
> just create the platform-devices which are then bound to the RTC
> driver later once the module is ready.

Yeah, that can be true but seems like rk808 need rtc at the
beginning(like boot time) because we observed the boot hang even with
gmac (like one with HDMI [1]) eventually booting continue only when it
linked statically.

[1] https://lkml.org/lkml/2017/9/4/224

thanks!
-- 
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

Re: [PATCH 1/9] ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1

[Heiko Stuebner]

Am Montag, 16. Oktober 2017, 17:46:19 CEST schrieb Jagan Teki:
> vdd_log, never used on DCDC_REG1 of rk808 from latest schematic so
> remove the same and update the regulator-name as 'vdd_arm' to sync
> with existing rk3288 board dts files.
> 
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

applied for 4.15
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/9] ARM: dts: rockchip: rk3288-vyasa: Use fixed voltage range for vccio_sd

[Heiko Stuebner]

Hi,

Am Montag, 16. Oktober 2017, 17:46:20 CEST schrieb Jagan Teki:
> vccio_sd has supplied to vqmmc-supply for sdmmc, use fixed voltage
> range of 3.3v for better IO lines supply voltage.
> 
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

not sure I understand this one.

I.e. the regulator should be at 3.3V anyway and only when it
reaches UHS speeds should the mmc core reduce the voltage
to 1.8V, so having this variable here, shouldn't pose a problem?

So maybe you could explain a bit more what the problem is?


Thanks
Heiko

> ---
>  arch/arm/boot/dts/rk3288-vyasa.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
> index 7a0f945..915b4a3 100644
> --- a/arch/arm/boot/dts/rk3288-vyasa.dts
> +++ b/arch/arm/boot/dts/rk3288-vyasa.dts
> @@ -214,7 +214,7 @@
>  
>  			vccio_sd: LDO_REG5 {
>  				regulator-name = "vccio_sd";
> -				regulator-min-microvolt = <1800000>;
> +				regulator-min-microvolt = <3300000>;
>  				regulator-max-microvolt = <3300000>;
>  				regulator-always-on;
>  				regulator-boot-on;
> 


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/9] ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC

[Heiko Stuebner]

Am Montag, 16. Oktober 2017, 17:46:21 CEST schrieb Jagan Teki:
> rk808, SWITCH_REG1 has configured for sdmmc regulator as vcc_sd,
> so use the same by renaming vcc33_sd to vcc_sd(as per schematic)
> and drop explicit regulator definition from root.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

applied for 4.15

Re: [PATCH 4/9] ARM: dts: rockchip: Add regulators for rk3288-vyasa

[Heiko Stuebner]

Am Montag, 16. Oktober 2017, 17:46:22 CEST schrieb Jagan Teki:
> Add supporting regulators for rk3288-vyasa board, dc12_vbat is
> parent regulatorand followed regulators as are child regulators.
> regulator naming conversion followed as per schematic for better
> readability and easy for identification.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

applied for 4.15

Re: [PATCH 5/9] ARM: dts: rockchip: Add gmac support for rk3288-vyasa board

[Heiko Stuebner]

Am Montag, 16. Oktober 2017, 17:46:23 CEST schrieb Jagan Teki:
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

I've picked your v2 of the patch.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 6/9] ARM: dts: rockchip: Add usb host for rk3288-vyasa

[Heiko Stuebner]

Am Montag, 16. Oktober 2017, 17:46:24 CEST schrieb Jagan Teki:
> Add usb host support for rk3288-vyasa, board support hub power
> through phy_pwr_en and usb2 host power through usb2_pwr_en and
> naming conversion followed as per schematic.
> 
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

applied for 4.15, after dropping the RK_GPIO8 addition and making
the pin use "8" directly instead of the outdated constant.

It isn't planned to extend this GPIOx -> x ... instead it is more or
less deprecated.

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 7/9] ARM: dts: rockchip: Add usb otg for rk3288-vyasa

[Heiko Stuebner]

Am Montag, 16. Oktober 2017, 17:46:25 CEST schrieb Jagan Teki:
> Add usb otg support for rk3288-vyasa, board support usb1 otg
> power through otg_vbus_drv and naming conversion followed
> as per schematic.
> 
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

applied for 4.15
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 8/9] ARM: dts: rockchip: Add io domains for rk3288-vyasa

[Heiko Stuebner]

Am Montag, 16. Oktober 2017, 17:46:26 CEST schrieb Jagan Teki:
> Add io domains supported by rk3288-vyasa board.
> 
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

applied for 4.15 after moving it below the i2c node
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html