From: "Cousson, Benoit" <b-cousson@ti.com>
To: grant.likely@secretlab.ca, rob.herring@calxeda.com
Cc: Benoit Cousson <b-cousson@ti.com>,
devicetree-discuss@lists.ozlabs.org, tony@atomide.com,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/3] of: Add support for named irq and reg
Date: Mon, 19 Dec 2011 14:50:49 +0100 [thread overview]
Message-ID: <4EEF4139.3050609@ti.com> (raw)
In-Reply-To: <1323095036-3739-1-git-send-email-b-cousson@ti.com>
Hi Grant and Rob,
Gentle ping: Do you have some comment on that series?
Thanks,
Benoit
On 12/5/2011 3:23 PM, Benoit Cousson wrote:
> Hi Grant& Rob,
>
> Following the previous patch submission [1], here is an updated series
> that adds the support for both reg and irq names.
> A small improvement is done as well on the property with multiple strings
> helper function.
>
> Please note that I've just realized that Russell's concern with the
> /proc/iomem readability might not even be valid in the DT case.
> I might be wrong, but it looks like devices created by of_device_alloc
> does not seems to call the insert_resource. It means that the /proc/iomem
> is mostly empty when the devices are created from device tree blob.
> I'm not sure it was done on purpose, but even if this is not the case,
> the fact is that this /proc/iomem entry does not seems to be used
> extensively.
> That does not mean it cannot be improved, but it should change the urgency
> to fix that with regards to that series.
>
> This series is based on 3.2-rc4 and is available here:
> git://gitorious.org/omap-pm/linux.git for_3.3/resource-names
>
> Comments are welcome.
>
> Auto comment: I'm not super happy with these new properties name because it
> is not really consistent. If you have any better idea, do not hesitate.
>
> Thanks,
> Benoit
>
>
> [1] http://www.mail-archive.com/linux-omap@vger.kernel.org/msg57881.html
>
>
> Benoit Cousson (3):
> of/base: Take NULL string into account for property with multiple strings
> of/address: Add reg-names property to name an iomem resource
> of/irq: Add interrupts-names property to name an irq resource
>
> .../devicetree/bindings/interrupts-names.txt | 50 ++++++++++++++++++++
> Documentation/devicetree/bindings/reg-names.txt | 48 +++++++++++++++++++
> drivers/of/address.c | 16 ++++--
> drivers/of/base.c | 8 +--
> drivers/of/irq.c | 11 ++++-
> 5 files changed, 122 insertions(+), 11 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/interrupts-names.txt
> create mode 100644 Documentation/devicetree/bindings/reg-names.txt
prev parent reply other threads:[~2011-12-19 13:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-05 14:23 [PATCH 0/3] of: Add support for named irq and reg Benoit Cousson
2011-12-05 14:23 ` [PATCH 1/3] of/base: Take NULL string into account for property with multiple strings Benoit Cousson
2011-12-14 18:18 ` Tony Lindgren
2011-12-19 14:02 ` Rob Herring
2012-01-03 14:15 ` Cousson, Benoit
2012-01-04 7:34 ` Grant Likely
2011-12-05 14:23 ` [PATCH 2/3] of/address: Add reg-names property to name an iomem resource Benoit Cousson
2011-12-05 14:23 ` [PATCH 3/3] of/irq: Add interrupts-names property to name an irq resource Benoit Cousson
2012-01-04 7:17 ` Grant Likely
[not found] ` <20120104071749.GA15503-e0URQFbLeQY2iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2012-01-04 14:15 ` Cousson, Benoit
2011-12-19 13:50 ` Cousson, Benoit [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EEF4139.3050609@ti.com \
--to=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=rob.herring@calxeda.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).