* [PATCH 0/2] Raydium RM692E5-based BOE panel driver
@ 2023-09-27 13:19 Konrad Dybcio
2023-09-27 13:19 ` [PATCH 1/2] dt-bindings: display: panel: Add Raydium RM692E5 Konrad Dybcio
2023-09-27 13:19 ` [PATCH 2/2] drm/panel: Add driver for BOE RM692E5 AMOLED panel Konrad Dybcio
0 siblings, 2 replies; 8+ messages in thread
From: Konrad Dybcio @ 2023-09-27 13:19 UTC (permalink / raw)
To: Neil Armstrong, Jessica Zhang, Sam Ravnborg, David Airlie,
Daniel Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Konrad Dybcio
Cc: Marijn Suijten, dri-devel, devicetree, linux-kernel,
Konrad Dybcio, Luca Weiss
The Fairphone 5 smartphone ships with a BOE AMOLED panel in conjunction
with a Raydium RM692E5 driver IC. This series adds the bindings and driver
for that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Konrad Dybcio (2):
dt-bindings: display: panel: Add Raydium RM692E5
drm/panel: Add driver for BOE RM692E5 AMOLED panel
.../bindings/display/panel/raydium,rm692e5.yaml | 73 +++
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-raydium-rm692e5.c | 496 +++++++++++++++++++++
4 files changed, 579 insertions(+)
---
base-commit: 18030226a48de1fbfabf4ae16aaa2695a484254f
change-id: 20230927-topic-fp5_disp-7671c009be18
Best regards,
--
Konrad Dybcio <konrad.dybcio@linaro.org>
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH 1/2] dt-bindings: display: panel: Add Raydium RM692E5 2023-09-27 13:19 [PATCH 0/2] Raydium RM692E5-based BOE panel driver Konrad Dybcio @ 2023-09-27 13:19 ` Konrad Dybcio 2023-09-28 17:09 ` Conor Dooley 2023-09-27 13:19 ` [PATCH 2/2] drm/panel: Add driver for BOE RM692E5 AMOLED panel Konrad Dybcio 1 sibling, 1 reply; 8+ messages in thread From: Konrad Dybcio @ 2023-09-27 13:19 UTC (permalink / raw) To: Neil Armstrong, Jessica Zhang, Sam Ravnborg, David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio Cc: Marijn Suijten, dri-devel, devicetree, linux-kernel, Konrad Dybcio Raydium RM692E5 is a display driver IC used to drive AMOLED DSI panels. Describe it. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../bindings/display/panel/raydium,rm692e5.yaml | 73 ++++++++++++++++++++++ 1 file changed, 73 insertions(+) diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml new file mode 100644 index 000000000000..423a85616c1c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/raydium,rm692e5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raydium RM692E5 based DSI display Panels + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: | + The Raydium RM692E5 is a generic DSI Panel IC used to control + AMOLED panels. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: fairphone,fp5-rm692e5-boe + - const: raydium,rm692e5 + + dvdd-supply: + description: Digital voltage rail + + vci-supply: + description: Analog voltage rail + + vddio-supply: + description: I/O voltage rail + + reg: true + port: true + +required: + - compatible + - reg + - reset-gpios + - dvdd-supply + - vci-supply + - vddio-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5"; + reg = <0>; + + reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; + dvdd-supply = <&vreg_oled_vci>; + vci-supply = <&vreg_l12c>; + vddio-supply = <&vreg_oled_dvdd>; + + port { + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + +... -- 2.42.0 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: display: panel: Add Raydium RM692E5 2023-09-27 13:19 ` [PATCH 1/2] dt-bindings: display: panel: Add Raydium RM692E5 Konrad Dybcio @ 2023-09-28 17:09 ` Conor Dooley 2023-09-28 17:24 ` Konrad Dybcio 0 siblings, 1 reply; 8+ messages in thread From: Conor Dooley @ 2023-09-28 17:09 UTC (permalink / raw) To: Konrad Dybcio Cc: Neil Armstrong, Jessica Zhang, Sam Ravnborg, David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio, Marijn Suijten, dri-devel, devicetree, linux-kernel [-- Attachment #1: Type: text/plain, Size: 2763 bytes --] On Wed, Sep 27, 2023 at 03:19:01PM +0200, Konrad Dybcio wrote: > Raydium RM692E5 is a display driver IC used to drive AMOLED DSI panels. > Describe it. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > .../bindings/display/panel/raydium,rm692e5.yaml | 73 ++++++++++++++++++++++ > 1 file changed, 73 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml > new file mode 100644 > index 000000000000..423a85616c1c > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml > @@ -0,0 +1,73 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/raydium,rm692e5.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Raydium RM692E5 based DSI display Panels The capitalisation here drives me crazy, but I can live with it... > + > +maintainers: > + - Konrad Dybcio <konradybcio@kernel.org> In case it's a typo, you sharing the d between first and surnames in your email addr? > + > +description: | This | should not be needed. Otherwise, this seems fine to me. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Thanks, Conor. > + The Raydium RM692E5 is a generic DSI Panel IC used to control > + AMOLED panels. > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + items: > + - const: fairphone,fp5-rm692e5-boe > + - const: raydium,rm692e5 > + > + dvdd-supply: > + description: Digital voltage rail > + > + vci-supply: > + description: Analog voltage rail > + > + vddio-supply: > + description: I/O voltage rail > + > + reg: true > + port: true > + > +required: > + - compatible > + - reg > + - reset-gpios > + - dvdd-supply > + - vci-supply > + - vddio-supply > + - port > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel@0 { > + compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5"; > + reg = <0>; > + > + reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; > + dvdd-supply = <&vreg_oled_vci>; > + vci-supply = <&vreg_l12c>; > + vddio-supply = <&vreg_oled_dvdd>; > + > + port { > + panel_in_0: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + }; > + }; > + > +... > > -- > 2.42.0 > [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: display: panel: Add Raydium RM692E5 2023-09-28 17:09 ` Conor Dooley @ 2023-09-28 17:24 ` Konrad Dybcio 0 siblings, 0 replies; 8+ messages in thread From: Konrad Dybcio @ 2023-09-28 17:24 UTC (permalink / raw) To: Conor Dooley Cc: Neil Armstrong, Jessica Zhang, Sam Ravnborg, David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio, Marijn Suijten, dri-devel, devicetree, linux-kernel On 28.09.2023 19:09, Conor Dooley wrote: > On Wed, Sep 27, 2023 at 03:19:01PM +0200, Konrad Dybcio wrote: >> Raydium RM692E5 is a display driver IC used to drive AMOLED DSI panels. >> Describe it. >> >> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> >> --- >> .../bindings/display/panel/raydium,rm692e5.yaml | 73 ++++++++++++++++++++++ >> 1 file changed, 73 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml >> new file mode 100644 >> index 000000000000..423a85616c1c >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml >> @@ -0,0 +1,73 @@ >> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/display/panel/raydium,rm692e5.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Raydium RM692E5 based DSI display Panels > > The capitalisation here drives me crazy, but I can live with it... Oh that's what I get for copypasting a different yaml as template :D willfix > >> + >> +maintainers: >> + - Konrad Dybcio <konradybcio@kernel.org> > > In case it's a typo, you sharing the d between first and surnames in > your email addr? Intentional design decision! > >> + >> +description: | > > This | should not be needed. Ack > > Otherwise, this seems fine to me. > Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Thanks! Konrad ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] drm/panel: Add driver for BOE RM692E5 AMOLED panel 2023-09-27 13:19 [PATCH 0/2] Raydium RM692E5-based BOE panel driver Konrad Dybcio 2023-09-27 13:19 ` [PATCH 1/2] dt-bindings: display: panel: Add Raydium RM692E5 Konrad Dybcio @ 2023-09-27 13:19 ` Konrad Dybcio 2023-09-28 22:00 ` Jessica Zhang 1 sibling, 1 reply; 8+ messages in thread From: Konrad Dybcio @ 2023-09-27 13:19 UTC (permalink / raw) To: Neil Armstrong, Jessica Zhang, Sam Ravnborg, David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio Cc: Marijn Suijten, dri-devel, devicetree, linux-kernel, Konrad Dybcio, Luca Weiss Add support for the 2700x1224 AMOLED BOE panel bundled with a RM692E5 driver IC, as found on the Fairphone 5 smartphone. Co-developed-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-raydium-rm692e5.c | 496 ++++++++++++++++++++++++++ 3 files changed, 506 insertions(+) diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 2d6d96ee3547..ecb22ea326cb 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -516,6 +516,15 @@ config DRM_PANEL_RAYDIUM_RM68200 Say Y here if you want to enable support for Raydium RM68200 720x1280 DSI video mode panel. +config DRM_PANEL_RAYDIUM_RM692E5 + tristate "Raydium RM692E5-based DSI panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Raydium RM692E5-based + display panels, such as the one found in the Fairphone 5 smartphone. + config DRM_PANEL_RONBO_RB070D30 tristate "Ronbo Electronics RB070D30 panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 157c77ff157f..e14ce55a0875 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o +obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM692E5) += panel-raydium-rm692e5.o obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20) += panel-samsung-atna33xc20.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o diff --git a/drivers/gpu/drm/panel/panel-raydium-rm692e5.c b/drivers/gpu/drm/panel/panel-raydium-rm692e5.c new file mode 100644 index 000000000000..bd753d1b12dd --- /dev/null +++ b/drivers/gpu/drm/panel/panel-raydium-rm692e5.c @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree. + * Copyright (c) 2023 Linaro Limited + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <drm/display/drm_dsc.h> +#include <drm/display/drm_dsc_helper.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +struct rm692e5_panel { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + struct drm_dsc_config dsc; + struct regulator_bulk_data supplies[3]; + struct gpio_desc *reset_gpio; + bool prepared; +}; + +static inline struct rm692e5_panel *to_rm692e5_panel(struct drm_panel *panel) +{ + return container_of(panel, struct rm692e5_panel, panel); +} + +static void rm692e5_reset(struct rm692e5_panel *ctx) +{ + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + usleep_range(10000, 11000); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + usleep_range(5000, 6000); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + usleep_range(10000, 11000); +} + +static int rm692e5_on(struct rm692e5_panel *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi; + struct device *dev = &dsi->dev; + int ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x41); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xd6, 0x00); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x16); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x8a, 0x87); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x71); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x82, 0x01); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xc6, 0x00); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xc7, 0x2c); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xc8, 0x64); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xc9, 0x3c); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xca, 0x80); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xcb, 0x02); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xcc, 0x02); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x38); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x18, 0x13); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xfe, 0xf4); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x00, 0xff); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x01, 0xff); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x02, 0xcf); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x03, 0xbc); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x04, 0xb9); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x05, 0x99); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x06, 0x02); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x07, 0x0a); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x08, 0xe0); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x09, 0x4c); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x0a, 0xeb); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x0b, 0xe8); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x0c, 0x32); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x0d, 0x07); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xfe, 0xf4); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x0d, 0xc0); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x0e, 0xff); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x0f, 0xff); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x10, 0x33); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x11, 0x6f); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x12, 0x6e); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x13, 0xa6); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x14, 0x80); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x15, 0x02); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x16, 0x38); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x17, 0xd3); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x18, 0x3a); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x19, 0xba); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x1a, 0xcc); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x1b, 0x01); + usleep_range(1000, 2000); + + ret = mipi_dsi_dcs_nop(dsi); + if (ret < 0) { + dev_err(dev, "Failed to nop: %d\n", ret); + return ret; + } + msleep(32); + + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x38); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x18, 0x13); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xfe, 0xd1); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xd3, 0x00); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xd0, 0x00); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xd2, 0x00); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xd4, 0x00); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xb4, 0x01); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xfe, 0xf9); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x00, 0xaf); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x1d, 0x37); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x44, 0x0a, 0x7b); + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x00); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xfa, 0x01); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0xc2, 0x08); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x35, 0x00); + usleep_range(1000, 2000); + mipi_dsi_generic_write_seq(dsi, 0x51, 0x05, 0x42); + usleep_range(1000, 2000); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to exit sleep mode: %d\n", ret); + return ret; + } + msleep(100); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display on: %d\n", ret); + return ret; + } + usleep_range(1000, 2000); + + return 0; +} + +static int rm692e5_off(struct rm692e5_panel *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi; + struct device *dev = &dsi->dev; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x00); + usleep_range(1000, 2000); + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display off: %d\n", ret); + return ret; + } + usleep_range(1000, 2000); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to enter sleep mode: %d\n", ret); + return ret; + } + msleep(100); + + return 0; +} + +static int rm692e5_prepare(struct drm_panel *panel) +{ + struct rm692e5_panel *ctx = to_rm692e5_panel(panel); + struct drm_dsc_picture_parameter_set pps; + struct device *dev = &ctx->dsi->dev; + int ret; + + if (ctx->prepared) + return 0; + + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + if (ret < 0) { + dev_err(dev, "Failed to enable regulators: %d\n", ret); + return ret; + } + + rm692e5_reset(ctx); + + ret = rm692e5_on(ctx); + if (ret < 0) { + dev_err(dev, "Failed to initialize panel: %d\n", ret); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + return ret; + } + + drm_dsc_pps_payload_pack(&pps, &ctx->dsc); + + ret = mipi_dsi_picture_parameter_set(ctx->dsi, &pps); + if (ret < 0) { + dev_err(panel->dev, "failed to transmit PPS: %d\n", ret); + return ret; + } + + ret = mipi_dsi_compression_mode(ctx->dsi, true); + if (ret < 0) { + dev_err(dev, "failed to enable compression mode: %d\n", ret); + return ret; + } + + msleep(28); + + mipi_dsi_generic_write_seq(ctx->dsi, 0xfe, 0x40); + usleep_range(1000, 2000); + + /* 0x05 -> 90Hz, 0x00 -> 60Hz */ + mipi_dsi_generic_write_seq(ctx->dsi, 0xbd, 0x05); + usleep_range(1000, 2000); + + mipi_dsi_generic_write_seq(ctx->dsi, 0xfe, 0x00); + usleep_range(1000, 2000); + + ctx->prepared = true; + + return 0; +} + +static int rm692e5_unprepare(struct drm_panel *panel) +{ + struct rm692e5_panel *ctx = to_rm692e5_panel(panel); + struct device *dev = &ctx->dsi->dev; + int ret; + + if (!ctx->prepared) + return 0; + + ret = rm692e5_off(ctx); + if (ret < 0) + dev_err(dev, "Failed to un-initialize panel: %d\n", ret); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + + ctx->prepared = false; + return 0; +} + +static const struct drm_display_mode rm692e5_mode = { + .clock = (1224 + 32 + 8 + 8) * (2700 + 8 + 2 + 8) * 90 / 1000, + .hdisplay = 1224, + .hsync_start = 1224 + 32, + .hsync_end = 1224 + 32 + 8, + .htotal = 1224 + 32 + 8 + 8, + .vdisplay = 2700, + .vsync_start = 2700 + 8, + .vsync_end = 2700 + 8 + 2, + .vtotal = 2700 + 8 + 2 + 8, + .width_mm = 68, + .height_mm = 150, +}; + +static int rm692e5_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &rm692e5_mode); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs rm692e5_panel_funcs = { + .prepare = rm692e5_prepare, + .unprepare = rm692e5_unprepare, + .get_modes = rm692e5_get_modes, +}; + +static int rm692e5_bl_update_status(struct backlight_device *bl) +{ + struct mipi_dsi_device *dsi = bl_get_data(bl); + u16 brightness = backlight_get_brightness(bl); + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness); + if (ret < 0) + return ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + return 0; +} + +static int rm692e5_bl_get_brightness(struct backlight_device *bl) +{ + struct mipi_dsi_device *dsi = bl_get_data(bl); + u16 brightness; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness); + if (ret < 0) + return ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + return brightness; +} + +static const struct backlight_ops rm692e5_bl_ops = { + .update_status = rm692e5_bl_update_status, + .get_brightness = rm692e5_bl_get_brightness, +}; + +static struct backlight_device * +rm692e5_create_backlight(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + const struct backlight_properties props = { + .type = BACKLIGHT_RAW, + .brightness = 4095, + .max_brightness = 4095, + }; + + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, + &rm692e5_bl_ops, &props); +} + +static int rm692e5_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct rm692e5_panel *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->supplies[0].supply = "vddio"; + ctx->supplies[1].supply = "dvdd"; + ctx->supplies[2].supply = "vci"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), + ctx->supplies); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to get regulators\n"); + + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ctx->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), + "Failed to get reset-gpios\n"); + + ctx->dsi = dsi; + mipi_dsi_set_drvdata(dsi, ctx); + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET | + MIPI_DSI_CLOCK_NON_CONTINUOUS; + + drm_panel_init(&ctx->panel, dev, &rm692e5_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + ctx->panel.prepare_prev_first = true; + + ctx->panel.backlight = rm692e5_create_backlight(dsi); + if (IS_ERR(ctx->panel.backlight)) + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight), + "Failed to create backlight\n"); + + drm_panel_add(&ctx->panel); + + /* This panel only supports DSC; unconditionally enable it */ + dsi->dsc = &ctx->dsc; + + /* TODO: Pass slice_per_pkt = 2 */ + ctx->dsc.dsc_version_major = 1; + ctx->dsc.dsc_version_minor = 1; + ctx->dsc.slice_height = 60; + ctx->dsc.slice_width = 1224; + + WARN_ON(1224 % ctx->dsc.slice_width); + ctx->dsc.slice_count = 1224 / ctx->dsc.slice_width; + ctx->dsc.bits_per_component = 8; + ctx->dsc.bits_per_pixel = 8 << 4; /* 4 fractional bits */ + ctx->dsc.block_pred_enable = true; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(dev, "Failed to attach to DSI host: %d\n", ret); + drm_panel_remove(&ctx->panel); + return ret; + } + + return 0; +} + +static void rm692e5_remove(struct mipi_dsi_device *dsi) +{ + struct rm692e5_panel *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); + + drm_panel_remove(&ctx->panel); +} + +static const struct of_device_id rm692e5_of_match[] = { + { .compatible = "fairphone,fp5-rm692e5-boe" }, + { } +}; +MODULE_DEVICE_TABLE(of, rm692e5_of_match); + +static struct mipi_dsi_driver rm692e5_driver = { + .probe = rm692e5_probe, + .remove = rm692e5_remove, + .driver = { + .name = "panel-rm692e5-boe-amoled", + .of_match_table = rm692e5_of_match, + }, +}; +module_mipi_dsi_driver(rm692e5_driver); + +MODULE_DESCRIPTION("DRM driver for rm692e5-equipped DSI panels"); +MODULE_LICENSE("GPL"); -- 2.42.0 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] drm/panel: Add driver for BOE RM692E5 AMOLED panel 2023-09-27 13:19 ` [PATCH 2/2] drm/panel: Add driver for BOE RM692E5 AMOLED panel Konrad Dybcio @ 2023-09-28 22:00 ` Jessica Zhang 2023-09-29 0:02 ` Konrad Dybcio 0 siblings, 1 reply; 8+ messages in thread From: Jessica Zhang @ 2023-09-28 22:00 UTC (permalink / raw) To: Konrad Dybcio, Neil Armstrong, Sam Ravnborg, David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio Cc: Marijn Suijten, dri-devel, devicetree, linux-kernel, Luca Weiss Hi Konrad, On 9/27/2023 6:19 AM, Konrad Dybcio wrote: > Add support for the 2700x1224 AMOLED BOE panel bundled with a RM692E5 > driver IC, as found on the Fairphone 5 smartphone. > > Co-developed-by: Luca Weiss <luca.weiss@fairphone.com> > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > drivers/gpu/drm/panel/Kconfig | 9 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-raydium-rm692e5.c | 496 ++++++++++++++++++++++++++ > 3 files changed, 506 insertions(+) > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 2d6d96ee3547..ecb22ea326cb 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -516,6 +516,15 @@ config DRM_PANEL_RAYDIUM_RM68200 > Say Y here if you want to enable support for Raydium RM68200 > 720x1280 DSI video mode panel. > > +config DRM_PANEL_RAYDIUM_RM692E5 > + tristate "Raydium RM692E5-based DSI panel" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y here if you want to enable support for Raydium RM692E5-based > + display panels, such as the one found in the Fairphone 5 smartphone. > + > config DRM_PANEL_RONBO_RB070D30 > tristate "Ronbo Electronics RB070D30 panel" > depends on OF > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index 157c77ff157f..e14ce55a0875 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -49,6 +49,7 @@ obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o > obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o > obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o > obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o > +obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM692E5) += panel-raydium-rm692e5.o > obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20) += panel-samsung-atna33xc20.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o > diff --git a/drivers/gpu/drm/panel/panel-raydium-rm692e5.c b/drivers/gpu/drm/panel/panel-raydium-rm692e5.c > new file mode 100644 > index 000000000000..bd753d1b12dd > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-raydium-rm692e5.c > @@ -0,0 +1,496 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree. > + * Copyright (c) 2023 Linaro Limited > + */ > + > +#include <linux/backlight.h> > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/regulator/consumer.h> > + > +#include <drm/display/drm_dsc.h> > +#include <drm/display/drm_dsc_helper.h> > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_modes.h> > +#include <drm/drm_panel.h> > + > +struct rm692e5_panel { > + struct drm_panel panel; > + struct mipi_dsi_device *dsi; > + struct drm_dsc_config dsc; > + struct regulator_bulk_data supplies[3]; > + struct gpio_desc *reset_gpio; > + bool prepared; > +}; > + > +static inline struct rm692e5_panel *to_rm692e5_panel(struct drm_panel *panel) > +{ > + return container_of(panel, struct rm692e5_panel, panel); > +} > + > +static void rm692e5_reset(struct rm692e5_panel *ctx) > +{ > + gpiod_set_value_cansleep(ctx->reset_gpio, 0); > + usleep_range(10000, 11000); > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + usleep_range(5000, 6000); > + gpiod_set_value_cansleep(ctx->reset_gpio, 0); > + usleep_range(10000, 11000); > +} > + > +static int rm692e5_on(struct rm692e5_panel *ctx) > +{ > + struct mipi_dsi_device *dsi = ctx->dsi; > + struct device *dev = &dsi->dev; > + int ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x41); > + usleep_range(1000, 2000); I'm not familiar with this panel, but is calling usleep() after almost every single DCS command necessary or specified by the spec? > + mipi_dsi_generic_write_seq(dsi, 0xd6, 0x00); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x16); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x8a, 0x87); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x71); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x82, 0x01); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xc6, 0x00); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xc7, 0x2c); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xc8, 0x64); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xc9, 0x3c); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xca, 0x80); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xcb, 0x02); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xcc, 0x02); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x38); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x18, 0x13); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xfe, 0xf4); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x00, 0xff); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x01, 0xff); Are these generic DCS commands? If so, can you use the MIPI_DCS_* command macros/helpers when applicable? > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x02, 0xcf); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x03, 0xbc); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x04, 0xb9); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x05, 0x99); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x06, 0x02); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x07, 0x0a); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x08, 0xe0); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x09, 0x4c); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x0a, 0xeb); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x0b, 0xe8); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x0c, 0x32); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x0d, 0x07); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xfe, 0xf4); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x0d, 0xc0); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x0e, 0xff); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x0f, 0xff); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x10, 0x33); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x11, 0x6f); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x12, 0x6e); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x13, 0xa6); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x14, 0x80); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x15, 0x02); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x16, 0x38); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x17, 0xd3); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x18, 0x3a); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x19, 0xba); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x1a, 0xcc); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x1b, 0x01); > + usleep_range(1000, 2000); > + > + ret = mipi_dsi_dcs_nop(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to nop: %d\n", ret); > + return ret; > + } > + msleep(32); > + > + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x38); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x18, 0x13); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xfe, 0xd1); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xd3, 0x00); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xd0, 0x00); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xd2, 0x00); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xd4, 0x00); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xb4, 0x01); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xfe, 0xf9); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x00, 0xaf); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x1d, 0x37); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x44, 0x0a, 0x7b); > + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x00); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xfa, 0x01); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0xc2, 0x08); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x35, 0x00); > + usleep_range(1000, 2000); > + mipi_dsi_generic_write_seq(dsi, 0x51, 0x05, 0x42); > + usleep_range(1000, 2000); > + > + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to exit sleep mode: %d\n", ret); > + return ret; > + } > + msleep(100); > + > + ret = mipi_dsi_dcs_set_display_on(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to set display on: %d\n", ret); > + return ret; > + } > + usleep_range(1000, 2000); > + > + return 0; > +} > + > +static int rm692e5_off(struct rm692e5_panel *ctx) > +{ > + struct mipi_dsi_device *dsi = ctx->dsi; > + struct device *dev = &dsi->dev; > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x00); > + usleep_range(1000, 2000); > + > + ret = mipi_dsi_dcs_set_display_off(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to set display off: %d\n", ret); > + return ret; > + } > + usleep_range(1000, 2000); > + > + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to enter sleep mode: %d\n", ret); > + return ret; > + } > + msleep(100); > + > + return 0; > +} > + > +static int rm692e5_prepare(struct drm_panel *panel) > +{ > + struct rm692e5_panel *ctx = to_rm692e5_panel(panel); > + struct drm_dsc_picture_parameter_set pps; > + struct device *dev = &ctx->dsi->dev; > + int ret; > + > + if (ctx->prepared) > + return 0; > + > + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + if (ret < 0) { > + dev_err(dev, "Failed to enable regulators: %d\n", ret); > + return ret; > + } > + > + rm692e5_reset(ctx); > + > + ret = rm692e5_on(ctx); > + if (ret < 0) { > + dev_err(dev, "Failed to initialize panel: %d\n", ret); > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + return ret; > + } > + > + drm_dsc_pps_payload_pack(&pps, &ctx->dsc); > + > + ret = mipi_dsi_picture_parameter_set(ctx->dsi, &pps); > + if (ret < 0) { > + dev_err(panel->dev, "failed to transmit PPS: %d\n", ret); > + return ret; > + } > + > + ret = mipi_dsi_compression_mode(ctx->dsi, true); > + if (ret < 0) { > + dev_err(dev, "failed to enable compression mode: %d\n", ret); > + return ret; > + } > + > + msleep(28); > + > + mipi_dsi_generic_write_seq(ctx->dsi, 0xfe, 0x40); > + usleep_range(1000, 2000); > + > + /* 0x05 -> 90Hz, 0x00 -> 60Hz */ > + mipi_dsi_generic_write_seq(ctx->dsi, 0xbd, 0x05); > + usleep_range(1000, 2000); Just to check my understanding of the comment here.. so the above DCS command will set the panel to 90Hz, and if we change the parameter to 0x00, it will be set to 60Hz instead? Thanks, Jessica Zhang > + > + mipi_dsi_generic_write_seq(ctx->dsi, 0xfe, 0x00); > + usleep_range(1000, 2000); > + > + ctx->prepared = true; > + > + return 0; > +} > + > +static int rm692e5_unprepare(struct drm_panel *panel) > +{ > + struct rm692e5_panel *ctx = to_rm692e5_panel(panel); > + struct device *dev = &ctx->dsi->dev; > + int ret; > + > + if (!ctx->prepared) > + return 0; > + > + ret = rm692e5_off(ctx); > + if (ret < 0) > + dev_err(dev, "Failed to un-initialize panel: %d\n", ret); > + > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + > + ctx->prepared = false; > + return 0; > +} > + > +static const struct drm_display_mode rm692e5_mode = { > + .clock = (1224 + 32 + 8 + 8) * (2700 + 8 + 2 + 8) * 90 / 1000, > + .hdisplay = 1224, > + .hsync_start = 1224 + 32, > + .hsync_end = 1224 + 32 + 8, > + .htotal = 1224 + 32 + 8 + 8, > + .vdisplay = 2700, > + .vsync_start = 2700 + 8, > + .vsync_end = 2700 + 8 + 2, > + .vtotal = 2700 + 8 + 2 + 8, > + .width_mm = 68, > + .height_mm = 150, > +}; > + > +static int rm692e5_get_modes(struct drm_panel *panel, > + struct drm_connector *connector) > +{ > + struct drm_display_mode *mode; > + > + mode = drm_mode_duplicate(connector->dev, &rm692e5_mode); > + if (!mode) > + return -ENOMEM; > + > + drm_mode_set_name(mode); > + > + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; > + connector->display_info.width_mm = mode->width_mm; > + connector->display_info.height_mm = mode->height_mm; > + drm_mode_probed_add(connector, mode); > + > + return 1; > +} > + > +static const struct drm_panel_funcs rm692e5_panel_funcs = { > + .prepare = rm692e5_prepare, > + .unprepare = rm692e5_unprepare, > + .get_modes = rm692e5_get_modes, > +}; > + > +static int rm692e5_bl_update_status(struct backlight_device *bl) > +{ > + struct mipi_dsi_device *dsi = bl_get_data(bl); > + u16 brightness = backlight_get_brightness(bl); > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness); > + if (ret < 0) > + return ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + return 0; > +} > + > +static int rm692e5_bl_get_brightness(struct backlight_device *bl) > +{ > + struct mipi_dsi_device *dsi = bl_get_data(bl); > + u16 brightness; > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness); > + if (ret < 0) > + return ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + return brightness; > +} > + > +static const struct backlight_ops rm692e5_bl_ops = { > + .update_status = rm692e5_bl_update_status, > + .get_brightness = rm692e5_bl_get_brightness, > +}; > + > +static struct backlight_device * > +rm692e5_create_backlight(struct mipi_dsi_device *dsi) > +{ > + struct device *dev = &dsi->dev; > + const struct backlight_properties props = { > + .type = BACKLIGHT_RAW, > + .brightness = 4095, > + .max_brightness = 4095, > + }; > + > + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, > + &rm692e5_bl_ops, &props); > +} > + > +static int rm692e5_probe(struct mipi_dsi_device *dsi) > +{ > + struct device *dev = &dsi->dev; > + struct rm692e5_panel *ctx; > + int ret; > + > + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); > + if (!ctx) > + return -ENOMEM; > + > + ctx->supplies[0].supply = "vddio"; > + ctx->supplies[1].supply = "dvdd"; > + ctx->supplies[2].supply = "vci"; > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), > + ctx->supplies); > + if (ret < 0) > + return dev_err_probe(dev, ret, "Failed to get regulators\n"); > + > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(ctx->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), > + "Failed to get reset-gpios\n"); > + > + ctx->dsi = dsi; > + mipi_dsi_set_drvdata(dsi, ctx); > + > + dsi->lanes = 4; > + dsi->format = MIPI_DSI_FMT_RGB888; > + dsi->mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET | > + MIPI_DSI_CLOCK_NON_CONTINUOUS; > + > + drm_panel_init(&ctx->panel, dev, &rm692e5_panel_funcs, > + DRM_MODE_CONNECTOR_DSI); > + ctx->panel.prepare_prev_first = true; > + > + ctx->panel.backlight = rm692e5_create_backlight(dsi); > + if (IS_ERR(ctx->panel.backlight)) > + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight), > + "Failed to create backlight\n"); > + > + drm_panel_add(&ctx->panel); > + > + /* This panel only supports DSC; unconditionally enable it */ > + dsi->dsc = &ctx->dsc; > + > + /* TODO: Pass slice_per_pkt = 2 */ > + ctx->dsc.dsc_version_major = 1; > + ctx->dsc.dsc_version_minor = 1; > + ctx->dsc.slice_height = 60; > + ctx->dsc.slice_width = 1224; > + > + WARN_ON(1224 % ctx->dsc.slice_width); > + ctx->dsc.slice_count = 1224 / ctx->dsc.slice_width; > + ctx->dsc.bits_per_component = 8; > + ctx->dsc.bits_per_pixel = 8 << 4; /* 4 fractional bits */ > + ctx->dsc.block_pred_enable = true; > + > + ret = mipi_dsi_attach(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to attach to DSI host: %d\n", ret); > + drm_panel_remove(&ctx->panel); > + return ret; > + } > + > + return 0; > +} > + > +static void rm692e5_remove(struct mipi_dsi_device *dsi) > +{ > + struct rm692e5_panel *ctx = mipi_dsi_get_drvdata(dsi); > + int ret; > + > + ret = mipi_dsi_detach(dsi); > + if (ret < 0) > + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); > + > + drm_panel_remove(&ctx->panel); > +} > + > +static const struct of_device_id rm692e5_of_match[] = { > + { .compatible = "fairphone,fp5-rm692e5-boe" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, rm692e5_of_match); > + > +static struct mipi_dsi_driver rm692e5_driver = { > + .probe = rm692e5_probe, > + .remove = rm692e5_remove, > + .driver = { > + .name = "panel-rm692e5-boe-amoled", > + .of_match_table = rm692e5_of_match, > + }, > +}; > +module_mipi_dsi_driver(rm692e5_driver); > + > +MODULE_DESCRIPTION("DRM driver for rm692e5-equipped DSI panels"); > +MODULE_LICENSE("GPL"); > > -- > 2.42.0 > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] drm/panel: Add driver for BOE RM692E5 AMOLED panel 2023-09-28 22:00 ` Jessica Zhang @ 2023-09-29 0:02 ` Konrad Dybcio 2023-09-29 4:03 ` Neil Armstrong 0 siblings, 1 reply; 8+ messages in thread From: Konrad Dybcio @ 2023-09-29 0:02 UTC (permalink / raw) To: Jessica Zhang, Neil Armstrong, Sam Ravnborg, David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio Cc: Marijn Suijten, dri-devel, devicetree, linux-kernel, Luca Weiss On 29.09.2023 00:00, Jessica Zhang wrote: > Hi Konrad, > > On 9/27/2023 6:19 AM, Konrad Dybcio wrote: >> Add support for the 2700x1224 AMOLED BOE panel bundled with a RM692E5 >> driver IC, as found on the Fairphone 5 smartphone. >> >> Co-developed-by: Luca Weiss <luca.weiss@fairphone.com> >> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> >> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> >> --- [...] >> +static int rm692e5_on(struct rm692e5_panel *ctx) >> +{ >> + struct mipi_dsi_device *dsi = ctx->dsi; >> + struct device *dev = &dsi->dev; >> + int ret; >> + >> + dsi->mode_flags |= MIPI_DSI_MODE_LPM; >> + >> + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x41); >> + usleep_range(1000, 2000); > > I'm not familiar with this panel, but is calling usleep() after almost every single DCS command necessary or specified by the spec? Removing them doesn't seem to cause adverse effects, so I'm willing to do that :) [...] > Are these generic DCS commands? If so, can you use the MIPI_DCS_* command macros/helpers when applicable? Unfortunately, it doesn't seem so. [...] > Just to check my understanding of the comment here.. so the above DCS command will set the panel to 90Hz, and if we change the parameter to 0x00, it will be set to 60Hz instead? Yes. Since the commands differ, I was reluctant to introduce a second, identical-except-60hz mode for now. Though I can define a driver-specific struct like this: struct rm69e25_panel_desc { drm_display_mode drm_mode; u8 framerate_magic; }; and then define both a 60 and a 90 mode. I also moved DCS calls from .unprepare to .disable so that they are not sent to a DSI host that's powered off and will include that in v2. LMK if you have more comments. Konrad ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] drm/panel: Add driver for BOE RM692E5 AMOLED panel 2023-09-29 0:02 ` Konrad Dybcio @ 2023-09-29 4:03 ` Neil Armstrong 0 siblings, 0 replies; 8+ messages in thread From: Neil Armstrong @ 2023-09-29 4:03 UTC (permalink / raw) To: Konrad Dybcio, Jessica Zhang, Sam Ravnborg, David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio Cc: Marijn Suijten, dri-devel, devicetree, linux-kernel, Luca Weiss Le 29/09/2023 à 02:02, Konrad Dybcio a écrit : > On 29.09.2023 00:00, Jessica Zhang wrote: >> Hi Konrad, >> >> On 9/27/2023 6:19 AM, Konrad Dybcio wrote: >>> Add support for the 2700x1224 AMOLED BOE panel bundled with a RM692E5 >>> driver IC, as found on the Fairphone 5 smartphone. >>> >>> Co-developed-by: Luca Weiss <luca.weiss@fairphone.com> >>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> >>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> >>> --- > [...] > >>> +static int rm692e5_on(struct rm692e5_panel *ctx) >>> +{ >>> + struct mipi_dsi_device *dsi = ctx->dsi; >>> + struct device *dev = &dsi->dev; >>> + int ret; >>> + >>> + dsi->mode_flags |= MIPI_DSI_MODE_LPM; >>> + >>> + mipi_dsi_generic_write_seq(dsi, 0xfe, 0x41); >>> + usleep_range(1000, 2000); >> >> I'm not familiar with this panel, but is calling usleep() after almost every single DCS command necessary or specified by the spec? > Removing them doesn't seem to cause adverse effects, so I'm willing to > do that :) > > [...] > >> Are these generic DCS commands? If so, can you use the MIPI_DCS_* command macros/helpers when applicable? > Unfortunately, it doesn't seem so. > > [...] > >> Just to check my understanding of the comment here.. so the above DCS command will set the panel to 90Hz, and if we change the parameter to 0x00, it will be set to 60Hz instead? > Yes. Since the commands differ, I was reluctant to introduce > a second, identical-except-60hz mode for now. Though I can > define a driver-specific struct like this: > > struct rm69e25_panel_desc { > drm_display_mode drm_mode; > u8 framerate_magic; > }; > > and then define both a 60 and a 90 mode. > > > I also moved DCS calls from .unprepare to .disable so that they > are not sent to a DSI host that's powered off and will include > that in v2. LMK if you have more comments. Those changes would be great, Thanks, Neil > > Konrad ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2023-09-29 4:03 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2023-09-27 13:19 [PATCH 0/2] Raydium RM692E5-based BOE panel driver Konrad Dybcio 2023-09-27 13:19 ` [PATCH 1/2] dt-bindings: display: panel: Add Raydium RM692E5 Konrad Dybcio 2023-09-28 17:09 ` Conor Dooley 2023-09-28 17:24 ` Konrad Dybcio 2023-09-27 13:19 ` [PATCH 2/2] drm/panel: Add driver for BOE RM692E5 AMOLED panel Konrad Dybcio 2023-09-28 22:00 ` Jessica Zhang 2023-09-29 0:02 ` Konrad Dybcio 2023-09-29 4:03 ` Neil Armstrong
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).