devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Vrabel <david.vrabel@citrix.com>
To: Pawel Moll <pawel.moll@arm.com>
Cc: devicetree-discuss@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 9/9] ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant)
Date: Tue, 10 Jan 2012 14:21:16 +0000	[thread overview]
Message-ID: <4F0C495C.4000103@citrix.com> (raw)
In-Reply-To: <1323957761-13553-10-git-send-email-pawel.moll@arm.com>

On 15/12/11 14:02, Pawel Moll wrote:
> This patch adds Device Tree file for the CoreTile Express A15x2
> (V2P-CA15) with Test Chip 1.

This doesn't work as-is with the software model as accessing some of the
peripherals that aren't modeled will cause an exception.  Is it worth
having a device tree file suitable for the models? Or are the models too
configurable for this to be workable?

> As the chip's GIC has 160 interrupt inputs and equivalent SMM
> (FPGA) has GIC synthesised with 256 interrupts, NR_IRQS is
> increased.
> 
[...]
> --- /dev/null
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
[...]
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x40000000>;
> +	};

If CONFIG_ARM_ATAG_DTB_COMPAT is enabled the device tree will end up
with two nodes describing the memory ("memory" and "memory@80000000" in
this case).

>From 22cc6a3410077b99d81e42c4d7f4e29eab6070e3 Mon Sep 17 00:00:00 2001
From: David Vrabel <david.vrabel@citrix.com>
Date: Mon, 9 Jan 2012 16:13:19 +0000
Subject: [PATCH] ARM: vexpress: rename device tree "memory@..." nodes to
"memory"

If CONFIG_ARM_ATAG_DTB_COMPAT enabled it expects the memory
information to be in a node named "memory".  If the memory is
described in a different node, the device tree will end up with two
nodes describing the memory.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
---
 arch/arm/boot/dts/vexpress-v2p-aem-v7a.dts  |    2 +-
 arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts |    2 +-
 arch/arm/boot/dts/vexpress-v2p-ca5s.dts     |    2 +-
 arch/arm/boot/dts/vexpress-v2p-ca9.dts      |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/vexpress-v2p-aem-v7a.dts
b/arch/arm/boot/dts/vexpress-v2p-aem-v7a.dts
index 064132e..6667936 100644
--- a/arch/arm/boot/dts/vexpress-v2p-aem-v7a.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-aem-v7a.dts
@@ -33,7 +33,7 @@
 		};
 	};

-	memory@80000000 {
+	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 02cada5..0d82ac8 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -43,7 +43,7 @@
 		};
 	};

-	memory@80000000 {
+	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index da26a13..e4c3935 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -45,7 +45,7 @@
 		};
 	};

-	memory@80000000 {
+	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 84542e7..d4aa1cc 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -59,7 +59,7 @@
 		};
 	};

-	memory@60000000 {
+	memory {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
-- 
1.7.2.5

David

  reply	other threads:[~2012-01-10 14:21 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-15 14:02 [PATCH v6 0/9] Versatile Express DT support Pawel Moll
2011-12-15 14:02 ` [PATCH v6 1/9] ARM: versatile: Add missing ENDPROC to headsmp.S Pawel Moll
2011-12-15 14:02 ` [PATCH v6 2/9] ARM: vexpress: Get rid of MMIO_P2V Pawel Moll
2011-12-15 14:02 ` [PATCH v6 3/9] ARM: versatile: Map local timers using Device Tree when possible Pawel Moll
     [not found]   ` <1323957761-13553-4-git-send-email-pawel.moll-5wv7dgnIgG8@public.gmane.org>
2011-12-15 14:53     ` Rob Herring
2011-12-15 15:25       ` Pawel Moll
2011-12-15 17:25         ` Pawel Moll
2011-12-15 14:02 ` [PATCH v6 4/9] ARM: vexpress: Use FDT data in platform SMP calls Pawel Moll
2011-12-15 14:02 ` [PATCH v6 5/9] ARM: vexpress: Add Device Tree support Pawel Moll
2012-01-10 11:13   ` Jon Medhurst (Tixy)
2011-12-15 14:02 ` [PATCH v6 6/9] ARM: vexpress: Motherboard RS1 memory map support Pawel Moll
2012-01-04 16:35   ` David Vrabel
2012-01-19 13:21     ` Pawel Moll
     [not found]       ` <1326979266.32197.60.camel-okZbbLrgpR/YkXV2EHHjLW3o5bpOHsLO@public.gmane.org>
2012-01-19 16:46         ` David Vrabel
2012-01-19 17:31           ` Pawel Moll
2012-01-27 14:02           ` Pawel Moll
     [not found]             ` <1327672960.24701.55.camel-okZbbLrgpR/YkXV2EHHjLW3o5bpOHsLO@public.gmane.org>
2012-01-30 17:32               ` Dave Martin
2012-01-30 17:26         ` Dave Martin
2011-12-15 14:02 ` [PATCH v6 7/9] ARM: vexpress: Add Device Tree for V2P-CA5s core tile Pawel Moll
2011-12-15 14:02 ` [PATCH v6 8/9] ARM: vexpress: Add Device Tree for V2P-CA9 " Pawel Moll
2011-12-15 14:02 ` [PATCH v6 9/9] ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant) Pawel Moll
2012-01-10 14:21   ` David Vrabel [this message]
2012-01-19 13:27     ` Pawel Moll
     [not found]       ` <1326979652.32197.66.camel-okZbbLrgpR/YkXV2EHHjLW3o5bpOHsLO@public.gmane.org>
2012-01-19 13:34         ` Rob Herring
2012-01-19 13:43           ` Pawel Moll
     [not found]             ` <1326980594.32197.67.camel-okZbbLrgpR/YkXV2EHHjLW3o5bpOHsLO@public.gmane.org>
2012-01-19 14:01               ` Rob Herring
2012-01-19 14:51                 ` Pawel Moll
     [not found]                   ` <1326984672.32197.68.camel-okZbbLrgpR/YkXV2EHHjLW3o5bpOHsLO@public.gmane.org>
2012-01-19 17:00                     ` David Vrabel
     [not found]                       ` <4F184C48.2050505-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org>
2012-01-19 17:11                         ` Russell King - ARM Linux
2012-01-19 17:27                       ` Pawel Moll
     [not found]                         ` <1326994035.13748.7.camel-okZbbLrgpR/YkXV2EHHjLW3o5bpOHsLO@public.gmane.org>
2012-01-19 17:50                           ` Russell King - ARM Linux
     [not found]                             ` <20120119175053.GE10404-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2012-01-19 17:59                               ` Grant Likely
2012-01-19 18:09                                 ` Nicolas Pitre
     [not found]                                   ` <alpine.LFD.2.02.1201191305180.19587-QuJgVwGFrdf/9pzu0YdTqQ@public.gmane.org>
2012-01-19 22:07                                     ` Grant Likely
2012-01-25 17:43                       ` Pawel Moll
     [not found]                         ` <1327513396.2355.28.camel-okZbbLrgpR/YkXV2EHHjLW3o5bpOHsLO@public.gmane.org>
2012-01-30 17:42                           ` Dave Martin
     [not found]                             ` <20120130174212.GH2248-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2012-01-30 21:31                               ` Grant Likely
     [not found]                                 ` <20120130213115.GA22611-e0URQFbLeQY2iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2012-01-31 11:50                                   ` Dave Martin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F0C495C.4000103@citrix.com \
    --to=david.vrabel@citrix.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=pawel.moll@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).