devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Luca Weiss <luca@z3ntu.xyz>
To: linux-arm-msm@vger.kernel.org, Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] ARM: dts: msm8974: castor: Define pm8841 regulators
Date: Mon, 28 Nov 2022 18:49:10 +0100	[thread overview]
Message-ID: <4785971.31r3eYUQgx@g550jk> (raw)
In-Reply-To: <c6f52e13-3692-5739-eabd-550936f34bed@linaro.org>

On Montag, 21. November 2022 23:32:22 CET Konrad Dybcio wrote:
> On 21.11.2022 22:22, Luca Weiss wrote:
> > From: Bjorn Andersson <bjorn.andersson@linaro.org>
> > 
> > Define the pm8841 regulators under SMD/RPM, to allow the modem
> > remoteproc to set the voltage during boot of the remote processor.
> > 
> > Entries are just copied from the Honami dts.
> 
> I hope it was supposed to be "identical to" and not "copied and hoped it
> would be ok" :/

Blame Bjorn from many years ago :P

But I just double checked and in some Sony msm8974 kernel sources I have on my 
computer (https://github.com/rcstar6696/android_kernel_sony_msm8974 branch 
cm-14.1) all Sony devices have the same values these pm8841 regulators, none 
have it overriden from what I could find. So should be fine.

Regards
Luca

> 
> Maybe I'm a bit picky, but I suppose this is said in a misleading way..
> 
> Konrad
> 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> > Changes in v2:
> > * new patch in this series
> > 
> >  ...-msm8974pro-sony-xperia-shinano-castor.dts | 24 +++++++++++++++++++
> >  1 file changed, 24 insertions(+)
> > 
> > diff --git
> > a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> > b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts index
> > 3f45f5c5d37b..2c33f84a6e4e 100644
> > --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> > +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> > @@ -319,6 +319,30 @@ led@7 {
> > 
> >  };
> >  
> >  &rpm_requests {
> > 
> > +	pm8841-regulators {
> > +		compatible = "qcom,rpm-pm8841-regulators";
> > +
> > +		pm8841_s1: s1 {
> > +			regulator-min-microvolt = <675000>;
> > +			regulator-max-microvolt = <1050000>;
> > +		};
> > +
> > +		pm8841_s2: s2 {
> > +			regulator-min-microvolt = <500000>;
> > +			regulator-max-microvolt = <1050000>;
> > +		};
> > +
> > +		pm8841_s3: s3 {
> > +			regulator-min-microvolt = <500000>;
> > +			regulator-max-microvolt = <1050000>;
> > +		};
> > +
> > +		pm8841_s4: s4 {
> > +			regulator-min-microvolt = <500000>;
> > +			regulator-max-microvolt = <1050000>;
> > +		};
> > +	};
> > +
> > 
> >  	pm8941-regulators {
> >  	
> >  		compatible = "qcom,rpm-pm8941-regulators";





  reply	other threads:[~2022-11-28 18:03 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-21 21:22 [PATCH v2 1/2] ARM: dts: msm8974: castor: Define pm8841 regulators Luca Weiss
2022-11-21 21:22 ` [PATCH v2 2/2] ARM: dts: qcom: msm8974-*: re-add remoteproc supplies Luca Weiss
2022-11-21 22:32 ` [PATCH v2 1/2] ARM: dts: msm8974: castor: Define pm8841 regulators Konrad Dybcio
2022-11-28 17:49   ` Luca Weiss [this message]
2022-12-28  4:36 ` (subset) " Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4785971.31r3eYUQgx@g550jk \
    --to=luca@z3ntu.xyz \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).