Re: [PATCH v2 1/4] dt-bindings: iio: hmc425a: add conditional GPIO array size constraints

[Ceclan Dumitru <mitrutzceclan@gmail.com>]

On 1/10/24 18:17, Conor Dooley wrote:
> On Wed, Jan 10, 2024 at 05:37:09PM +0200, Dumitru Ceclan wrote:...
>>    ctrl-gpios:
>>      description:
>> -      Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
>> -      connected to the control pins V1-V6.
>> -    minItems: 6
>> +      Must contain an array of GPIO specifiers, referring to the GPIO pins
>> +      connected to the control pins.
>> +        ADRF5740  - 4 GPIO connected to D2-D5
>> +        HMC540S   - 4 GPIO connected to V1-V4
>> +        HMC425A   - 6 GPIO connected to V1-V6
>> +    minItems: 1
>>      maxItems: 6
>>  
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: adi,hmc425a
>> +    then:
>> +      properties:
>> +        ctrl-gpios:
>> +          minItems: 6
> 
>> +          maxItems: 6
> 
> This one should not be needed, it's already set by constraints on the
> property above.
> 

No, not needed, just inspired from:
 /bindings/clock/samsung,exynos7-clock.yaml

Specifically, the top constraints:
  clocks:

    minItems: 1

    maxItems: 13

One of the conditional constraints:
  clocks:

    minItems: 13

    maxItems: 13


I would only have two arguments for this staying here:
 - It stays consistent with other cases
 - In the case a new device with more than 6 GPIOs is added, this would
need to be put back in