From mboxrd@z Thu Jan 1 00:00:00 1970 From: Aneesh V Subject: Re: [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR Date: Tue, 17 Jan 2012 17:36:16 +0530 Message-ID: <4F156438.20502@ti.com> References: <1324303533-17458-1-git-send-email-aneesh@ti.com> <4EEFC23A.30201@gmail.com> <20111219233559.GW6464@atomide.com> <4EF0671B.7090508@ti.com> <4EF0824A.9060208@ti.com> <4EF096C9.1070808@ti.com> <4F09D10B.7010807@ti.com> <4F1087C9.6030908@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4F1087C9.6030908@ti.com> Sender: linux-omap-owner@vger.kernel.org To: Olof Johansson Cc: "Cousson, Benoit" , Tony Lindgren , Rob Herring , devicetree-discuss@lists.ozlabs.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Vishwanath Sripathy , Mike Turquette , grant.likely@secretlab.ca List-Id: devicetree@vger.kernel.org Hi Olof, On Saturday 14 January 2012 01:06 AM, Aneesh V wrote: > Hi Olof, > We wish to drop the DDR3 support because we have concluded that our > platforms with DDR3 memories will not scale DDR frequency due to > limitations in DDR3 protocol(operating frequency can vary only in a > small range). So, is it ok to persist with my bindings for LPDDR2 > (fixing the comments already given by you) and drop the DDR3 part > from it? Ping! Forgive my impatience, but I would like to close on this at the earliest to continue my work on the driver. thanks, Aneesh