Re: [RFC PATCH 0/5] iio: adc: Add initial support for TI ADS1262

[David Lechner <dlechner@baylibre.com>]

On 5/1/25 5:00 AM, Sayyad Abid wrote:
> The ADS1262 is a 32-bit, high-resolution delta-sigma ADC communicating
> over SPI. It's designed for precision measurements.
> 
> This initial driver provides the basic functionality needed to:
>  - Probe and register the device via SPI.
>  - Expose standard IIO channels for reading raw voltage samples.
> 
> Basic testing was performed on a Raspberry Pi Zero 2W using the hardware
> SPI0 interface. The connections used were:
> 
> +-----------------+            +-----------------+
> | RPi Zero 2W     |            | TI ADS1262      |
> | (SPI0 Pins)     |            |                 |
> |-----------------|            |-----------------|
> | MOSI            |----------->| DIN             |
> | MISO            |<-----------| DOUT/DRDY       |
> | SCLK            |----------->| SCLK            |
> | CE0             |----------->| /CS             |
> | 5V              |----------->| DVDD, AVDD      |
> | GND             |----------->| DGND, AGND      |
> +-----------------+            +-----------------+
> 
> I would greatly appreciate any feedback on the driver structure,
> IIO integration, SPI communication handling, or any potential issues
> or areas for improvement you might spot.
> 
> This series is broken down as follows:
>  Patch 1: Adds the core driver code (ti-ads1262.c).
>  Patch 2: Adds the Kconfig option.
>  Patch 3: Adds the Makefile entry for compilation.
>  Patch 4: Adds the MAINTAINERS entry.
> 
> Thanks for your time and consideration.
> 
> Sayyad Abid (5):
>   iio: adc: ti-ads1262.c: add initial driver for TI ADS1262 ADC
>   iio: adc: Kconfig: add Kconfig entry for TI ADS1262 driver
>   iio: adc: Makefile: add compile support for TI ADS1262 driver
>   MAINTAINERS: add entry for TI ADS1262 ADC driver
>   dt-bindings: iio: adc: add bindings for TI ADS1262
> 
>  .../bindings/iio/adc/ti,ads1262.yaml          | 189 ++++++++
>  MAINTAINERS                                   |   7 +
>  drivers/iio/adc/Kconfig                       |  12 +
>  drivers/iio/adc/Makefile                      |   1 +
>  drivers/iio/adc/ti-ads1262.c                  | 438 ++++++++++++++++++
>  5 files changed, 647 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1262.yaml
>  create mode 100644 drivers/iio/adc/ti-ads1262.c
> 
> --
> 2.39.5
> 

It looks like you managed to CC everyone who ever touched the IIO ADC makefile.
On v2, you don't need to include quite so many. :-) Just the people listed in
MAINTAINERS.

And you can drop the RFC on v2, there doesn't seem to be anything unusual that
needs more than regular review. v1 didn't really need the RFC either and is
quite good for a first IIO driver. ;-)