[PATCH 0/6] Enable MSM8226 TSENS support

[PATCH 0/6] Enable MSM8226 TSENS support

[Matti Lehtimäki]

Add support for tsens in MSM8226. Add qfprom compatible for MSM8226.
Add device tree nodes for qfprom, tsens and thermal zones for MSM8226.

Matti Lehtimäki (6):
  dt-bindings: nvmem: qfprom: Add compatible for MSM8226
  dt-bindings: thermal: tsens: Add compatible for MSM8226
  thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
  ARM: dts: msm8226: Add qfprom node
  ARM: dts: msm8226: Add tsens node and related nvmem cells
  ARM: dts: msm8226: Add thermal zones node

 .../bindings/nvmem/qcom,qfprom.yaml           |   1 +
 .../bindings/thermal/qcom-tsens.yaml          |   1 +
 arch/arm/boot/dts/qcom-msm8226.dtsi           | 164 ++++++++++++++++++
 drivers/thermal/qcom/tsens-v0_1.c             |  27 ++-
 drivers/thermal/qcom/tsens.c                  |   3 +
 drivers/thermal/qcom/tsens.h                  |   2 +-
 6 files changed, 196 insertions(+), 2 deletions(-)

-- 
2.34.1

[PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226

[Matti Lehtimäki]

Document QFPROM compatible for MSM8226.

Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
---
 Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 2173fe82317d..0baf7819ab46 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -20,6 +20,7 @@ properties:
           - qcom,apq8084-qfprom
           - qcom,ipq8064-qfprom
           - qcom,ipq8074-qfprom
+          - qcom,msm8226-qfprom
           - qcom,msm8916-qfprom
           - qcom,msm8974-qfprom
           - qcom,msm8976-qfprom
-- 
2.34.1

[PATCH 2/6] dt-bindings: thermal: tsens: Add compatible for MSM8226

[Matti Lehtimäki]

Qualcomm MSM8226 has tsens v0.1 block.

Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 926e9c51c93c..d6b2957d5137 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -29,6 +29,7 @@ properties:
         items:
           - enum:
               - qcom,mdm9607-tsens
+              - qcom,msm8226-tsens
               - qcom,msm8916-tsens
               - qcom,msm8939-tsens
               - qcom,msm8974-tsens
-- 
2.34.1

[PATCH 4/6] ARM: dts: msm8226: Add qfprom node

[Matti Lehtimäki]

Add missing QFPROM definition for MSM8226 SoC.

Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
---
 arch/arm/boot/dts/qcom-msm8226.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index c373081bc21b..c34b8f3139ae 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -505,6 +505,13 @@ restart@fc4ab000 {
 			reg = <0xfc4ab000 0x4>;
 		};
 
+		qfprom: qfprom@fc4bc000 {
+			compatible = "qcom,msm8226-qfprom", "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		spmi_bus: spmi@fc4cf000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg-names = "core", "intr", "cnfg";
-- 
2.34.1

[PATCH 5/6] ARM: dts: msm8226: Add tsens node and related nvmem cells

[Matti Lehtimäki]

Specify pre-parsed per-sensor calibration nvmem cells in the qfprom
device node rather than parsing the whole data blob in the driver.

Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
---
 arch/arm/boot/dts/qcom-msm8226.dtsi | 113 ++++++++++++++++++++++++++++
 1 file changed, 113 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index c34b8f3139ae..a0c3d25eea65 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -500,6 +500,34 @@ data-pins {
 			};
 		};
 
+		tsens: thermal-sensor@fc4a9000 {
+			compatible = "qcom,msm8226-tsens", "qcom,tsens-v0_1";
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2";
+			#qcom,sensors = <6>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
 		restart@fc4ab000 {
 			compatible = "qcom,pshold";
 			reg = <0xfc4ab000 0x4>;
@@ -510,6 +538,91 @@ qfprom: qfprom@fc4bc000 {
 			reg = <0xfc4bc000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			tsens_base1: base1@1c1 {
+				reg = <0x1c1 0x2>;
+				bits = <5 8>;
+			};
+
+			tsens_s0_p1: s0-p1@1c2 {
+				reg = <0x1c2 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s1_p1: s1-p1@1c4 {
+				reg = <0x1c4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p1: s2-p1@1c4 {
+				reg = <0x1c4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p1: s3-p1@1c5 {
+				reg = <0x1c5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s4_p1: s4-p1@1c6 {
+				reg = <0x1c6 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s5_p1: s5-p1@1c7 {
+				reg = <0x1c7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s6_p1: s6-p1@1ca {
+				reg = <0x1ca 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_base2: base2@1cc {
+				reg = <0x1cc 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p2: s0-p2@1cd {
+				reg = <0x1cd 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p2: s1-p2@1cd {
+				reg = <0x1cd 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p2: s2-p2@1ce {
+				reg = <0x1ce 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p2: s3-p2@1cf {
+				reg = <0x1cf 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p2: s4-p2@446 {
+				reg = <0x446 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s5_p2: s5-p2@447 {
+				reg = <0x447 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s6_p2: s6-p2@44e {
+				reg = <0x44e 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_mode: mode@44f {
+				reg = <0x44f 0x1>;
+				bits = <5 3>;
+			};
 		};
 
 		spmi_bus: spmi@fc4cf000 {
-- 
2.34.1

[PATCH 6/6] ARM: dts: msm8226: Add thermal zones node

[Matti Lehtimäki]

Add thermal zones present on MSM8226 SoC.

Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
---
 arch/arm/boot/dts/qcom-msm8226.dtsi | 44 +++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index a0c3d25eea65..f68556b15183 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -752,6 +752,50 @@ smd-edge {
 		};
 	};
 
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 2
-- 
2.34.1

Re: [PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226

[Luca Weiss]

On Sonntag, 7. Mai 2023 22:12:19 CEST Matti Lehtimäki wrote:
> Document QFPROM compatible for MSM8226.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>

Reviewed-by: Luca Weiss <luca@z3ntu.xyz>

> ---
>  Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index
> 2173fe82317d..0baf7819ab46 100644
> --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> @@ -20,6 +20,7 @@ properties:
>            - qcom,apq8084-qfprom
>            - qcom,ipq8064-qfprom
>            - qcom,ipq8074-qfprom
> +          - qcom,msm8226-qfprom
>            - qcom,msm8916-qfprom
>            - qcom,msm8974-qfprom
>            - qcom,msm8976-qfprom

Re: [PATCH 2/6] dt-bindings: thermal: tsens: Add compatible for MSM8226

[Luca Weiss]

On Sonntag, 7. Mai 2023 22:12:20 CEST Matti Lehtimäki wrote:
> Qualcomm MSM8226 has tsens v0.1 block.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>

Reviewed-by: Luca Weiss <luca@z3ntu.xyz>

> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index
> 926e9c51c93c..d6b2957d5137 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -29,6 +29,7 @@ properties:
>          items:
>            - enum:
>                - qcom,mdm9607-tsens
> +              - qcom,msm8226-tsens
>                - qcom,msm8916-tsens
>                - qcom,msm8939-tsens
>                - qcom,msm8974-tsens

Re: [PATCH 4/6] ARM: dts: msm8226: Add qfprom node

[Luca Weiss]

On Sonntag, 7. Mai 2023 22:12:22 CEST Matti Lehtimäki wrote:
> Add missing QFPROM definition for MSM8226 SoC.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>

Reviewed-by: Luca Weiss <luca@z3ntu.xyz>

> ---
>  arch/arm/boot/dts/qcom-msm8226.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi
> b/arch/arm/boot/dts/qcom-msm8226.dtsi index c373081bc21b..c34b8f3139ae
> 100644
> --- a/arch/arm/boot/dts/qcom-msm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
> @@ -505,6 +505,13 @@ restart@fc4ab000 {
>  			reg = <0xfc4ab000 0x4>;
>  		};
> 
> +		qfprom: qfprom@fc4bc000 {
> +			compatible = "qcom,msm8226-qfprom", 
"qcom,qfprom";
> +			reg = <0xfc4bc000 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +		};
> +
>  		spmi_bus: spmi@fc4cf000 {
>  			compatible = "qcom,spmi-pmic-arb";
>  			reg-names = "core", "intr", "cnfg";

Re: [PATCH 5/6] ARM: dts: msm8226: Add tsens node and related nvmem cells

[Luca Weiss]

On Sonntag, 7. Mai 2023 22:12:23 CEST Matti Lehtimäki wrote:
> Specify pre-parsed per-sensor calibration nvmem cells in the qfprom
> device node rather than parsing the whole data blob in the driver.

I haven't double checked all the qfprom offsets but since you verified it
twice on your side, I believe you ;)

Reviewed-by: Luca Weiss <luca@z3ntu.xyz>

> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> ---
>  arch/arm/boot/dts/qcom-msm8226.dtsi | 113 ++++++++++++++++++++++++++++
>  1 file changed, 113 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi
> b/arch/arm/boot/dts/qcom-msm8226.dtsi index c34b8f3139ae..a0c3d25eea65
> 100644
> --- a/arch/arm/boot/dts/qcom-msm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
> @@ -500,6 +500,34 @@ data-pins {
>  			};
>  		};
> 
> +		tsens: thermal-sensor@fc4a9000 {
> +			compatible = "qcom,msm8226-tsens", "qcom,tsens-v0_1";
> +			reg = <0xfc4a9000 0x1000>, /* TM */
> +			      <0xfc4a8000 0x1000>; /* SROT */
> +			nvmem-cells = <&tsens_mode>,
> +				      <&tsens_base1>, <&tsens_base2>,
> +				      <&tsens_s0_p1>, <&tsens_s0_p2>,
> +				      <&tsens_s1_p1>, <&tsens_s1_p2>,
> +				      <&tsens_s2_p1>, <&tsens_s2_p2>,
> +				      <&tsens_s3_p1>, <&tsens_s3_p2>,
> +				      <&tsens_s4_p1>, <&tsens_s4_p2>,
> +				      <&tsens_s5_p1>, <&tsens_s5_p2>,
> +				      <&tsens_s6_p1>, <&tsens_s6_p2>;
> +			nvmem-cell-names = "mode",
> +					   "base1", "base2",
> +					   "s0_p1", "s0_p2",
> +					   "s1_p1", "s1_p2",
> +					   "s2_p1", "s2_p2",
> +					   "s3_p1", "s3_p2",
> +					   "s4_p1", "s4_p2",
> +					   "s5_p1", "s5_p2",
> +					   "s6_p1", "s6_p2";
> +			#qcom,sensors = <6>;
> +			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow";
> +			#thermal-sensor-cells = <1>;
> +		};
> +
>  		restart@fc4ab000 {
>  			compatible = "qcom,pshold";
>  			reg = <0xfc4ab000 0x4>;
> @@ -510,6 +538,91 @@ qfprom: qfprom@fc4bc000 {
>  			reg = <0xfc4bc000 0x1000>;
>  			#address-cells = <1>;
>  			#size-cells = <1>;
> +
> +			tsens_base1: base1@1c1 {
> +				reg = <0x1c1 0x2>;
> +				bits = <5 8>;
> +			};
> +
> +			tsens_s0_p1: s0-p1@1c2 {
> +				reg = <0x1c2 0x2>;
> +				bits = <5 6>;
> +			};
> +
> +			tsens_s1_p1: s1-p1@1c4 {
> +				reg = <0x1c4 0x1>;
> +				bits = <0 6>;
> +			};
> +
> +			tsens_s2_p1: s2-p1@1c4 {
> +				reg = <0x1c4 0x2>;
> +				bits = <6 6>;
> +			};
> +
> +			tsens_s3_p1: s3-p1@1c5 {
> +				reg = <0x1c5 0x2>;
> +				bits = <4 6>;
> +			};
> +
> +			tsens_s4_p1: s4-p1@1c6 {
> +				reg = <0x1c6 0x1>;
> +				bits = <2 6>;
> +			};
> +
> +			tsens_s5_p1: s5-p1@1c7 {
> +				reg = <0x1c7 0x1>;
> +				bits = <0 6>;
> +			};
> +
> +			tsens_s6_p1: s6-p1@1ca {
> +				reg = <0x1ca 0x2>;
> +				bits = <4 6>;
> +			};
> +
> +			tsens_base2: base2@1cc {
> +				reg = <0x1cc 0x1>;
> +				bits = <0 8>;
> +			};
> +
> +			tsens_s0_p2: s0-p2@1cd {
> +				reg = <0x1cd 0x1>;
> +				bits = <0 6>;
> +			};
> +
> +			tsens_s1_p2: s1-p2@1cd {
> +				reg = <0x1cd 0x2>;
> +				bits = <6 6>;
> +			};
> +
> +			tsens_s2_p2: s2-p2@1ce {
> +				reg = <0x1ce 0x2>;
> +				bits = <4 6>;
> +			};
> +
> +			tsens_s3_p2: s3-p2@1cf {
> +				reg = <0x1cf 0x1>;
> +				bits = <2 6>;
> +			};
> +
> +			tsens_s4_p2: s4-p2@446 {
> +				reg = <0x446 0x2>;
> +				bits = <4 6>;
> +			};
> +
> +			tsens_s5_p2: s5-p2@447 {
> +				reg = <0x447 0x1>;
> +				bits = <2 6>;
> +			};
> +
> +			tsens_s6_p2: s6-p2@44e {
> +				reg = <0x44e 0x1>;
> +				bits = <1 6>;
> +			};
> +
> +			tsens_mode: mode@44f {
> +				reg = <0x44f 0x1>;
> +				bits = <5 3>;
> +			};
>  		};
> 
>  		spmi_bus: spmi@fc4cf000 {

Re: [PATCH 5/6] ARM: dts: msm8226: Add tsens node and related nvmem cells

[Dmitry Baryshkov]

On 07/05/2023 23:12, Matti Lehtimäki wrote:
> Specify pre-parsed per-sensor calibration nvmem cells in the qfprom
> device node rather than parsing the whole data blob in the driver.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> ---
>   arch/arm/boot/dts/qcom-msm8226.dtsi | 113 ++++++++++++++++++++++++++++
>   1 file changed, 113 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

I did not manually check all the offsets, but they look sane to me.

-- 
With best wishes
Dmitry

Re: [PATCH 6/6] ARM: dts: msm8226: Add thermal zones node

[Dmitry Baryshkov]

On 07/05/2023 23:12, Matti Lehtimäki wrote:
> Add thermal zones present on MSM8226 SoC.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   arch/arm/boot/dts/qcom-msm8226.dtsi | 44 +++++++++++++++++++++++++++++
>   1 file changed, 44 insertions(+)


-- 
With best wishes
Dmitry

Re: [PATCH 4/6] ARM: dts: msm8226: Add qfprom node

[Dmitry Baryshkov]

On 07/05/2023 23:12, Matti Lehtimäki wrote:
> Add missing QFPROM definition for MSM8226 SoC.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> ---
>   arch/arm/boot/dts/qcom-msm8226.dtsi | 7 +++++++
>   1 file changed, 7 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH 2/6] dt-bindings: thermal: tsens: Add compatible for MSM8226

[Rob Herring]

On Sun, 07 May 2023 23:12:20 +0300, Matti Lehtimäki wrote:
> Qualcomm MSM8226 has tsens v0.1 block.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.example.dtb: camera-sensor@3c: port:endpoint:data-lanes: [[1]] is too short
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml

doc reference errors (make refcheckdocs):
Documentation/usb/gadget_uvc.rst: Documentation/userspace-api/media/v4l/pixfmt-packed.yuv.rst
MAINTAINERS: Documentation/devicetree/bindings/pwm/pwm-apple.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230507201225.89694-3-matti.lehtimaki@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226

[Rob Herring]

On Sun, 07 May 2023 23:12:19 +0300, Matti Lehtimäki wrote:
> Document QFPROM compatible for MSM8226.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> ---
>  Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.example.dtb: camera-sensor@3c: port:endpoint:data-lanes: [[1]] is too short
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml

doc reference errors (make refcheckdocs):
Documentation/usb/gadget_uvc.rst: Documentation/userspace-api/media/v4l/pixfmt-packed.yuv.rst
MAINTAINERS: Documentation/devicetree/bindings/pwm/pwm-apple.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230507201225.89694-2-matti.lehtimaki@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226

[Konrad Dybcio]

On 7.05.2023 23:25, Rob Herring wrote:
> 
> On Sun, 07 May 2023 23:12:19 +0300, Matti Lehtimäki wrote:
>> Document QFPROM compatible for MSM8226.
>>
>> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
>> ---
>>  Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +
>>  1 file changed, 1 insertion(+)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.example.dtb: camera-sensor@3c: port:endpoint:data-lanes: [[1]] is too short
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
> 
> doc reference errors (make refcheckdocs):
> Documentation/usb/gadget_uvc.rst: Documentation/userspace-api/media/v4l/pixfmt-packed.yuv.rst
> MAINTAINERS: Documentation/devicetree/bindings/pwm/pwm-apple.yaml
Rob, your bot seems to have picked up a false positive

Konrad
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230507201225.89694-2-matti.lehtimaki@gmail.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

Re: [PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226

[Krzysztof Kozlowski]

On 07/05/2023 22:12, Matti Lehtimäki wrote:
> Document QFPROM compatible for MSM8226.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> ---
>  Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Bot's errors can be ignored.

Best regards,
Krzysztof

Re: [PATCH 2/6] dt-bindings: thermal: tsens: Add compatible for MSM8226

[Krzysztof Kozlowski]

On 07/05/2023 22:12, Matti Lehtimäki wrote:
> Qualcomm MSM8226 has tsens v0.1 block.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Bot's errors can be ignored.

Best regards,
Krzysztof

Re: [PATCH 4/6] ARM: dts: msm8226: Add qfprom node

[Krzysztof Kozlowski]

On 07/05/2023 22:12, Matti Lehtimäki wrote:
> Add missing QFPROM definition for MSM8226 SoC.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> ---
>  arch/arm/boot/dts/qcom-msm8226.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
> index c373081bc21b..c34b8f3139ae 100644
> --- a/arch/arm/boot/dts/qcom-msm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
> @@ -505,6 +505,13 @@ restart@fc4ab000 {
>  			reg = <0xfc4ab000 0x4>;
>  		};
>  
> +		qfprom: qfprom@fc4bc000 {

We usually call this efuse@

qfprom is Qualcomm specific.

Best regards,
Krzysztof

Re: [PATCH 4/6] ARM: dts: msm8226: Add qfprom node

[Dmitry Baryshkov]

On Wed, 10 May 2023 at 16:59, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 07/05/2023 22:12, Matti Lehtimäki wrote:
> > Add missing QFPROM definition for MSM8226 SoC.
> >
> > Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> > ---
> >  arch/arm/boot/dts/qcom-msm8226.dtsi | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
> > index c373081bc21b..c34b8f3139ae 100644
> > --- a/arch/arm/boot/dts/qcom-msm8226.dtsi
> > +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
> > @@ -505,6 +505,13 @@ restart@fc4ab000 {
> >                       reg = <0xfc4ab000 0x4>;
> >               };
> >
> > +             qfprom: qfprom@fc4bc000 {
>
> We usually call this efuse@

We have 5 efuse@ and 14 qfprom@ (next/master). But that probably means
that we should rename existing qfprom@ to efuse@.

>
> qfprom is Qualcomm specific.
>
> Best regards,
> Krzysztof
>


-- 
With best wishes
Dmitry

Re: [PATCH 2/6] dt-bindings: thermal: tsens: Add compatible for MSM8226

[Daniel Lezcano]

On 07/05/2023 22:12, Matti Lehtimäki wrote:
> Qualcomm MSM8226 has tsens v0.1 block.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> ---

Applied, thanks

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: (subset) [PATCH 0/6] Enable MSM8226 TSENS support

[Bjorn Andersson]

On Sun, 7 May 2023 23:12:18 +0300, Matti Lehtimäki wrote:
> Add support for tsens in MSM8226. Add qfprom compatible for MSM8226.
> Add device tree nodes for qfprom, tsens and thermal zones for MSM8226.
> 
> Matti Lehtimäki (6):
>   dt-bindings: nvmem: qfprom: Add compatible for MSM8226
>   dt-bindings: thermal: tsens: Add compatible for MSM8226
>   thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
>   ARM: dts: msm8226: Add qfprom node
>   ARM: dts: msm8226: Add tsens node and related nvmem cells
>   ARM: dts: msm8226: Add thermal zones node
> 
> [...]

Applied, thanks!

[4/6] ARM: dts: msm8226: Add qfprom node
      commit: 16a9fa7ab27b69be3a34b97ff8c7b034fcc73b88
[5/6] ARM: dts: msm8226: Add tsens node and related nvmem cells
      commit: 0f8861c9fc7cc9af6d6f65d6657aa9cf2531b29c
[6/6] ARM: dts: msm8226: Add thermal zones node
      commit: 8d4236f62f3acbc6a0def79106c13fe7344d8238

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: [PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226

[Srinivas Kandagatla]

On 07/05/2023 21:12, Matti Lehtimäki wrote:
> Document QFPROM compatible for MSM8226.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> ---

Applied thanks,

--srini
>   Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> index 2173fe82317d..0baf7819ab46 100644
> --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> @@ -20,6 +20,7 @@ properties:
>             - qcom,apq8084-qfprom
>             - qcom,ipq8064-qfprom
>             - qcom,ipq8074-qfprom
> +          - qcom,msm8226-qfprom
>             - qcom,msm8916-qfprom
>             - qcom,msm8974-qfprom
>             - qcom,msm8976-qfprom