* [PATCH] DT: Use helper function to read u32 values
@ 2011-07-01 13:55 Manjunatha GK
[not found] ` <BANLkTin+WCRrxhOBNoL_AJJAkS-w9ybXqg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Manjunatha GK @ 2011-07-01 13:55 UTC (permalink / raw)
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org",
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
[-- Attachment #1.1: Type: text/plain, Size: 7498 bytes --]
Use helper function of_property_read_u32() in place of of_get_property
and be32_to_cpup() api's for code optimization.
Compile tested the changes.
Signed-off-by: G, Manjunath Kondaiah <manjugk-l0cyMroinI0@public.gmane.org>
---
drivers/of/irq.c | 37 ++++++++++++++++++++++---------------
drivers/of/of_i2c.c | 8 +++-----
drivers/of/of_mdio.c | 16 ++++++----------
3 files changed, 31 insertions(+), 30 deletions(-)
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 9f689f1..13c02e2 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -59,20 +59,20 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
struct device_node *of_irq_find_parent(struct device_node *child)
{
struct device_node *p;
- const __be32 *parp;
+ u32 *parp = NULL;
if (!of_node_get(child))
return NULL;
do {
- parp = of_get_property(child, "interrupt-parent", NULL);
+ of_property_read_u32(child, "interrupt-parent", parp);
if (parp == NULL)
p = of_get_parent(child);
else {
if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
p = of_node_get(of_irq_dflt_pic);
else
- p = of_find_node_by_phandle(be32_to_cpup(parp));
+ p = of_find_node_by_phandle(*parp);
}
of_node_put(child);
child = p;
@@ -100,7 +100,8 @@ int of_irq_map_raw(struct device_node *parent, const
__be32 *intspec,
u32 ointsize, const __be32 *addr, struct of_irq *out_irq)
{
struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
- const __be32 *tmp, *imap, *imask;
+ const __be32 *imap, *imask;
+ u32 *tmp;
u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
int imaplen, match, i;
@@ -115,9 +116,10 @@ int of_irq_map_raw(struct device_node *parent, const
__be32 *intspec,
* is none, we are nice and just walk up the tree
*/
do {
- tmp = of_get_property(ipar, "#interrupt-cells", NULL);
+ tmp = NULL;
+ of_property_read_u32(ipar, "#interrupt-cells", tmp);
if (tmp != NULL) {
- intsize = be32_to_cpu(*tmp);
+ intsize = *tmp;
break;
}
tnode = ipar;
@@ -139,14 +141,15 @@ int of_irq_map_raw(struct device_node *parent, const
__be32 *intspec,
*/
old = of_node_get(ipar);
do {
- tmp = of_get_property(old, "#address-cells", NULL);
+ tmp = NULL;
+ of_property_read_u32(old, "#address-cells", tmp);
tnode = of_get_parent(old);
of_node_put(old);
old = tnode;
} while (old && tmp == NULL);
of_node_put(old);
old = NULL;
- addrsize = (tmp == NULL) ? 2 : be32_to_cpu(*tmp);
+ addrsize = (tmp == NULL) ? 2 : (*tmp);
pr_debug(" -> addrsize=%d\n", addrsize);
@@ -225,14 +228,16 @@ int of_irq_map_raw(struct device_node *parent, const
__be32 *intspec,
/* Get #interrupt-cells and #address-cells of new
* parent
*/
- tmp = of_get_property(newpar, "#interrupt-cells", NULL);
+ tmp = NULL;
+ of_property_read_u32(newpar, "#interrupt-cells", tmp);
if (tmp == NULL) {
pr_debug(" -> parent lacks #interrupt-cells!\n");
goto fail;
}
- newintsize = be32_to_cpu(*tmp);
- tmp = of_get_property(newpar, "#address-cells", NULL);
- newaddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp);
+ newintsize = *tmp;
+ tmp = NULL;
+ of_property_read_u32(newpar, "#address-cells", tmp);
+ newaddrsize = (tmp == NULL) ? 0 : (*tmp);
pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
newintsize, newaddrsize);
@@ -284,7 +289,8 @@ EXPORT_SYMBOL_GPL(of_irq_map_raw);
int of_irq_map_one(struct device_node *device, int index, struct of_irq
*out_irq)
{
struct device_node *p;
- const __be32 *intspec, *tmp, *addr;
+ const __be32 *intspec, *addr;
+ u32 *tmp;
u32 intsize, intlen;
int res = -EINVAL;
@@ -311,10 +317,11 @@ int of_irq_map_one(struct device_node *device, int
index, struct of_irq *out_irq
return -EINVAL;
/* Get size of interrupt specifier */
- tmp = of_get_property(p, "#interrupt-cells", NULL);
+ tmp = NULL;
+ of_get_property(p, "#interrupt-cells", tmp);
if (tmp == NULL)
goto out;
- intsize = be32_to_cpu(*tmp);
+ intsize = *tmp;
pr_debug(" intsize=%d intlen=%d\n", intsize, intlen);
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index f37fbeb..7113512 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -32,8 +32,7 @@ void of_i2c_register_devices(struct i2c_adapter *adap)
for_each_child_of_node(adap->dev.of_node, node) {
struct i2c_board_info info = {};
struct dev_archdata dev_ad = {};
- const __be32 *addr;
- int len;
+ u32 *addr = NULL;
dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
@@ -43,14 +42,13 @@ void of_i2c_register_devices(struct i2c_adapter *adap)
continue;
}
- addr = of_get_property(node, "reg", &len);
- if (!addr || (len < sizeof(int))) {
+ if (of_get_property(node, "reg", addr)) {
dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
node->full_name);
continue;
}
- info.addr = be32_to_cpup(addr);
+ info.addr = *addr;
if (info.addr > (1 << 10) - 1) {
dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
info.addr, node->full_name);
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index d35e300..d4b6503 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -52,19 +52,17 @@ int of_mdiobus_register(struct mii_bus *mdio, struct
device_node *np)
/* Loop over the child nodes and register a phy_device for each one */
for_each_child_of_node(np, child) {
- const __be32 *paddr;
u32 addr;
- int len;
+ u32 *paddr = NULL;
/* A PHY must have a reg property in the range [0-31] */
- paddr = of_get_property(child, "reg", &len);
- if (!paddr || len < sizeof(*paddr)) {
+ if (of_property_read_u32(child, "reg", paddr)) {
dev_err(&mdio->dev, "%s has invalid PHY address\n",
child->full_name);
continue;
}
- addr = be32_to_cpup(paddr);
+ addr = *paddr;
if (addr >= 32) {
dev_err(&mdio->dev, "%s PHY address %i is too large\n",
child->full_name, addr);
@@ -169,8 +167,7 @@ struct phy_device *of_phy_connect_fixed_link(struct
net_device *dev,
struct device_node *net_np;
char bus_id[MII_BUS_ID_SIZE + 3];
struct phy_device *phy;
- const __be32 *phy_id;
- int sz;
+ u32 *phy_id = NULL;
if (!dev->dev.parent)
return NULL;
@@ -179,11 +176,10 @@ struct phy_device *of_phy_connect_fixed_link(struct
net_device *dev,
if (!net_np)
return NULL;
- phy_id = of_get_property(net_np, "fixed-link", &sz);
- if (!phy_id || sz < sizeof(*phy_id))
+ if (of_property_read_u32(net_np, "fixed-link", phy_id))
return NULL;
- sprintf(bus_id, PHY_ID_FMT, "0", be32_to_cpu(phy_id[0]));
+ sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]);
phy = phy_connect(dev, bus_id, hndlr, 0, iface);
return IS_ERR(phy) ? NULL : phy;
--
1.7.4.1
[-- Attachment #1.2: Type: text/html, Size: 8694 bytes --]
[-- Attachment #2: Type: text/plain, Size: 192 bytes --]
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
^ permalink raw reply related [flat|nested] 4+ messages in thread[parent not found: <BANLkTin+WCRrxhOBNoL_AJJAkS-w9ybXqg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH] DT: Use helper function to read u32 values [not found] ` <BANLkTin+WCRrxhOBNoL_AJJAkS-w9ybXqg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2011-07-01 14:22 ` Rob Herring 2011-07-01 14:37 ` Grant Likely 1 sibling, 0 replies; 4+ messages in thread From: Rob Herring @ 2011-07-01 14:22 UTC (permalink / raw) To: Manjunatha GK; +Cc: " <devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ On 07/01/2011 08:55 AM, Manjunatha GK wrote: > Use helper function of_property_read_u32() in place of of_get_property > and be32_to_cpup() api's for code optimization. > > Compile tested the changes. > > Signed-off-by: G, Manjunath Kondaiah <manjugk-l0cyMroinI0@public.gmane.org > <mailto:manjugk-l0cyMroinI0@public.gmane.org>> > --- > drivers/of/irq.c | 37 ++++++++++++++++++++++--------------- > drivers/of/of_i2c.c | 8 +++----- > drivers/of/of_mdio.c | 16 ++++++---------- > 3 files changed, 31 insertions(+), 30 deletions(-) > > diff --git a/drivers/of/irq.c b/drivers/of/irq.c > index 9f689f1..13c02e2 100644 > --- a/drivers/of/irq.c > +++ b/drivers/of/irq.c > @@ -59,20 +59,20 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); > struct device_node *of_irq_find_parent(struct device_node *child) > { > struct device_node *p; > - const __be32 *parp; > + u32 *parp = NULL; > > if (!of_node_get(child)) > return NULL; > > do { > - parp = of_get_property(child, "interrupt-parent", NULL); > + of_property_read_u32(child, "interrupt-parent", parp); This won't work as you are passing in a NULL ptr. You need to pass in the address of a valid u32. The same applies to the ones below. > if (parp == NULL) > p = of_get_parent(child); > else { > if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) > p = of_node_get(of_irq_dflt_pic); > else > - p = of_find_node_by_phandle(be32_to_cpup(parp)); > + p = of_find_node_by_phandle(*parp); > } > of_node_put(child); > child = p; > @@ -100,7 +100,8 @@ int of_irq_map_raw(struct device_node *parent, const > __be32 *intspec, > u32 ointsize, const __be32 *addr, struct of_irq *out_irq) > { > struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; > - const __be32 *tmp, *imap, *imask; > + const __be32 *imap, *imask; > + u32 *tmp; > u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; > int imaplen, match, i; > > @@ -115,9 +116,10 @@ int of_irq_map_raw(struct device_node *parent, > const __be32 *intspec, > * is none, we are nice and just walk up the tree > */ > do { > - tmp = of_get_property(ipar, "#interrupt-cells", NULL); > + tmp = NULL; > + of_property_read_u32(ipar, "#interrupt-cells", tmp); > if (tmp != NULL) { > - intsize = be32_to_cpu(*tmp); > + intsize = *tmp; > break; > } > tnode = ipar; > @@ -139,14 +141,15 @@ int of_irq_map_raw(struct device_node *parent, > const __be32 *intspec, > */ > old = of_node_get(ipar); > do { > - tmp = of_get_property(old, "#address-cells", NULL); > + tmp = NULL; > + of_property_read_u32(old, "#address-cells", tmp); > tnode = of_get_parent(old); > of_node_put(old); > old = tnode; > } while (old && tmp == NULL); > of_node_put(old); > old = NULL; > - addrsize = (tmp == NULL) ? 2 : be32_to_cpu(*tmp); > + addrsize = (tmp == NULL) ? 2 : (*tmp); > > pr_debug(" -> addrsize=%d\n", addrsize); > > @@ -225,14 +228,16 @@ int of_irq_map_raw(struct device_node *parent, > const __be32 *intspec, > /* Get #interrupt-cells and #address-cells of new > * parent > */ > - tmp = of_get_property(newpar, "#interrupt-cells", NULL); > + tmp = NULL; > + of_property_read_u32(newpar, "#interrupt-cells", tmp); > if (tmp == NULL) { > pr_debug(" -> parent lacks #interrupt-cells!\n"); > goto fail; > } > - newintsize = be32_to_cpu(*tmp); > - tmp = of_get_property(newpar, "#address-cells", NULL); > - newaddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp); > + newintsize = *tmp; > + tmp = NULL; > + of_property_read_u32(newpar, "#address-cells", tmp); > + newaddrsize = (tmp == NULL) ? 0 : (*tmp); > > pr_debug(" -> newintsize=%d, newaddrsize=%d\n", > newintsize, newaddrsize); > @@ -284,7 +289,8 @@ EXPORT_SYMBOL_GPL(of_irq_map_raw); > int of_irq_map_one(struct device_node *device, int index, struct of_irq > *out_irq) > { > struct device_node *p; > - const __be32 *intspec, *tmp, *addr; > + const __be32 *intspec, *addr; > + u32 *tmp; > u32 intsize, intlen; > int res = -EINVAL; > > @@ -311,10 +317,11 @@ int of_irq_map_one(struct device_node *device, int > index, struct of_irq *out_irq > return -EINVAL; > > /* Get size of interrupt specifier */ > - tmp = of_get_property(p, "#interrupt-cells", NULL); > + tmp = NULL; > + of_get_property(p, "#interrupt-cells", tmp); > if (tmp == NULL) > goto out; > - intsize = be32_to_cpu(*tmp); > + intsize = *tmp; > > pr_debug(" intsize=%d intlen=%d\n", intsize, intlen); > > diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c > index f37fbeb..7113512 100644 > --- a/drivers/of/of_i2c.c > +++ b/drivers/of/of_i2c.c > @@ -32,8 +32,7 @@ void of_i2c_register_devices(struct i2c_adapter *adap) > for_each_child_of_node(adap->dev.of_node, node) { > struct i2c_board_info info = {}; > struct dev_archdata dev_ad = {}; > - const __be32 *addr; > - int len; > + u32 *addr = NULL; > > dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name); > > @@ -43,14 +42,13 @@ void of_i2c_register_devices(struct i2c_adapter *adap) > continue; > } > > - addr = of_get_property(node, "reg", &len); > - if (!addr || (len < sizeof(int))) { > + if (of_get_property(node, "reg", addr)) { > dev_err(&adap->dev, "of_i2c: invalid reg on %s\n", > node->full_name); > continue; > } > > - info.addr = be32_to_cpup(addr); > + info.addr = *addr; > if (info.addr > (1 << 10) - 1) { > dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n", > info.addr, node->full_name); > diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c > index d35e300..d4b6503 100644 > --- a/drivers/of/of_mdio.c > +++ b/drivers/of/of_mdio.c > @@ -52,19 +52,17 @@ int of_mdiobus_register(struct mii_bus *mdio, struct > device_node *np) > > /* Loop over the child nodes and register a phy_device for each one */ > for_each_child_of_node(np, child) { > - const __be32 *paddr; > u32 addr; > - int len; > + u32 *paddr = NULL; > > /* A PHY must have a reg property in the range [0-31] */ > - paddr = of_get_property(child, "reg", &len); > - if (!paddr || len < sizeof(*paddr)) { > + if (of_property_read_u32(child, "reg", paddr)) { > dev_err(&mdio->dev, "%s has invalid PHY address\n", > child->full_name); > continue; > } > > - addr = be32_to_cpup(paddr); > + addr = *paddr; > if (addr >= 32) { > dev_err(&mdio->dev, "%s PHY address %i is too large\n", > child->full_name, addr); > @@ -169,8 +167,7 @@ struct phy_device *of_phy_connect_fixed_link(struct > net_device *dev, > struct device_node *net_np; > char bus_id[MII_BUS_ID_SIZE + 3]; > struct phy_device *phy; > - const __be32 *phy_id; > - int sz; > + u32 *phy_id = NULL; > > if (!dev->dev.parent) > return NULL; > @@ -179,11 +176,10 @@ struct phy_device > *of_phy_connect_fixed_link(struct net_device *dev, > if (!net_np) > return NULL; > > - phy_id = of_get_property(net_np, "fixed-link", &sz); > - if (!phy_id || sz < sizeof(*phy_id)) > + if (of_property_read_u32(net_np, "fixed-link", phy_id)) > return NULL; > > - sprintf(bus_id, PHY_ID_FMT, "0", be32_to_cpu(phy_id[0])); > + sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]); > > phy = phy_connect(dev, bus_id, hndlr, 0, iface); > return IS_ERR(phy) ? NULL : phy; > -- > 1.7.4.1 > > > > > _______________________________________________ > devicetree-discuss mailing list > devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org > https://lists.ozlabs.org/listinfo/devicetree-discuss ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] DT: Use helper function to read u32 values [not found] ` <BANLkTin+WCRrxhOBNoL_AJJAkS-w9ybXqg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2011-07-01 14:22 ` Rob Herring @ 2011-07-01 14:37 ` Grant Likely [not found] ` <BANLkTikSnqPYxhrZv0YrhdZmTC=zrNNDRg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 1 sibling, 1 reply; 4+ messages in thread From: Grant Likely @ 2011-07-01 14:37 UTC (permalink / raw) To: Manjunatha GK Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org", linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On Fri, Jul 1, 2011 at 7:55 AM, Manjunatha GK <manjugk-l0cyMroinI0@public.gmane.org> wrote: > Use helper function of_property_read_u32() in place of of_get_property > and be32_to_cpup() api's for code optimization. > > Compile tested the changes. > > Signed-off-by: G, Manjunath Kondaiah <manjugk-l0cyMroinI0@public.gmane.org> > --- > drivers/of/irq.c | 37 ++++++++++++++++++++++--------------- > drivers/of/of_i2c.c | 8 +++----- > drivers/of/of_mdio.c | 16 ++++++---------- > 3 files changed, 31 insertions(+), 30 deletions(-) > > diff --git a/drivers/of/irq.c b/drivers/of/irq.c > index 9f689f1..13c02e2 100644 > --- a/drivers/of/irq.c > +++ b/drivers/of/irq.c > @@ -59,20 +59,20 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); > struct device_node *of_irq_find_parent(struct device_node *child) > { > struct device_node *p; > - const __be32 *parp; > + u32 *parp = NULL; > > if (!of_node_get(child)) > return NULL; > > do { > - parp = of_get_property(child, "interrupt-parent", NULL); > + of_property_read_u32(child, "interrupt-parent", parp); > if (parp == NULL) > p = of_get_parent(child); Hi Manjunatha. This won't work. You must pass a valid pointer. It needs to be done this way; u32 parp; if (of_property_read_u32(child, "interrupt-parent", &parp) == 0) { ... } else { ... } > else { > if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) > p = of_node_get(of_irq_dflt_pic); > else > - p = of_find_node_by_phandle(be32_to_cpup(parp)); > + p = of_find_node_by_phandle(*parp); > } > of_node_put(child); > child = p; > @@ -100,7 +100,8 @@ int of_irq_map_raw(struct device_node *parent, const > __be32 *intspec, > u32 ointsize, const __be32 *addr, struct of_irq *out_irq) > { > struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; > - const __be32 *tmp, *imap, *imask; > + const __be32 *imap, *imask; > + u32 *tmp; > u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; > int imaplen, match, i; > > @@ -115,9 +116,10 @@ int of_irq_map_raw(struct device_node *parent, const > __be32 *intspec, > * is none, we are nice and just walk up the tree > */ > do { > - tmp = of_get_property(ipar, "#interrupt-cells", NULL); > + tmp = NULL; > + of_property_read_u32(ipar, "#interrupt-cells", tmp); > if (tmp != NULL) { > - intsize = be32_to_cpu(*tmp); > + intsize = *tmp; > break; > } > tnode = ipar; > @@ -139,14 +141,15 @@ int of_irq_map_raw(struct device_node *parent, const > __be32 *intspec, > */ > old = of_node_get(ipar); > do { > - tmp = of_get_property(old, "#address-cells", NULL); > + tmp = NULL; > + of_property_read_u32(old, "#address-cells", tmp); > tnode = of_get_parent(old); > of_node_put(old); > old = tnode; > } while (old && tmp == NULL); > of_node_put(old); > old = NULL; > - addrsize = (tmp == NULL) ? 2 : be32_to_cpu(*tmp); > + addrsize = (tmp == NULL) ? 2 : (*tmp); > > pr_debug(" -> addrsize=%d\n", addrsize); > > @@ -225,14 +228,16 @@ int of_irq_map_raw(struct device_node *parent, const > __be32 *intspec, > /* Get #interrupt-cells and #address-cells of new > * parent > */ > - tmp = of_get_property(newpar, "#interrupt-cells", NULL); > + tmp = NULL; > + of_property_read_u32(newpar, "#interrupt-cells", tmp); > if (tmp == NULL) { > pr_debug(" -> parent lacks #interrupt-cells!\n"); > goto fail; > } > - newintsize = be32_to_cpu(*tmp); > - tmp = of_get_property(newpar, "#address-cells", NULL); > - newaddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp); > + newintsize = *tmp; > + tmp = NULL; > + of_property_read_u32(newpar, "#address-cells", tmp); > + newaddrsize = (tmp == NULL) ? 0 : (*tmp); > > pr_debug(" -> newintsize=%d, newaddrsize=%d\n", > newintsize, newaddrsize); > @@ -284,7 +289,8 @@ EXPORT_SYMBOL_GPL(of_irq_map_raw); > int of_irq_map_one(struct device_node *device, int index, struct of_irq > *out_irq) > { > struct device_node *p; > - const __be32 *intspec, *tmp, *addr; > + const __be32 *intspec, *addr; > + u32 *tmp; > u32 intsize, intlen; > int res = -EINVAL; > > @@ -311,10 +317,11 @@ int of_irq_map_one(struct device_node *device, int > index, struct of_irq *out_irq > return -EINVAL; > > /* Get size of interrupt specifier */ > - tmp = of_get_property(p, "#interrupt-cells", NULL); > + tmp = NULL; > + of_get_property(p, "#interrupt-cells", tmp); > if (tmp == NULL) > goto out; > - intsize = be32_to_cpu(*tmp); > + intsize = *tmp; > > pr_debug(" intsize=%d intlen=%d\n", intsize, intlen); > > diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c > index f37fbeb..7113512 100644 > --- a/drivers/of/of_i2c.c > +++ b/drivers/of/of_i2c.c > @@ -32,8 +32,7 @@ void of_i2c_register_devices(struct i2c_adapter *adap) > for_each_child_of_node(adap->dev.of_node, node) { > struct i2c_board_info info = {}; > struct dev_archdata dev_ad = {}; > - const __be32 *addr; > - int len; > + u32 *addr = NULL; > > dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name); > > @@ -43,14 +42,13 @@ void of_i2c_register_devices(struct i2c_adapter *adap) > continue; > } > > - addr = of_get_property(node, "reg", &len); > - if (!addr || (len < sizeof(int))) { > + if (of_get_property(node, "reg", addr)) { > dev_err(&adap->dev, "of_i2c: invalid reg on %s\n", > node->full_name); > continue; > } > > - info.addr = be32_to_cpup(addr); > + info.addr = *addr; > if (info.addr > (1 << 10) - 1) { > dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n", > info.addr, node->full_name); > diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c > index d35e300..d4b6503 100644 > --- a/drivers/of/of_mdio.c > +++ b/drivers/of/of_mdio.c > @@ -52,19 +52,17 @@ int of_mdiobus_register(struct mii_bus *mdio, struct > device_node *np) > > /* Loop over the child nodes and register a phy_device for each one */ > for_each_child_of_node(np, child) { > - const __be32 *paddr; > u32 addr; > - int len; > + u32 *paddr = NULL; > > /* A PHY must have a reg property in the range [0-31] */ > - paddr = of_get_property(child, "reg", &len); > - if (!paddr || len < sizeof(*paddr)) { > + if (of_property_read_u32(child, "reg", paddr)) { > dev_err(&mdio->dev, "%s has invalid PHY address\n", > child->full_name); > continue; > } > > - addr = be32_to_cpup(paddr); > + addr = *paddr; > if (addr >= 32) { > dev_err(&mdio->dev, "%s PHY address %i is too large\n", > child->full_name, addr); > @@ -169,8 +167,7 @@ struct phy_device *of_phy_connect_fixed_link(struct > net_device *dev, > struct device_node *net_np; > char bus_id[MII_BUS_ID_SIZE + 3]; > struct phy_device *phy; > - const __be32 *phy_id; > - int sz; > + u32 *phy_id = NULL; > > if (!dev->dev.parent) > return NULL; > @@ -179,11 +176,10 @@ struct phy_device *of_phy_connect_fixed_link(struct > net_device *dev, > if (!net_np) > return NULL; > > - phy_id = of_get_property(net_np, "fixed-link", &sz); > - if (!phy_id || sz < sizeof(*phy_id)) > + if (of_property_read_u32(net_np, "fixed-link", phy_id)) > return NULL; > > - sprintf(bus_id, PHY_ID_FMT, "0", be32_to_cpu(phy_id[0])); > + sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]); > > phy = phy_connect(dev, bus_id, hndlr, 0, iface); > return IS_ERR(phy) ? NULL : phy; > -- > 1.7.4.1 > > > -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <BANLkTikSnqPYxhrZv0YrhdZmTC=zrNNDRg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH] DT: Use helper function to read u32 values [not found] ` <BANLkTikSnqPYxhrZv0YrhdZmTC=zrNNDRg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2011-07-01 17:44 ` Manjunatha GK 0 siblings, 0 replies; 4+ messages in thread From: Manjunatha GK @ 2011-07-01 17:44 UTC (permalink / raw) To: Grant Likely Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org", linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r [-- Attachment #1.1: Type: text/plain, Size: 1676 bytes --] Hi Grant, On 1 July 2011 20:07, Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> wrote: > On Fri, Jul 1, 2011 at 7:55 AM, Manjunatha GK <manjugk-l0cyMroinI0@public.gmane.org> wrote: > > Use helper function of_property_read_u32() in place of of_get_property > > and be32_to_cpup() api's for code optimization. > > > > Compile tested the changes. > > > > Signed-off-by: G, Manjunath Kondaiah <manjugk-l0cyMroinI0@public.gmane.org> > > --- > > drivers/of/irq.c | 37 ++++++++++++++++++++++--------------- > > drivers/of/of_i2c.c | 8 +++----- > > drivers/of/of_mdio.c | 16 ++++++---------- > > 3 files changed, 31 insertions(+), 30 deletions(-) > > > > diff --git a/drivers/of/irq.c b/drivers/of/irq.c > > index 9f689f1..13c02e2 100644 > > --- a/drivers/of/irq.c > > +++ b/drivers/of/irq.c > > @@ -59,20 +59,20 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); > > struct device_node *of_irq_find_parent(struct device_node *child) > > { > > struct device_node *p; > > - const __be32 *parp; > > + u32 *parp = NULL; > > > > if (!of_node_get(child)) > > return NULL; > > > > do { > > - parp = of_get_property(child, "interrupt-parent", NULL); > > + of_property_read_u32(child, "interrupt-parent", parp); > > if (parp == NULL) > > p = of_get_parent(child); > > Hi Manjunatha. > > This won't work. You must pass a valid pointer. It needs to be done this > way; > u32 parp; > if (of_property_read_u32(child, "interrupt-parent", &parp) == 0) { > ... > } else { > ... > } > Thanks for the quick catch. I will fix it. -Manjunath [-- Attachment #1.2: Type: text/html, Size: 2421 bytes --] [-- Attachment #2: Type: text/plain, Size: 192 bytes --] _______________________________________________ devicetree-discuss mailing list devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org https://lists.ozlabs.org/listinfo/devicetree-discuss ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-07-01 17:44 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-07-01 13:55 [PATCH] DT: Use helper function to read u32 values Manjunatha GK
[not found] ` <BANLkTin+WCRrxhOBNoL_AJJAkS-w9ybXqg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-07-01 14:22 ` Rob Herring
2011-07-01 14:37 ` Grant Likely
[not found] ` <BANLkTikSnqPYxhrZv0YrhdZmTC=zrNNDRg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-07-01 17:44 ` Manjunatha GK
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).