Re: [PATCH TIP v2 03/14] x86/dtb: Add a device tree for CE4100

[Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>]

Grant Likely wrote:
> You can go ahead and keep the revision history above the s-o-b and ---
> lines.  It turns out that having the revision history in the commit
> text is actually useful when trying to figure out what version of a
> patch actually got applied.
Okay.

>> diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts
>> new file mode 100644
>> index 0000000..e888657
>> --- /dev/null
>> +++ b/arch/x86/platform/ce4100/falconfalls.dts
>> @@ -0,0 +1,424 @@

>> +	soc@0 {
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		compatible = "intel,ce4100-cp";
> 
> You'll need to add blurbs to Documentation/devicetree/bindings
> (Documentation/powerpc/dts-bindings in Linus' tree; renamed in
> linux-next) for each of these new compatible bindings to document the
> part that they describe and any special properties that go with each
> compatible value (if any).  You can send it as a followup patch.

Good point, will do.

>> +				gpio@b,1 {
>> +					compatible = "pci8086,2e67.2",
>> +						   "pci8086,2e67",
>> +						   "pciclassff0000",
>> +						   "pciclassff00";
>> +
>> +					reg = <0x15900 0x0 0x0 0x0 0x0>;
>> +					interrupts = <15 1>;
>> +				};
> 
> You'll probably want to make use of the gpio-controller binding for
> the gpio nodes so that other nodes can reference it.  Not a
> showstopper for this patch though.

Right. I'll make it follow-up once I get to the gpio functionality.

> Otherwise looks good to me.
thanks.

> g.

Sebastian