From: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>,
Alessandro Zummo
<a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc
Date: Fri, 29 Jun 2012 13:08:17 +0200 [thread overview]
Message-ID: <4FED8CA1.5000800@pengutronix.de> (raw)
In-Reply-To: <20120625043711.GA18156-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
[-- Attachment #1.1: Type: text/plain, Size: 4451 bytes --]
On 06/25/2012 06:37 AM, Shawn Guo wrote:
> On Fri, Jun 08, 2012 at 08:56:44PM +0200, Marek Vasut wrote:
>> Add simple binding for the stmp3xxx-rtc.
>>
>> Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
>> Cc: Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>
>
> Hi Alessandro,
>
> The patch has some changes on arch/arm/boot/dts/imx28.dtsi, and also we
> need the patch to convert some board files over to device tree. May I
> have your ack to queue the patch on my tree?
The interrupt numbers are not as the driver expects them..
>
> Regards,
> Shawn
>
>> Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
>> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
>> Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
>> Cc: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
>> Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> ---
>> .../devicetree/bindings/rtc/stmp3xxx-rtc.txt | 19 +++++++++++++++++++
>> arch/arm/boot/dts/imx28.dtsi | 1 +
>> drivers/rtc/rtc-stmp3xxx.c | 7 +++++++
>> 3 files changed, 27 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
>>
>> V2: Fix typos, remove fsl,imx28-rtc
>>
>> diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
>> new file mode 100644
>> index 0000000..a7a7de5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
>> @@ -0,0 +1,19 @@
>> +* STMP3xxx/i.MX28 Time Clock controller
>> +
>> +Required properties:
>> +- compatible: should be one of the following.
>> + * "fsl,stmp3xxx-rtc"
>> +- reg: physical base address of the controller and length of memory mapped
>> + region.
>> +- interrupts: Two interrupt numbers to the cpu should be specified. First
>> + interrupt number is the rtc tick interrupt and second interrupt number
>> + is the rtc alarm interrupt. The number of cells representing a interrupt
>> + depends on the parent interrupt controller.
The driver expects the first interrupt to the the alarm interrupt, the
event interrupt is not use, yet.
>> +
>> +Example:
>> +
>> + rtc@80056000 {
>> + compatible = "fsl,stmp3xxx-rtc";
>> + reg = <0x80056000 2000>;
>> + interrupts = <28 29>;
>> + };
>> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
>> index cabcce8..5053019 100644
>> --- a/arch/arm/boot/dts/imx28.dtsi
>> +++ b/arch/arm/boot/dts/imx28.dtsi
>> @@ -387,6 +387,7 @@
>> };
>>
>> rtc@80056000 {
>> + compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
>> reg = <0x80056000 2000>;
>> interrupts = <28 29>;
should be:
<29 28>
>> status = "disabled";
>> diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
>> index 1028786..3aadb58 100644
>> --- a/drivers/rtc/rtc-stmp3xxx.c
>> +++ b/drivers/rtc/rtc-stmp3xxx.c
>> @@ -25,6 +25,7 @@
>> #include <linux/interrupt.h>
>> #include <linux/rtc.h>
>> #include <linux/slab.h>
>> +#include <linux/of_device.h>
>>
>> #include <mach/common.h>
>>
>> @@ -265,6 +266,11 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev)
>> #define stmp3xxx_rtc_resume NULL
>> #endif
>>
>> +static const struct of_device_id rtc_dt_ids[] = {
>> + { .compatible = "fsl,stmp3xxx-rtc", },
>> + { /* sentinel */ }
>> +};
>> +
>> static struct platform_driver stmp3xxx_rtcdrv = {
>> .probe = stmp3xxx_rtc_probe,
>> .remove = stmp3xxx_rtc_remove,
>> @@ -273,6 +279,7 @@ static struct platform_driver stmp3xxx_rtcdrv = {
>> .driver = {
>> .name = "stmp3xxx-rtc",
>> .owner = THIS_MODULE,
>> + .of_match_table = rtc_dt_ids,
>> },
>> };
>>
>> --
>> 1.7.10
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
[-- Attachment #2: Type: text/plain, Size: 192 bytes --]
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
next prev parent reply other threads:[~2012-06-29 11:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-08 18:56 [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc Marek Vasut
[not found] ` <1339181804-22822-1-git-send-email-marex-ynQEQJNshbs@public.gmane.org>
2012-06-08 18:58 ` Rob Herring
2012-06-11 3:53 ` Shawn Guo
2012-06-25 4:37 ` Shawn Guo
[not found] ` <20120625043711.GA18156-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2012-06-29 11:08 ` Marc Kleine-Budde [this message]
[not found] ` <4FED8CA1.5000800-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-06-29 11:30 ` Shawn Guo
[not found] ` <20120629113047.GD29197-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2012-06-29 11:32 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FED8CA1.5000800@pengutronix.de \
--to=mkl-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=marex-ynQEQJNshbs@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).