[PATCH v2 0/6] support oneplus-lemonade(p) devices

[PATCH v2 0/6] support oneplus-lemonade(p) devices

[Nia Espera]

Patch series adding support for oneplus-lemonade and oneplus-lemonadep
devices (OnePlus 9 & 9 Pro), along with a few needed fixups. Currently
working as of this series:

- USB OTG
- UFS
- Framebuffer display
- Touchscreen (for lemonade)
- Power & volume down keys
- Battery reading
- Modem, IPA, and remoteproc bringup

Signed-off-by: Nia Espera <nespera@igalia.com>
---
Changes in v2:
- Fixed up formatting/style.
- Removed unused pinctrl nodes.
- Removed unused properties.
- Moved ADC7 defines to vadc header.
- Edited copyright on lemonade dts and license on spmi header.
- Fixed up therm channels.
- Removed unnecessary hack w.r.t. timer node.
- Link to v1: https://lore.kernel.org/r/20231016-nia-sm8350-for-upstream-v1-0-bb557a0af2e9@igalia.com

---
Nia Espera (6):
      iio: adc: add smb139x bindings
      arm64: dts: qcom: sm8350: Fix DMA0 address
      arm64: dts: qcom: pm8350k: remove hanging whitespace
      arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
      dt-bindings: arm: qcom: add oneplus-lemonade(p) bindings
      arm64: dts: qcom: sm8350-lemonade(p): new devices

 Documentation/devicetree/bindings/arm/qcom.yaml    |    2 +
 arch/arm64/boot/dts/qcom/Makefile                  |    2 +
 arch/arm64/boot/dts/qcom/pmk8350.dtsi              |    2 +-
 .../arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi | 1042 ++++++++++++++++++++
 .../boot/dts/qcom/sm8350-oneplus-lemonade.dts      |   85 ++
 .../boot/dts/qcom/sm8350-oneplus-lemonadep.dts     |   20 +
 arch/arm64/boot/dts/qcom/sm8350.dtsi               |   12 +-
 include/dt-bindings/iio/qcom,spmi-adc7-smb139x.h   |   19 +
 include/dt-bindings/iio/qcom,spmi-vadc.h           |    3 +
 9 files changed, 1180 insertions(+), 7 deletions(-)
---
base-commit: 58720809f52779dc0f08e53e54b014209d13eebb
change-id: 20231016-nia-sm8350-for-upstream-2f452366e421

Best regards,
-- 
Nia Espera <nespera@igalia.com>

[PATCH v2 1/6] iio: adc: add smb139x bindings

[Nia Espera]

Bindings for a charger controller chip found on sm8350

Signed-off-by: Nia Espera <nespera@igalia.com>
---
 include/dt-bindings/iio/qcom,spmi-adc7-smb139x.h | 19 +++++++++++++++++++
 include/dt-bindings/iio/qcom,spmi-vadc.h         |  3 +++
 2 files changed, 22 insertions(+)

diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-smb139x.h b/include/dt-bindings/iio/qcom,spmi-adc7-smb139x.h
new file mode 100644
index 000000000000..c0680d1285cf
--- /dev/null
+++ b/include/dt-bindings/iio/qcom,spmi-adc7-smb139x.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause */
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_SMB139X_H
+#define _DT_BINDINGS_QCOM_SPMI_VADC_SMB139X_H
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+#define SMB139x_1_ADC7_SMB_TEMP			(SMB139x_1_SID << 8 | ADC7_SMB_TEMP)
+#define SMB139x_1_ADC7_ICHG_SMB			(SMB139x_1_SID << 8 | ADC7_ICHG_SMB)
+#define SMB139x_1_ADC7_IIN_SMB			(SMB139x_1_SID << 8 | ADC7_IIN_SMB)
+
+#define SMB139x_2_ADC7_SMB_TEMP			(SMB139x_2_SID << 8 | ADC7_SMB_TEMP)
+#define SMB139x_2_ADC7_ICHG_SMB			(SMB139x_2_SID << 8 | ADC7_ICHG_SMB)
+#define SMB139x_2_ADC7_IIN_SMB			(SMB139x_2_SID << 8 | ADC7_IIN_SMB)
+
+#endif
diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h
index 08adfe25964c..ef07ecd4d585 100644
--- a/include/dt-bindings/iio/qcom,spmi-vadc.h
+++ b/include/dt-bindings/iio/qcom,spmi-vadc.h
@@ -239,12 +239,15 @@
 #define ADC7_GPIO3				0x0c
 #define ADC7_GPIO4				0x0d
 
+#define ADC7_SMB_TEMP				0x06
 #define ADC7_CHG_TEMP				0x10
 #define ADC7_USB_IN_V_16			0x11
 #define ADC7_VDC_16				0x12
 #define ADC7_CC1_ID				0x13
 #define ADC7_VREF_BAT_THERM			0x15
 #define ADC7_IIN_FB				0x17
+#define ADC7_ICHG_SMB				0x18
+#define ADC7_IIN_SMB				0x19
 
 /* 30k pull-up1 */
 #define ADC7_AMUX_THM1_30K_PU			0x24

-- 
2.42.0

Re: [PATCH v2 1/6] iio: adc: add smb139x bindings

[Krzysztof Kozlowski]

On 18/10/2023 16:25, Nia Espera wrote:
> Bindings for a charger controller chip found on sm8350
> 
> Signed-off-by: Nia Espera <nespera@igalia.com>

Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching.

Best regards,
Krzysztof

[PATCH v2 2/6] arm64: dts: qcom: sm8350: Fix DMA0 address

[Nia Espera]

DMA0 node downstream is specified at 0x900000, so fix the typo. Without
this, enabling any i2c node using DMA0 causes a hang.

Fixes: bc08fbf49bc8 ("arm64: dts: qcom: sm8350: Define GPI DMA engines")
Fixes: 41d6bca799b3 ("arm64: dts: qcom: sm8350: correct DMA controller unit address")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nia Espera <nespera@igalia.com>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 00604bf7724f..6d12066389fa 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -918,9 +918,9 @@ spi19: spi@894000 {
 			};
 		};
 
-		gpi_dma0: dma-controller@9800000 {
+		gpi_dma0: dma-controller@900000 {
 			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
-			reg = <0 0x09800000 0 0x60000>;
+			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,

-- 
2.42.0

[PATCH v2 3/6] arm64: dts: qcom: pm8350k: remove hanging whitespace

[Nia Espera]

pmk8350 has a random tab character inserted, so remove it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nia Espera <nespera@igalia.com>
---
 arch/arm64/boot/dts/qcom/pmk8350.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 1eb74017062d..f0ed15458dd7 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -22,7 +22,7 @@ reboot-mode {
 		mode-bootloader = <0x02>;
 	};
 };
-	
+
 &spmi_bus {
 	pmk8350: pmic@PMK8350_SID {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";

-- 
2.42.0

[PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type

[Nia Espera]

In a similar vein to
https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasivam@linaro.org/,
the remote processors on sm8350 fail to initialize with the 'correct'
(i.e., specified in downstream) IRQ type. Change this to EDGE_RISING.

Signed-off-by: Nia Espera <nespera@igalia.com>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 6d12066389fa..7d5ea338a870 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2020,7 +2020,7 @@ mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8350-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2062,7 +2062,7 @@ slpi: remoteproc@5c00000 {
 			compatible = "qcom,sm8350-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3206,7 +3206,7 @@ adsp: remoteproc@17300000 {
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3511,7 +3511,7 @@ cdsp: remoteproc@98900000 {
 			compatible = "qcom,sm8350-cdsp-pas";
 			reg = <0 0x98900000 0 0x1400000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,

-- 
2.42.0

Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type

[Konrad Dybcio]

On 10/18/23 16:25, Nia Espera wrote:
> In a similar vein to
> https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasivam@linaro.org/,
> the remote processors on sm8350 fail to initialize with the 'correct'
> (i.e., specified in downstream) IRQ type. Change this to EDGE_RISING.
> 
> Signed-off-by: Nia Espera <nespera@igalia.com>
> ---
Hm, apparently 8250 and 7180 have the same thing.

Mani, could you elaborate on this?

Konrad

Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type

[Luca Weiss]

On Mittwoch, 18. Oktober 2023 22:17:15 CEST Konrad Dybcio wrote:
> On 10/18/23 16:25, Nia Espera wrote:
> > In a similar vein to
> > https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasivam@
> > linaro.org/, the remote processors on sm8350 fail to initialize with the
> > 'correct' (i.e., specified in downstream) IRQ type. Change this to
> > EDGE_RISING.
> > 
> > Signed-off-by: Nia Espera <nespera@igalia.com>
> > ---
> 
> Hm, apparently 8250 and 7180 have the same thing.
> 
> Mani, could you elaborate on this?
> 
> Konrad

I'm also carrying something like this for my sm6350 and sc7280 trees.

I tried getting some clarification in the lkml thread linked above about what 
should be done but never got a response.

Regards
Luca

Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type

[Manivannan Sadhasivam]

On Wed, Oct 18, 2023 at 10:17:15PM +0200, Konrad Dybcio wrote:
> 
> 
> On 10/18/23 16:25, Nia Espera wrote:
> > In a similar vein to
> > https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasivam@linaro.org/,
> > the remote processors on sm8350 fail to initialize with the 'correct'
> > (i.e., specified in downstream) IRQ type. Change this to EDGE_RISING.
> > 
> > Signed-off-by: Nia Espera <nespera@igalia.com>
> > ---
> Hm, apparently 8250 and 7180 have the same thing.
> 
> Mani, could you elaborate on this?
> 

So the remoteproc driver expects the wdog interrupts to be edge triggered as the
rest of the interrupts, but DT specifies them as level triggered. This won't
cause any issue during the first instance of the probe as the driver requested
trigger will be given precedence. But if the probe defers for some reason and
during the next try, request_irq() will fail with error similar to below:

irq: type mismatch, failed to map hwirq-x for interrupt-controller@xxxxxx!

This error is often confusing and I tried to fix it. But Maz didn't agree with
me, so I just ended up fixing the DTs for some platform I have access to.

So ideally, DTs of all platforms should be fixed to pass correct trigger type.

- Mani

> Konrad

-- 
மணிவண்ணன் சதாசிவம்

Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type

[Konrad Dybcio]

On 10/19/23 06:06, Manivannan Sadhasivam wrote:
> On Wed, Oct 18, 2023 at 10:17:15PM +0200, Konrad Dybcio wrote:
>>
>>
>> On 10/18/23 16:25, Nia Espera wrote:
>>> In a similar vein to
>>> https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasivam@linaro.org/,
>>> the remote processors on sm8350 fail to initialize with the 'correct'
>>> (i.e., specified in downstream) IRQ type. Change this to EDGE_RISING.
>>>
>>> Signed-off-by: Nia Espera <nespera@igalia.com>
>>> ---
>> Hm, apparently 8250 and 7180 have the same thing.
>>
>> Mani, could you elaborate on this?
>>
> 
> So the remoteproc driver expects the wdog interrupts to be edge triggered as the
> rest of the interrupts, but DT specifies them as level triggered. This won't
> cause any issue during the first instance of the probe as the driver requested
> trigger will be given precedence. But if the probe defers for some reason and
> during the next try, request_irq() will fail with error similar to below:
> 
> irq: type mismatch, failed to map hwirq-x for interrupt-controller@xxxxxx!
> 
> This error is often confusing and I tried to fix it. But Maz didn't agree with
> me, so I just ended up fixing the DTs for some platform I have access to.
> 
> So ideally, DTs of all platforms should be fixed to pass correct trigger type.
So, this should be edge for all platforms, correct?

Konrad

Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type

[Luca Weiss]

On Samstag, 21. Oktober 2023 19:44:20 CEST Konrad Dybcio wrote:
> On 10/19/23 06:06, Manivannan Sadhasivam wrote:
> > On Wed, Oct 18, 2023 at 10:17:15PM +0200, Konrad Dybcio wrote:
> >> On 10/18/23 16:25, Nia Espera wrote:
> >>> In a similar vein to
> >>> https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasiva
> >>> m@linaro.org/, the remote processors on sm8350 fail to initialize with
> >>> the 'correct' (i.e., specified in downstream) IRQ type. Change this to
> >>> EDGE_RISING.
> >>> 
> >>> Signed-off-by: Nia Espera <nespera@igalia.com>
> >>> ---
> >> 
> >> Hm, apparently 8250 and 7180 have the same thing.
> >> 
> >> Mani, could you elaborate on this?
> > 
> > So the remoteproc driver expects the wdog interrupts to be edge triggered
> > as the rest of the interrupts, but DT specifies them as level triggered.
> > This won't cause any issue during the first instance of the probe as the
> > driver requested trigger will be given precedence. But if the probe
> > defers for some reason and during the next try, request_irq() will fail
> > with error similar to below:
> > 
> > irq: type mismatch, failed to map hwirq-x for interrupt-controller@xxxxxx!
> > 
> > This error is often confusing and I tried to fix it. But Maz didn't agree
> > with me, so I just ended up fixing the DTs for some platform I have
> > access to.
> > 
> > So ideally, DTs of all platforms should be fixed to pass correct trigger
> > type.
> So, this should be edge for all platforms, correct?

I'd believe so, iirc when I looked at the driver it always requests that
interrupt type.

For reference, these are my patches:

sm6350:
https://github.com/z3ntu/linux/commit/0522b7a1b981d80884a785c7e654bb5094ea1bc2

sc7280:
https://github.com/z3ntu/linux/commit/ead1d7b8f5648535b857cfa9250aac2480f00ed3

> 
> Konrad

Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type

[Konrad Dybcio]

On 21.10.2023 21:34, Luca Weiss wrote:
> On Samstag, 21. Oktober 2023 19:44:20 CEST Konrad Dybcio wrote:
>> On 10/19/23 06:06, Manivannan Sadhasivam wrote:
>>> On Wed, Oct 18, 2023 at 10:17:15PM +0200, Konrad Dybcio wrote:
>>>> On 10/18/23 16:25, Nia Espera wrote:
>>>>> In a similar vein to
>>>>> https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasiva
>>>>> m@linaro.org/, the remote processors on sm8350 fail to initialize with
>>>>> the 'correct' (i.e., specified in downstream) IRQ type. Change this to
>>>>> EDGE_RISING.
>>>>>
>>>>> Signed-off-by: Nia Espera <nespera@igalia.com>
>>>>> ---
>>>>
>>>> Hm, apparently 8250 and 7180 have the same thing.
>>>>
>>>> Mani, could you elaborate on this?
>>>
>>> So the remoteproc driver expects the wdog interrupts to be edge triggered
>>> as the rest of the interrupts, but DT specifies them as level triggered.
>>> This won't cause any issue during the first instance of the probe as the
>>> driver requested trigger will be given precedence. But if the probe
>>> defers for some reason and during the next try, request_irq() will fail
>>> with error similar to below:
>>>
>>> irq: type mismatch, failed to map hwirq-x for interrupt-controller@xxxxxx!
>>>
>>> This error is often confusing and I tried to fix it. But Maz didn't agree
>>> with me, so I just ended up fixing the DTs for some platform I have
>>> access to.
>>>
>>> So ideally, DTs of all platforms should be fixed to pass correct trigger
>>> type.
>> So, this should be edge for all platforms, correct?
> 
> I'd believe so, iirc when I looked at the driver it always requests that
> interrupt type.
> 
> For reference, these are my patches:
> 
> sm6350:
> https://github.com/z3ntu/linux/commit/0522b7a1b981d80884a785c7e654bb5094ea1bc2
> 
> sc7280:
> https://github.com/z3ntu/linux/commit/ead1d7b8f5648535b857cfa9250aac2480f00ed3
Can you send those, as well as fix up other outliers? Probably won't get in
for this cycle, but still very much worth to get them upstream..

Konrad

[PATCH v2 5/6] dt-bindings: arm: qcom: add oneplus-lemonade(p) bindings

[Nia Espera]

Document the devicetree bindings for oneplus-lemonade and oneplus-lemonadep.

Signed-off-by: Nia Espera <nespera@igalia.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index adbfaea32343..72832ee5b876 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -974,6 +974,8 @@ properties:
               - qcom,sm8350-mtp
               - sony,pdx214-generic
               - sony,pdx215-generic
+              - oneplus,lemonade
+              - oneplus,lemonadep
           - const: qcom,sm8350
 
       - items:

-- 
2.42.0

Re: [PATCH v2 5/6] dt-bindings: arm: qcom: add oneplus-lemonade(p) bindings

[Krzysztof Kozlowski]

On 18/10/2023 16:25, Nia Espera wrote:
> Document the devicetree bindings for oneplus-lemonade and oneplus-lemonadep.

A nit, subject: drop second/last, redundant "bindings". The
"dt-bindings" prefix is already stating that these are bindings.

> 
> Signed-off-by: Nia Espera <nespera@igalia.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index adbfaea32343..72832ee5b876 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -974,6 +974,8 @@ properties:
>                - qcom,sm8350-mtp
>                - sony,pdx214-generic
>                - sony,pdx215-generic
> +              - oneplus,lemonade
> +              - oneplus,lemonadep

Wrong order. 'o' does not go after 's'.

Best regards,
Krzysztof

[PATCH v2 6/6] arm64: dts: qcom: sm8350-lemonade(p): new devices

[Nia Espera]

Device tree files for OnePlus 9 and 9 Pro. Details of supported features
mentioned in the cover letter for this patch series, but for
accessibility also repeated here:

- USB OTG
- UFS
- Framebuffer display
- Touchscreen (for lemonade)
- Power & volume down keys
- Battery reading
- Modem, IPA, and remoteproc bringup

Steps to get booting:

- Wipe dtbo partition
- Flash vbmeta with disabled verity bit
- Flash kernel and initfs to boot partition with CLI args pd_ignore_unused
and clk_ignore_unused as v1 bootimg
- Flash rootfs to some other partition (probably super or userdata)

Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Nia Espera <nespera@igalia.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |    2 +
 .../arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi | 1042 ++++++++++++++++++++
 .../boot/dts/qcom/sm8350-oneplus-lemonade.dts      |   85 ++
 .../boot/dts/qcom/sm8350-oneplus-lemonadep.dts     |   20 +
 4 files changed, 1149 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 2cca20563a1d..369ad4721b29 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -211,6 +211,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-csot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-microsoft-surface-duo2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-oneplus-lemonade.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-oneplus-lemonadep.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx214.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx215.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-hdk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
new file mode 100644
index 000000000000..4397b72931b3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
@@ -0,0 +1,1042 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ *	Nia Espera <nespera@igalia.com>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
+#define SMB139x_1_SID 0x0b
+#define SMB139x_2_SID 0x0c
+#include <dt-bindings/iio/qcom,spmi-adc7-smb139x.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	chassis-type = "handset";
+	interrupt-parent = <&intc>;
+
+	bat: battery {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		voltage-min-design-microvolt = <3200000>;
+		energy-full-design-microwatt-hours = <15840000>;
+		charge-full-design-microamp-hours = <2225000>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@e4d00000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xe4d00000 0 0x2400000>;
+			width = <1080>;
+			height = <2412>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's (going to be) a lot of clocks, but it's
+			 * necessary due to unused clk cleanup & no panel
+			 * driver yet.
+			 */
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>;
+		};
+	};
+
+	display_panel_avdd: display-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "display_panel_avdd";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_down_n>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pmk8350_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm8350/lemonade/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&pm8350_s11>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&pm8350_s11>;
+		vdd-l8-supply = <&pmr735a_s2>;
+
+		/*
+		 * ARC regulators:
+		 * S5 - mx.lvl
+		 * S6 - gfx.lvl
+		 * S9 - mxc.lvl
+		 */
+
+		pm8350_s10: smps10 {
+			regulator-name = "pm8350_s10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s11: smps11 {
+			regulator-name = "pm8350_s11";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1012000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s12: smps12 {
+			regulator-name = "pm8350_s12";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l1: ldo1 {
+			regulator-name = "pm8350_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l2: ldo2 {
+			regulator-name = "pm8350_l2";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l3: ldo3 {
+			regulator-name = "pm8350_l3";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		pm8350_l5: ldo5 {
+			regulator-name = "pm8350_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l6: ldo6 {
+			regulator-name = "pm8350_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l7: ldo7 {
+			regulator-name = "pm8350_l7";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L8 - lcx.lvl (ARC) */
+
+		pm8350_l9: ldo9 {
+			regulator-name = "pm8350_l9";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&pm8350c_s1>;
+		vdd-l2-l8-supply = <&pm8350c_s1>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&pm8350_s12>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		pm8350c_s1: smps1 {
+			regulator-name = "pm8350c_s1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* S2 - ebi.lvl (ARC) */
+
+		pm8350c_s3: smps3 {
+			regulator-name = "pm8350c_s3";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * ARC regulators:
+		 * S4 - mss.lvl
+		 * S6 - cx.lvl
+		 * S8 - mmcx.lvl
+		 */
+
+		pm8350c_s10: smps10 {
+			regulator-name = "pm8350c_s10";
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l1: ldo1 {
+			regulator-name = "pm8350c_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l2: ldo2 {
+			regulator-name = "pm8350c_l2";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l3: ldo3 {
+			regulator-name = "pm8350c_l3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l4: ldo4 {
+			regulator-name = "pm8350c_l4";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l5: ldo5 {
+			regulator-name = "pm8350c_l5";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l6: ldo6 {
+			regulator-name = "pm8350c_l6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l7: ldo7 {
+			regulator-name = "pm8350c_l7";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l8: ldo8 {
+			regulator-name = "pm8350c_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l9: ldo9 {
+			regulator-name = "pm8350c_l9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l10: ldo10 {
+			regulator-name = "pm8350c_l10";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l11: ldo11 {
+			regulator-name = "pm8350c_l11";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l12: ldo12 {
+			regulator-name = "pm8350c_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l13: ldo13 {
+			regulator-name = "pm8350c_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3400000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+
+	/* pm8350b has one regulator here; unused for now */
+
+	regulators-2 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&pmr735a_s2>;
+		vdd-l3-supply = <&pmr735a_s1>;
+		vdd-l4-supply = <&pm8350c_s1>;
+		vdd-l5-l6-supply = <&pm8350c_s1>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		pmr735a_s1: smps1 {
+			regulator-name = "pmr735a_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1280000>;
+		};
+
+		pmr735a_s2: smps2 {
+			regulator-name = "pmr735a_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		pmr735a_s3: smps3 {
+			regulator-name = "pmr735a_s3";
+			regulator-min-microvolt = <2208000>;
+			regulator-max-microvolt = <2352000>;
+		};
+
+		pmr735a_l1: ldo1 {
+			regulator-name = "pmr735a_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		pmr735a_l2: ldo2 {
+			regulator-name = "pmr735a_l2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l3: ldo3 {
+			regulator-name = "pmr735a_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: ldo4 {
+			regulator-name = "pmr735a_l4";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1872000>;
+		};
+
+		pmr735a_l5: ldo5 {
+			regulator-name = "pmr735a_l5";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pmr735a_l6: ldo6 {
+			regulator-name = "pmr735a_l6";
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <904000>;
+		};
+
+		pmr735a_l7: ldo7 {
+			regulator-name = "pmr735a_l7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8350/lemonade/cdsp.mbn";
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	bq27541: fuel-gauge@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+		monitored-battery = <&bat>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* Touchscreens: Syna TCM oncell or Samsung s6sy761 */
+};
+
+&i2c13 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	fsa4480@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+		mode-switch;
+		orientation-switch;
+	};
+
+	/* Qualcomm PM8008i/PM8008j @ 8, 9, c, d */
+};
+
+&i2c15 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* sn-nci NFC controller @ 28 */
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	firmware-name = "qcom/sm8350/lemonade/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mpss {
+	firmware-name = "qcom/sm8350/lemonade/modem.mbn";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&pm8350_l5>;
+	vdda-pll-supply = <&pm8350_l6>;
+
+	status = "okay";
+};
+
+&pm8350_gpios {
+	gpio1_adc_default: gpio1-adc-default-state {
+		pins = "gpio1";
+		function = "normal";
+		bias-high-impedance;
+		bias-disable;
+	};
+
+	gpio3_adc_default: gpio3-adc-default-state {
+		pins = "gpio3";
+		function = "normal";
+		bias-high-impedance;
+		bias-disable;
+	};
+};
+
+&pm8350_gpios {
+	vol_down_n: vol-down-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	pm8350-msm-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350-cam-flash-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350-hot-pocket-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350-wide-rfc-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350-rear-tof-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350b-usb-conn-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350b-wl-chg-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_adc_default>, <&gpio3_adc_default>;
+
+	/* pmk8350-ref-gnd */
+	channel@0 {
+		reg = <0x00>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_ref_gnd";
+	};
+
+	/* pmk8350-vref-1p25 */
+	channel@1 {
+		reg = <0x01>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_vref_1p25";
+	};
+
+	/* pmk8350-die-temp */
+	channel@3 {
+		reg = <0x03>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_die_temp";
+	};
+
+	/* pm8350-ref-gnd */
+	channel@100 {
+		reg = <0x100>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_ref_gnd";
+	};
+
+	/*pm8350-vref-1p25*/
+	channel@101 {
+		reg = <0x101>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_vref_1p25";
+	};
+
+	/* pm8350-die-temp */
+	channel@103 {
+		reg = <0x103>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_die_temp";
+	};
+
+	/* pm8350-vph-pwr */
+	channel@18e {
+		reg = <0x18e>;
+		qcom,pre-scaling = <1 3>;
+		label = "pm8350_vph_pwr";
+	};
+
+	/* pm8350b-ref-gnd */
+	channel@300 {
+		reg = <0x300>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_ref_gnd";
+	};
+
+	/* pm8350b-vref-1p25 */
+	channel@301 {
+		reg = <0x301>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_vref_1p25";
+	};
+
+	/* pm8350b-die-temp */
+	channel@303 {
+		reg = <0x303>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_die_temp";
+	};
+
+	/* pm8350b-vph-pwr */
+	channel@38e {
+		reg = <0x38e>;
+		qcom,pre-scaling = <1 3>;
+		label = "pm8350b_vph_pwr";
+	};
+
+	/* pm8350b-vbat-sns */
+	channel@38f {
+		reg = <0x38f>;
+		qcom,pre-scaling = <1 3>;
+		label = "pm8350b_vbat_sns";
+	};
+
+	/* pm8350-msm-therm */
+	channel@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_msm_therm";
+	};
+
+	/* pm8350-cam-flash-therm */
+	channel@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_cam_flash_therm";
+	};
+
+	/* pm8350-hot-pocket-therm */
+	channel@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_hot_pocket_therm";
+	};
+
+	/* pm8350-wide-rfc-therm */
+	channel@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_wide_rfc_therm";
+	};
+
+	/* pm8350-rear-tof-therm */
+	channel@148 {
+		reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_rear_tof_therm";
+	};
+
+	/* pm8350b-usb-conn-therm */
+	channel@347 {
+		reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_usb_conn_therm";
+	};
+
+	/* pm8350b-wl-chg-therm */
+	channel@34b {
+		reg = <PM8350B_ADC7_GPIO2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_wl_chg_therm";
+	};
+
+	/* pm8350b-chg-temp */
+	channel@310 {
+		reg = <PM8350B_ADC7_CHG_TEMP>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_chg_temp";
+	};
+
+	/* pmr735a-ref-gnd */
+	channel@400 {
+		reg = <0x400>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_ref_gnd";
+	};
+
+	/* pmr735a-vref-1p25 */
+	channel@401 {
+		reg = <0x401>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_vref_1p25";
+	};
+
+	/* pmr735a-die-temp */
+	channel@403 {
+		reg = <0x403>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_die_temp";
+	};
+
+	/* pmr735b-ref-gnd */
+	channel@500 {
+		reg = <0x500>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735b_ref_gnd";
+	};
+
+	/* pmr735b-vref-1p25 */
+	channel@501 {
+		reg = <0x501>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735b_vref_1p25";
+	};
+
+	/* pmr735b-die-temp */
+	channel@503 {
+		reg = <0x503>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735b_die_temp";
+	};
+
+	/* smb139x-1-smb-temp */
+	channel@b06 {
+		reg = <SMB139x_1_ADC7_SMB_TEMP>;
+		qcom,pre-scaling = <1 1>;
+		label = "smb139x_1_smb_temp";
+	};
+
+	/* smb139x-2-smb-temp */
+	channel@c06 {
+		reg = <SMB139x_2_ADC7_SMB_TEMP>;
+		qcom,pre-scaling = <1 1>;
+		label = "smb139x_2_smb_temp";
+	};
+
+	/* gpio1-v */
+	channel@128 {
+		reg = <0x128>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <0x2bc>;
+		qcom,pre-scaling = <1 1>;
+		label = "gpio1_v";
+	};
+
+	/* gpio3-v */
+	channel@12b {
+		reg = <0x12b>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <0x2bc>;
+		qcom,pre-scaling = <1 1>;
+		label = "gpio3_v";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&reserved_memory {
+	bootloader-log@9fff7000 {
+		reg = <0 0x9fff7000 0 0x8000>;
+	};
+
+	framebuffer@e1000000 {
+		reg = <0 0xe4d00000 0 0x02400000>;
+		no-map;
+	};
+
+	ramoops: ramoops@E9700000 {
+		compatible = "ramoops";
+		reg = <0 0xe9700000 0 0x05b8000>;
+		record-size = <0x40000>;
+		console-size = <0x40000>;
+		ftrace-size = <0x200000>;
+		pmsg-size = <0x200000>;
+		ecc-size = <0>;
+	};
+
+	reserved@ea700000 {
+		reg = <0 0xea700000 0 0x800000>;
+	};
+};
+
+&removed_mem {
+	reg = <0 0xd8800000 0 0x8e00000>;
+};
+
+&slpi {
+	firmware-name = "qcom/sm8350/lemonade/slpi.mbn";
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <52 8>;
+
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio94";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio95";
+			function = "pcie0_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio96";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		sleep-pins {
+			pins = "gpio95";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio97";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio98";
+			function = "pcie1_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			/* wil6210_refclk_en_pin lives here also */
+		};
+	};
+
+	/* Modem-related pin common on both devices */
+	rf_cable_ant0_active: rf-cable-ant0-active-state {
+		pins = "gpio165";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	tp_rst_active: tp-rst-active-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	/* tp_rst_suspend pinctrl is different per device, don't specify here */
+
+	tp_irq_active: tp-irq-active-state {
+		pins = "gpio23";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		input-enable;
+	};
+
+	tp_irq_suspend: tp-irq-suspend-state {
+		pins = "gpio23";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&pm8350_l7>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&pm8350_l9>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&pm8350_l5>;
+	vdda-max-microamp = <91600>;
+	vdda-pll-supply = <&pm8350_l6>;
+	vdda-pll-max-microamp = <19000>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	/*
+	 * Bug in interconnect driver breaks USB; RPMh is unable to power on
+	 * USB regulators without this.
+	 */
+	/delete-property/ interconnects;
+	/delete-property/ interconnect-names;
+
+	/* USB3 seems broken (though it's enabled downstream?) */
+	qcom,select-utmi-as-pipe-clk;
+
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Mode switching is untested */
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&pm8350_l5>;
+	vdda18-supply = <&pm8350c_l1>;
+	vdda33-supply = <&pm8350_l2>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts
new file mode 100644
index 000000000000..473f10d4fcf0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ *	Nia Espera <nespera@igalia.com>
+ */
+
+/dts-v1/;
+
+#include "sm8350-oneplus-common.dtsi"
+
+/ {
+	compatible = "oneplus,lemonade", "qcom,sm8350";
+	model = "OnePlus 9";
+};
+
+&i2c4 {
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupts-extended = <&tlmm 23 IRQ_TYPE_LEVEL_LOW>;
+
+		avdd-supply = <&pm8350c_l13>;
+		vdd-supply = <&pm8350c_l8>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&tp_rst_active>, <&tp_irq_active>, <&tp_enable_2v8>;
+		pinctrl-1 = <&tp_rst_suspend>, <&tp_irq_suspend>;
+	};
+};
+
+&mpss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rf_cable_ant0_active>,
+		    <&rf_cable_ant1_active>,
+		    <&rf_cable_ant2_active>,
+		    <&rf_cable_ant3_active>,
+		    <&rf_cable_ant7_active>;
+};
+
+&tlmm {
+	/* Modem antenna pins exclusive to lemonade */
+	rf_cable_ant1_active: rf-cable-ant1-active-state {
+		pins = "gpio27";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	rf_cable_ant2_active: rf-cable-ant2-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	rf_cable_ant3_active: rf-cable-ant3-active-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	rf_cable_ant7_active: rf-cable-ant7-active-state {
+		pins = "gpio155";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	tp_rst_suspend: tp-rst-suspend-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	tp_enable_2v8: tp-enable-2v8-state {
+		pins = "gpio74";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts
new file mode 100644
index 000000000000..bc7e5654bd3d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ *	Nia Espera <nespera@igalia.com>
+ */
+
+/dts-v1/;
+
+#include "sm8350-oneplus-common.dtsi"
+
+/ {
+	compatible = "oneplus,lemonadep", "qcom,sm8350";
+	model = "OnePlus 9 Pro";
+};
+
+&mpss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rf_cable_ant0_active>;
+};

-- 
2.42.0

Re: [PATCH v2 6/6] arm64: dts: qcom: sm8350-lemonade(p): new devices

[Krzysztof Kozlowski]

On 18/10/2023 16:25, Nia Espera wrote:
> Device tree files for OnePlus 9 and 9 Pro. Details of supported features
> mentioned in the cover letter for this patch series, but for
> accessibility also repeated here:
> 

...

> +	/* tp_rst_suspend pinctrl is different per device, don't specify here */
> +
> +	tp_irq_active: tp-irq-active-state {
> +		pins = "gpio23";
> +		function = "gpio";
> +		drive-strength = <8>;
> +		bias-disable;
> +		input-enable;

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

We shouldn't need to repeat the same comment twice.

Best regards,
Krzysztof

Re: [PATCH v2 6/6] arm64: dts: qcom: sm8350-lemonade(p): new devices

[Nia Espera]

On 10/18/23 16:34, Krzysztof Kozlowski wrote:
> On 18/10/2023 16:25, Nia Espera wrote:
>> Device tree files for OnePlus 9 and 9 Pro. Details of supported features
>> mentioned in the cover letter for this patch series, but for
>> accessibility also repeated here:
>>
> 
> ...
> 
>> +	/* tp_rst_suspend pinctrl is different per device, don't specify here */
>> +
>> +	tp_irq_active: tp-irq-active-state {
>> +		pins = "gpio23";
>> +		function = "gpio";
>> +		drive-strength = <8>;
>> +		bias-disable;
>> +		input-enable;
> 
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check W=1` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).

I noticed that dtbs_check was unhappy here, but I figured it's okay to 
ignore that since it didn't complain in other places (e.g. lines 
554-555) and assumed the error was just a bug in the yaml. Sorry!

> We shouldn't need to repeat the same comment twice.
> 
> Best regards,
> Krzysztof
> 

Re: [PATCH v2 6/6] arm64: dts: qcom: sm8350-lemonade(p): new devices

[Krzysztof Kozlowski]

On 18/10/2023 16:43, Nia Espera wrote:
> 
> On 10/18/23 16:34, Krzysztof Kozlowski wrote:
>> On 18/10/2023 16:25, Nia Espera wrote:
>>> Device tree files for OnePlus 9 and 9 Pro. Details of supported features
>>> mentioned in the cover letter for this patch series, but for
>>> accessibility also repeated here:
>>>
>>
>> ...
>>
>>> +	/* tp_rst_suspend pinctrl is different per device, don't specify here */
>>> +
>>> +	tp_irq_active: tp-irq-active-state {
>>> +		pins = "gpio23";
>>> +		function = "gpio";
>>> +		drive-strength = <8>;
>>> +		bias-disable;
>>> +		input-enable;
>>
>> It does not look like you tested the DTS against bindings. Please run
>> `make dtbs_check W=1` (see
>> Documentation/devicetree/bindings/writing-schema.rst or
>> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
>> for instructions).
> 
> I noticed that dtbs_check was unhappy here, but I figured it's okay to 
> ignore that since it didn't complain in other places (e.g. lines 
> 554-555) and assumed the error was just a bug in the yaml. Sorry!

There are no other DTS having this property for TLMM, so you could not
have seen this in other boards.

Best regards,
Krzysztof