From: Walter Goossens <waltergoossens-CmkmPbn3yAE@public.gmane.org>
To: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
nios2-dev-1eJk0qcHJCcaeqlQEoCUNoJY59XmG8rH@public.gmane.org
Subject: [PATCHv2] Add devicetree support to altera_jtaguart
Date: Thu, 13 Jan 2011 02:18:55 +0100 [thread overview]
Message-ID: <4D2E52FF.5060102@home.nl> (raw)
In-Reply-To: <20110112230607.GA31712-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 117 bytes --]
This patch adds devicetree support to the altera_jtaguart driver.
Tested on hardware on the nios2 architecture.
[-- Attachment #2: altera_jtaguart_fdt.patch --]
[-- Type: text/plain, Size: 1893 bytes --]
diff --git a/drivers/serial/altera_jtaguart.c b/drivers/serial/altera_jtaguart.c
index f9b49b5..238348e 100644
--- a/drivers/serial/altera_jtaguart.c
+++ b/drivers/serial/altera_jtaguart.c
@@ -433,15 +433,33 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
struct uart_port *port;
int i;
- for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
+ for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) {
port = &altera_jtaguart_ports[i].port;
+ if(platp)
+ {
+ if(!platp[i].mapbase)
+ break;
+
+ port->mapbase = platp[i].mapbase;
+ port->irq = platp[i].irq;
+ } else {
+#ifdef CONFIG_OF
+ struct resource *res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ struct resource *res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if((!res_mem) || (!res_irq))
+ break;
+
+ port->mapbase = res_mem->start;
+ port->irq = res_irq->start;
+#else
+ break;
+#endif
+ }
port->line = i;
port->type = PORT_ALTERA_JTAGUART;
- port->mapbase = platp[i].mapbase;
port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
port->iotype = SERIAL_IO_MEM;
- port->irq = platp[i].irq;
port->ops = &altera_jtaguart_ops;
port->flags = ASYNC_BOOT_AUTOCONF;
@@ -464,6 +482,15 @@ static int __devexit altera_jtaguart_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static struct of_device_id altera_jtaguart_match[] = {
+ {
+ .compatible = "altera,altera_juart",
+ },
+ {},
+}
+MODULE_DEVICE_TABLE(of, altera_jtaguart_match);
+#endif /* CONFIG_OF */
static struct platform_driver altera_jtaguart_platform_driver = {
.probe = altera_jtaguart_probe,
@@ -471,6 +498,9 @@ static struct platform_driver altera_jtaguart_platform_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
+#ifdef CONFIG_OF
+ .of_match_table = altera_jtaguart_match,
+#endif
},
};
[-- Attachment #3: Type: text/plain, Size: 192 bytes --]
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
next prev parent reply other threads:[~2011-01-13 1:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-12 22:17 [PATCH] Add devicetree support to altera_jtaguart Walter Goossens
[not found] ` <4D2E287B.7000005-CmkmPbn3yAE@public.gmane.org>
2011-01-12 23:06 ` Grant Likely
[not found] ` <20110112230607.GA31712-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-01-13 1:18 ` Walter Goossens [this message]
[not found] ` <4D2E52FF.5060102-CmkmPbn3yAE@public.gmane.org>
2011-01-18 16:35 ` [Nios2-dev] [PATCHv2] " Tobias Klauser
2011-01-23 13:17 ` [PATCH v3] " Walter Goossens
[not found] ` <4D3C2A67.6030408-CmkmPbn3yAE@public.gmane.org>
2011-01-24 12:28 ` Tobias Klauser
2011-01-13 1:25 ` [PATCH] " Walter Goossens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D2E52FF.5060102@home.nl \
--to=waltergoossens-cmkmpbn3yae@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=nios2-dev-1eJk0qcHJCcaeqlQEoCUNoJY59XmG8rH@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).