Re: [PATCH v10 5/5] arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board

[tessolveupstream@gmail.com]

On 08-01-2026 14:06, Konrad Dybcio wrote:
>>>>> + */
>>>>> +/dts-v1/;
>>>>> +/plugin/;
>>>>> +
>>>>> +#include <dt-bindings/gpio/gpio.h>
>>>>> +
>>>>> +&{/} {
>>>>> +	backlight: backlight {
>>>>> +		compatible = "gpio-backlight";
>>>>> +		gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>,
>>>>> +			<&tlmm 115 GPIO_ACTIVE_HIGH>;
>>>>> +		default-on;
>>>>> +	};
>>>>> +
>>>>> +	hdmi_connector: hdmi-out {
>>>>> +		status = "disabled";
>>>>> +	};
>>>> This should be a &label_reference
>>>>
>>> Okay, will add it in the next patch.
>> I noticed that in several existing .dtso files, the root node is
>> commonly referenced as &{/}. In your comment, you suggested using &label_reference. Could you please clarify which specific label or 
>> node you would like me to update here.
> &{/} must be used for root nodes in a .dtso (for it to compile). I meant
> using a &label_reference for hdmi_connector

Thank you for clarifying. I’ve updated the patch to move 
hdmi_connector out of the root node and reference it using 
&hdmi_connector instead of defining it under &{/} like below:

git diff arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.
diff --git a/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso b/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,
index 5393d1dc7fea..bd1cbfc866b7 100644
--- a/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso
+++ b/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso
@@ -15,10 +15,6 @@ backlight: backlight {
                default-on;
        };

-       hdmi_connector: hdmi-out {
-               status = "disabled";
-       };
-
        panel-lvds {
                compatible = "auo,g133han01";

@@ -49,6 +45,10 @@ lvds_panel_out_b: endpoint {
        };
 };

+&hdmi_connector {
+       status = "disabled";
+};
+
 &i2c1 {
        clock-frequency = <400000>;

Could you please confirm if this change aligns with your 
expectation.