Re: [PATCH V4 2/2] staging: iio: add driver for isl29028

[Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]

On Thursday 12 April 2012 08:04 PM, Jonathan Cameron wrote:
> On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
>> Intersil's ISL29028 is concurrent Ambient Light and
>> Proximity Sensor device.
>> Add driver to access the light and IR intensity and
>> proximity value via iio interface.
> Very nearly there.  The available attributes need to match naming
> of what they are providing values for. (we need a better way of handling
> these but that's a job for another day).
>
> Otherwise, all good.

Fine, I will do change.

>> +     mutex_unlock(&chip->lock);
>> +     return ret;
>> +}
>> +
>> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
>> +                             "1, 3, 5, 10, 13, 20, 83, 100");
>> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
>> +
>> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
>> +#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
>> +static struct attribute *isl29028_attributes[] = {
>> +     ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
> tiny disconnect now that you have in_proximity0_sampling frequency, this
> should be in_proximity0_sampling_frequency_available
>

I saw the attribute appear as
in_illuminance_input
in_illuminance_scale
in_intensity_raw
in_proximity_raw
in_proximity_sampling_frequency


As I have not set  the .indexed to non-zero,  I will go as non-indexd 
name like
in_proximity_sampling_frequency_available.

>> +     ISL29028_CONST_ATTR(illuminance_scale_available),
> snap here (sorry, missed that last time).
>
> in_illuminance0_scale_available
>

I think should be in_illuminance_scale_available