From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: linux-media@vger.kernel.org
Cc: linux-sh@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 4/6] v4l: vsp1: Add DT support
Date: Wed, 05 Mar 2014 20:30:27 +0100 [thread overview]
Message-ID: <4542787.8JEGs6DclK@avalon> (raw)
In-Reply-To: <1394047444-30077-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
.../devicetree/bindings/media/renesas,vsp1.txt | 51 +++++++++++++++++++++
drivers/media/platform/vsp1/vsp1_drv.c | 52 ++++++++++++++++++----
2 files changed, 95 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/renesas,vsp1.txt
(With the DT mailing list CC'ed this time, sorry about that)
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
new file mode 100644
index 0000000..3b828d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
@@ -0,0 +1,51 @@
+* Renesas VSP1 Video Processing Engine
+
+The VSP1 is a video processing engine that supports up-/down-scaling, alpha
+blending, color space conversion and various other image processing features.
+It can be found in the Renesas R-Car second generation SoCs.
+
+Required properties:
+
+ - compatible: Must contain "renesas,vsp1"
+
+ - reg: Base address and length of the registers block for the VSP1.
+ - interrupt-parent, interrupts: Specifier for the VSP1 interrupt.
+
+ - clocks: A list of phandle + clock-specifier pairs for the main VSP1 clock
+ and the optional auxiliary RT clock if needed. VSP1 instances that need an
+ auxiliary RT clock must specify the clock-names property.
+
+ - renesas,#rpf: Number of Read Pixel Formatter (RPF) modules in the VSP1.
+ - renesas,#uds: Number of Up Down Scaler (UDS) modules in the VSP1.
+ - renesas,#wpf: Number of Write Pixel Formatter (WPF) modules in the VSP1.
+
+
+Optional properties:
+
+ - clock-names: When the VSP1 requires an auxiliary RT clock this property
+ must be present and must contain "", "rt".
+
+ - renesas,has-lif: Boolean, indicates that the LCD Interface (LIF) module is
+ available.
+ - renesas,has-lut: Boolean, indicates that the Look Up Table (LUT) module is
+ available.
+ - renesas,has-sru: Boolean, indicates that the Super Resolution Unit (SRU)
+ module is available.
+
+
+Example: R8A7790 (R-Car H2) VSP1-S node
+
+ vsp1@fe928000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe928000 0 0x8000>;
+ interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_VSP1_SY>,
+ <&mstp1_clks R8A7790_CLK_VSP1_RT>;
+ clock-names = "", "rt";
+
+ renesas,has-lut;
+ renesas,has-sru;
+ renesas,#rpf = <5>;
+ renesas,#uds = <3>;
+ renesas,#wpf = <4>;
+ };
diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
index 5f774cc..b75ca84 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
@@ -16,6 +16,7 @@
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/videodev2.h>
@@ -458,34 +459,59 @@ static const struct dev_pm_ops vsp1_pm_ops = {
* Platform Driver
*/
-static struct vsp1_platform_data *
-vsp1_get_platform_data(struct platform_device *pdev)
+static int vsp1_validate_platform_data(struct platform_device *pdev,
+ struct vsp1_platform_data *pdata)
{
- struct vsp1_platform_data *pdata = pdev->dev.platform_data;
-
if (pdata == NULL) {
dev_err(&pdev->dev, "missing platform data\n");
- return NULL;
+ return -EINVAL;
}
if (pdata->rpf_count <= 0 || pdata->rpf_count > VPS1_MAX_RPF) {
dev_err(&pdev->dev, "invalid number of RPF (%u)\n",
pdata->rpf_count);
- return NULL;
+ return -EINVAL;
}
if (pdata->uds_count <= 0 || pdata->uds_count > VPS1_MAX_UDS) {
dev_err(&pdev->dev, "invalid number of UDS (%u)\n",
pdata->uds_count);
- return NULL;
+ return -EINVAL;
}
if (pdata->wpf_count <= 0 || pdata->wpf_count > VPS1_MAX_WPF) {
dev_err(&pdev->dev, "invalid number of WPF (%u)\n",
pdata->wpf_count);
- return NULL;
+ return -EINVAL;
}
+ return 0;
+}
+
+static struct vsp1_platform_data *
+vsp1_get_platform_data(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct vsp1_platform_data *pdata;
+
+ if (!IS_ENABLED(CONFIG_OF) || np == NULL)
+ return pdev->dev.platform_data;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (pdata == NULL)
+ return NULL;
+
+ if (of_property_read_bool(np, "renesas,has-lif"))
+ pdata->features |= VSP1_HAS_LIF;
+ if (of_property_read_bool(np, "renesas,has-lut"))
+ pdata->features |= VSP1_HAS_LUT;
+ if (of_property_read_bool(np, "renesas,has-sru"))
+ pdata->features |= VSP1_HAS_SRU;
+
+ of_property_read_u32(np, "renesas,#rpf", &pdata->rpf_count);
+ of_property_read_u32(np, "renesas,#uds", &pdata->uds_count);
+ of_property_read_u32(np, "renesas,#wpf", &pdata->wpf_count);
+
return pdata;
}
@@ -508,6 +534,10 @@ static int vsp1_probe(struct platform_device *pdev)
if (vsp1->pdata == NULL)
return -ENODEV;
+ ret = vsp1_validate_platform_data(pdev, vsp1->pdata);
+ if (ret < 0)
+ return ret;
+
/* I/O, IRQ and clock resources */
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
vsp1->mmio = devm_ioremap_resource(&pdev->dev, io);
@@ -557,6 +587,11 @@ static int vsp1_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id vsp1_of_match[] = {
+ { .compatible = "renesas,vsp1" },
+ { },
+};
+
static struct platform_driver vsp1_platform_driver = {
.probe = vsp1_probe,
.remove = vsp1_remove,
@@ -564,6 +599,7 @@ static struct platform_driver vsp1_platform_driver = {
.owner = THIS_MODULE,
.name = "vsp1",
.pm = &vsp1_pm_ops,
+ .of_match_table = of_match_ptr(vsp1_of_match),
},
};
--
1.8.3.2
next parent reply other threads:[~2014-03-05 19:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1394047444-30077-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
2014-03-05 19:30 ` Laurent Pinchart [this message]
2014-03-25 12:18 ` [PATCH 4/6] v4l: vsp1: Add DT support Laurent Pinchart
2014-04-10 23:04 ` Simon Horman
2014-04-10 23:37 ` Laurent Pinchart
2014-04-11 0:04 ` Simon Horman
2014-04-08 16:16 ` [PATCH v3 " Laurent Pinchart
2014-04-08 16:26 ` Sylwester Nawrocki
2014-04-08 16:46 ` [PATCH v4 4.1/6] v4l: vsp1: Add DT bindings documentation Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4542787.8JEGs6DclK@avalon \
--to=laurent.pinchart+renesas@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).