From: Baolin Wang <baolin.wang@linaro.org>
To: robh+dt@kernel.org, mark.rutland@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com, arnd@arndb.de
Cc: chunyan.zhang@spreadtrum.com, orson.zhai@spreadtrum.com,
mathieu.poirier@linaro.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, broonie@kernel.org,
baolin.wang@linaro.org
Subject: [PATCH 7/7] arm64: dts: Add SC2731 PMIC dts file for Spreadtrum SC9860
Date: Tue, 6 Feb 2018 17:28:26 +0800 [thread overview]
Message-ID: <46ddcf7e35d89c232b13f80234ceb05ae254da2a.1517908478.git.baolin.wang@linaro.org> (raw)
In-Reply-To: <410b2f2d3f3f019c96ec31213647c41cd7f1174d.1517908478.git.baolin.wang@linaro.org>
In-Reply-To: <410b2f2d3f3f019c96ec31213647c41cd7f1174d.1517908478.git.baolin.wang@linaro.org>
The Spreadtrum SC9860 platform has one SC2731 PMIC, and the SC2731
PMIC integrates all mobile handset power management, audio codec,
battery management and user interface support function in a single
chip.
This patch adds the SC2731 dts file, as well as adding the RTC and
regulator device node for this PMIC.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
arch/arm64/boot/dts/sprd/sc2731.dtsi | 169 +++++++++++++++++++++++++++++
arch/arm64/boot/dts/sprd/sp9860g-1h10.dts | 1 +
2 files changed, 170 insertions(+)
create mode 100644 arch/arm64/boot/dts/sprd/sc2731.dtsi
diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
new file mode 100644
index 0000000..4331006
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -0,0 +1,169 @@
+/*
+ * Spreadtrum SC2731 PMIC dts file
+ *
+ * Copyright (C) 2018, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+&adi_bus {
+ sc2731_pmic: pmic@0 {
+ compatible = "sprd,sc2731";
+ reg = <0>;
+ spi-max-frequency = <26000000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@280 {
+ compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc";
+ reg = <0x280>;
+ interrupt-parent = <&sc2731_pmic>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ regulators {
+ compatible = "sprd,sc27xx-regulator";
+
+ vddarm0: BUCK_CPU0 {
+ regulator-name = "vddarm0";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1996875>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ };
+
+ vddarm1: BUCK_CPU1 {
+ regulator-name = "vddarm1";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1996875>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ };
+
+ dcdcrf: BUCK_RF {
+ regulator-name = "dcdcrf";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2196875>;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-always-on;
+ };
+
+ vddcama0: LDO_CAMA0 {
+ regulator-name = "vddcama0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ };
+
+ vddcama1: LDO_CAMA1 {
+ regulator-name = "vddcama1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddcammot: LDO_CAMMOT {
+ regulator-name = "vddcammot";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddvldo: LDO_VLDO {
+ regulator-name = "vddvldo";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddemmccore: LDO_EMMCCORE {
+ regulator-name = "vddemmccore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ regulator-boot-on;
+ };
+
+ vddsdcore: LDO_SDCORE {
+ regulator-name = "vddsdcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddsdio: LDO_SDIO {
+ regulator-name = "vddsdio";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddwifipa: LDO_WIFIPA {
+ regulator-name = "vddwifipa";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddusb33: LDO_USB33 {
+ regulator-name = "vddusb33";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddcamd0: LDO_CAMD0 {
+ regulator-name = "vddcamd0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1793750>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddcamd1: LDO_CAMD1 {
+ regulator-name = "vddcamd1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1793750>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddcon: LDO_CON {
+ regulator-name = "vddcon";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1793750>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddcamio: LDO_CAMIO {
+ regulator-name = "vddcamio";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1793750>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddsram: LDO_SRAM {
+ regulator-name = "vddsram";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1793750>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
index 550f323..3bd18e3 100644
--- a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
+++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include "sc9860.dtsi"
+#include "sc2731.dtsi"
/ {
model = "Spreadtrum SP9860G 3GFHD Board";
--
1.7.9.5
prev parent reply other threads:[~2018-02-06 9:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-06 9:28 [PATCH 1/7] arm64: dts: Add hwspinlock node for Spreadtrum SC9860 Baolin Wang
2018-02-06 9:28 ` [PATCH 2/7] arm64: dts: Add ADI device " Baolin Wang
2018-02-06 9:28 ` [PATCH 3/7] arm64: dts: Add pin controller " Baolin Wang
2018-02-06 9:28 ` [PATCH 4/7] arm64: dts: Add timer " Baolin Wang
[not found] ` <410b2f2d3f3f019c96ec31213647c41cd7f1174d.1517908478.git.baolin.wang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2018-02-06 9:28 ` [PATCH 5/7] arm64: dts: Add watchdog device " Baolin Wang
2018-02-06 9:28 ` [PATCH 6/7] arm64: dts: Add DMA " Baolin Wang
2018-02-06 9:28 ` Baolin Wang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46ddcf7e35d89c232b13f80234ceb05ae254da2a.1517908478.git.baolin.wang@linaro.org \
--to=baolin.wang@linaro.org \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=chunyan.zhang@spreadtrum.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathieu.poirier@linaro.org \
--cc=orson.zhai@spreadtrum.com \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).