From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Stuebner Subject: Re: [PATCH] arm64: dts: rockchip: assign clock rate for ACLK_VIO Date: Mon, 12 Mar 2018 11:52:54 +0100 Message-ID: <4610682.YhluMk2iks@phil> References: <1520819448-8316-1-git-send-email-zhengsq@rock-chips.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: <1520819448-8316-1-git-send-email-zhengsq@rock-chips.com> Sender: linux-kernel-owner@vger.kernel.org To: Shunqian Zheng Cc: linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, dianders@chromium.org List-Id: devicetree@vger.kernel.org Am Montag, 12. März 2018, 02:50:48 CET schrieb Shunqian Zheng: > The ACLK_VIO is a parent clock used by a several children, > its suggested clock rate is 400MHz. Right now it gets 400MHz > because it sources from CPLL(800M) and divides by 2 after reset. > It's good not to rely on default values like this, so let's > explicitly set it. > NOTE: it's expected that at least one board may override cru node and > set the CPLL to 1.6 GHz. On that board it will be very important to be > explicit about aclk-vio being 400 MHz. > > Signed-off-by: Shunqian Zheng applied for 4.17 Thanks Heiko