From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Warren Subject: Re: [PATCH] leds: Add DT support for leds-pca9532 Date: Sun, 17 Jun 2012 12:02:55 -0600 Message-ID: <4FDE1BCF.60109@wwwdotorg.org> References: <1339855851-9171-1-git-send-email-stigge@antcom.de> <4FDCA0FC.5000409@wwwdotorg.org> <4FDDC4A9.1040706@antcom.de> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4FDDC4A9.1040706@antcom.de> Sender: linux-kernel-owner@vger.kernel.org To: Roland Stigge Cc: riku.voipio@iki.fi, bryan.wu@canonical.com, rpurdie@rpsys.net, linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, aletes.xgr@gmail.com, linux-arm-kernel@lists.infradead.org, Thierry Reding List-Id: devicetree@vger.kernel.org On 06/17/2012 05:51 AM, Roland Stigge wrote: > Hi, > > On 16/06/12 17:06, Stephen Warren wrote: >>> +- nxp,typecodes: groups of 2 bits for each of the 16 pins: >>> + 0: None >>> + 1: LED >>> + 2: Beep >>> + 3: GPIO >>> +- nxp,statecodes: groups of 2 bits for each of the 16 pins: >>> + 0: off >>> + 1: on >>> + 2: pwm0 >>> + 3: pwm1 >>> + >>> +Optional properties: >>> +- nxp,psc: array of 2 numbers: PSC values for the two PWM channels (see datasheet) >>> +- nxp,pwm: array of 2 numbers: PWM values for the two PWM channels (see datasheet) >> >> Shouldn't that all be exposed using a combination of the pinctrl >> bindings that are in 3.5, and the PWM bindings that should be coming in 3.6? > > Thanks for the note! I found a pwm tree that should have this at > > http://gitorious.org/linux-pwm/linux-pwm > > but it gives me server errors. Is there a place where I can have a look? That URL (with http:// replace with git://) did work for me. It seemed a little slow at first, but did work without issue. I Cc'd Thierry in case there's any other location available.