From: Rajendra Nayak <rnayak@ti.com>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: broonie@opensource.wolfsonmicro.com,
devicetree-discuss@lists.ozlabs.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, tony@atomide.com,
lrg@ti.com, b-cousson@ti.com, patches@linaro.org,
linaro-dev@lists.linaro.org
Subject: Re: [PATCH v3 0/2] Device tree support for TWL regulators
Date: Mon, 27 Feb 2012 18:01:20 +0530 [thread overview]
Message-ID: <4F4B7798.6000300@ti.com> (raw)
In-Reply-To: <4F4B73C8.8070807@ti.com>
On Monday 27 February 2012 05:45 PM, Peter Ujfalusi wrote:
> Hi Rajendra,
>
>
> On 02/27/2012 12:35 PM, Rajendra Nayak wrote:
>> Re-sending on top of Tero's changes which are already
>> in -next and the one which adds support for twl6030
>> vdd1/2/3 SMPS [1].
>
> Would you be able to add support for V1V8, V2V1 SMPS supplies in
> twl6030? These regulators are need on SDP4430, and PandaBoards for the
> twl6040 audio codec.
> I have sent a series to add this support:
> http://marc.info/?l=linux-omap&m=132886849202915&w=2
Sure, seems quite straight forward to add DT support for those
too. I just based my patches on top of whats already in -next and
some changes from Tero. Did not notice there are more patches floating
around touching twl-regulator :)
Depending on what order Mark happens to pull them in, I am fine
re-sending adding support for the 2 twl6030 fixed regulators.
>
> Thanks,
> Péter
>
>
>> v3 has mainly 2 differences from v2
>> -1- TWL driver now uses just one table for both dt and
>> non-dt based lookup for driver data.
>> -2- All common regulator nodes for twl4030 and twl6030 are
>> now defined in the twl4030.dtsi and twl6030.dtsi instead of
>> repeating the nodes in all board files, which also means
>> the patch ('arm/dts: twl: Pass regulator data from dt')
>> has a dependency with the series from Benoit which adds the
>> twl4030.dtsi and twl6030.dtsi files[2].
>>
>> I have tested the patches on omap4panda and omap3beagle boards.
>>
>> [1] http://marc.info/?l=linux-omap&m=133009693905864&w=2
>> [2] git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
>> for_3.4/dt_i2c_twl
>>
>> Rajendra Nayak (2):
>> regulator: twl: adapt twl-regulator driver to dt
>> arm/dts: twl: Pass regulator data from dt
>>
>> .../bindings/regulator/twl-regulator.txt | 66 +++++
>> arch/arm/boot/dts/omap3-beagle.dts | 6 +
>> arch/arm/boot/dts/twl4030.dtsi | 18 ++
>> arch/arm/boot/dts/twl6030.dtsi | 60 +++++
>> drivers/regulator/twl-regulator.c | 259 +++++++++++++-------
>> 5 files changed, 322 insertions(+), 87 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/regulator/twl-regulator.txt
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-02-27 12:31 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-27 10:35 [PATCH v3 0/2] Device tree support for TWL regulators Rajendra Nayak
2012-02-27 10:36 ` [PATCH v3 1/2] regulator: twl: adapt twl-regulator driver to dt Rajendra Nayak
2012-02-27 10:36 ` [PATCH v3 2/2] arm/dts: twl: Pass regulator data from dt Rajendra Nayak
2012-02-27 12:15 ` [PATCH v3 0/2] Device tree support for TWL regulators Peter Ujfalusi
2012-02-27 12:31 ` Rajendra Nayak [this message]
2012-02-27 13:41 ` Mark Brown
2012-02-27 13:52 ` Cousson, Benoit
2012-02-27 14:03 ` Mark Brown
[not found] ` <20120227140356.GF3191-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2012-02-27 14:21 ` Cousson, Benoit
[not found] ` <4F4B9166.7020909-l0cyMroinI0@public.gmane.org>
2012-02-27 14:53 ` Mark Brown
2012-02-28 5:41 ` Rajendra Nayak
2012-02-28 10:18 ` Mark Brown
2012-02-27 22:17 ` Grant Likely
[not found] ` <CACxGe6vU2dSpRrqd2y=ssgVsWuwpuvFtja9YcUAQA_ETWcwCYg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2012-02-27 22:24 ` Cousson, Benoit
-- strict thread matches above, loose matches on Subject: below --
2012-02-23 11:35 Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F4B7798.6000300@ti.com \
--to=rnayak@ti.com \
--cc=b-cousson@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linaro-dev@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@ti.com \
--cc=patches@linaro.org \
--cc=peter.ujfalusi@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).