From: Matt Sealey <matt@genesi-usa.com>
To: Matt Sealey <matt@genesi-usa.com>,
Mitch Bradley <wmb@firmworks.com>,
linuxppc-dev list <linuxppc-dev@ozlabs.org>,
devicetree-discuss list <devicetree-discuss@ozlabs.org>
Subject: Re: GPIO - marking individual pins (not) available in device tree
Date: Mon, 27 Oct 2008 10:40:12 -0500 [thread overview]
Message-ID: <4905E0DC.104@genesi-usa.com> (raw)
In-Reply-To: <20081026234747.GD22339@yookeroo.seuss>
David Gibson wrote:
> Um.. I can't actually follow what you're getting at there, sorry.
Imagine in your head that you have a GPIO controller that has a
32-bit register potentially controlling 32 pins on the chip.
Imagine that rather than being able to allocate 6 GPIO pins
*right next to each other* in the register and saying that
you start at "pin" 15 and use the next 6 "pins", you have to
spread it around and use pin 1, pin 8, pin 9, pin 11, pin 15,
pin 30, to make up this peripheral.
As far as I can tell there is no way at all to specify a set of
GPIO pins which are NOT consecutive because the current GPIO
spec stops after specifying a controller bank (the 32-bit
register).
--
Matt Sealey <matt@genesi-usa.com>
Genesi, Manager, Developer Relations
next prev parent reply other threads:[~2008-10-27 15:40 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-23 21:32 GPIO - marking individual pins (not) available in device tree Matt Sealey
2008-10-23 22:22 ` Mitch Bradley
2008-10-23 23:05 ` Matt Sealey
2008-10-24 0:52 ` Mitch Bradley
[not found] ` <49011C42.2020101-D5eQfiDGL7eakBO8gow8eQ@public.gmane.org>
2008-10-24 3:29 ` David Gibson
[not found] ` <20081024032944.GE4267-787xzQ0H9iRg7VrjXcPTGA@public.gmane.org>
2008-10-24 4:17 ` Mitch Bradley
[not found] ` <49014C69.8020408-D5eQfiDGL7eakBO8gow8eQ@public.gmane.org>
2008-10-24 4:45 ` David Gibson
2008-10-24 22:14 ` Matt Sealey
2008-10-26 23:47 ` David Gibson
2008-10-27 15:40 ` Matt Sealey [this message]
2008-10-27 18:34 ` Anton Vorontsov
2008-10-27 18:56 ` Matt Sealey
[not found] ` <49060EC3.1070704-sEEEE4iEDtaXzmuOJsdVMQ@public.gmane.org>
2008-10-27 20:10 ` Anton Vorontsov
[not found] ` <20081027201023.GA18642-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-10-27 21:56 ` Matt Sealey
[not found] ` <49063929.3060900-sEEEE4iEDtaXzmuOJsdVMQ@public.gmane.org>
2008-10-27 23:12 ` Anton Vorontsov
2008-10-27 23:40 ` Anton Vorontsov
2008-10-28 0:47 ` Matt Sealey
[not found] ` <20081027231221.GA22008-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-10-28 1:11 ` Matt Sealey
2008-10-28 2:37 ` Anton Vorontsov
[not found] ` <20081028023722.GA30057-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-10-28 16:53 ` Matt Sealey
2008-10-28 17:39 ` Grant Likely
[not found] ` <fa686aa40810281039v4f22a464u3eb1d421e1226fc8-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-10-28 19:46 ` Matt Sealey
[not found] ` <4905E0DC.104-sEEEE4iEDtaXzmuOJsdVMQ@public.gmane.org>
2008-10-28 0:15 ` David Gibson
2008-10-28 0:51 ` Matt Sealey
2008-10-28 1:50 ` David Gibson
[not found] ` <4906620B.7080308-sEEEE4iEDtaXzmuOJsdVMQ@public.gmane.org>
2008-10-28 5:20 ` Grant Likely
2008-10-24 22:03 ` Matt Sealey
2008-10-24 22:20 ` Stephen Neuendorffer
2008-10-26 21:39 ` Matt Sealey
2008-10-24 23:44 ` Mitch Bradley
[not found] ` <49025DE0.6070403-D5eQfiDGL7eakBO8gow8eQ@public.gmane.org>
2008-10-26 21:13 ` Matt Sealey
2008-10-26 23:53 ` David Gibson
[not found] ` <20081026235303.GE22339-787xzQ0H9iRg7VrjXcPTGA@public.gmane.org>
2008-10-27 16:12 ` Matt Sealey
[not found] ` <4905E857.6040206-sEEEE4iEDtaXzmuOJsdVMQ@public.gmane.org>
2008-10-27 16:35 ` Scott Wood
2008-10-27 17:05 ` Matt Sealey
2008-10-27 17:25 ` Scott Wood
2008-10-27 17:49 ` Matt Sealey
2008-10-27 17:54 ` Scott Wood
[not found] ` <49060047.2010809-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2008-10-28 0:38 ` David Gibson
2008-10-28 0:34 ` David Gibson
2008-10-24 4:58 ` David Gibson
[not found] ` <4900F90B.80703-D5eQfiDGL7eakBO8gow8eQ@public.gmane.org>
2008-10-24 3:27 ` David Gibson
2008-10-24 16:41 ` Anton Vorontsov
2008-10-24 17:01 ` Anton Vorontsov
[not found] ` <20081024170128.GA20577-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-10-24 22:17 ` Matt Sealey
2008-10-24 22:37 ` Anton Vorontsov
-- strict thread matches above, loose matches on Subject: below --
2008-10-28 13:31 Konstantinos Margaritis
2008-10-28 14:11 ` Anton Vorontsov
2008-10-28 14:15 ` Grant Likely
[not found] ` <fa686aa40810280715m3275a302jd43ab517d2d455fc-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-10-28 17:06 ` Matt Sealey
2008-10-28 17:32 ` Grant Likely
2008-10-28 23:37 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4905E0DC.104@genesi-usa.com \
--to=matt@genesi-usa.com \
--cc=devicetree-discuss@ozlabs.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=wmb@firmworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox