From: Krzysztof Kozlowski <krzk@kernel.org>
To: Gary Yang <gary.yang@cixtech.com>,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
p.zabel@pengutronix.de, peter.chen@cixtech.com,
unicorn_wang@outlook.com, inochiama@gmail.com, alchark@gmail.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
cix-kernel-upstream@cixtech.com
Subject: Re: [PATCH v8 1/3] dt-bindings: soc: cix: document the simple-mfd syscon on Sky1 SoC
Date: Mon, 9 Feb 2026 12:34:04 +0100 [thread overview]
Message-ID: <4a26d89a-95ca-4888-aaea-876b9612d006@kernel.org> (raw)
In-Reply-To: <20260209093344.2013693-2-gary.yang@cixtech.com>
On 09/02/2026 10:33, Gary Yang wrote:
> There are two system control on Cix sky1 Soc. One is located in S0 domain,
> and the other is located in S0 and S5 domain. The system control contains
> resets, usb typeC and more. At this point, only the reset controller child
> is described as usb typeC uses it by phandle.
>
> Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Subject is not correct now. There is no simple-mfd. There should not be
even syscon, because it is Linux term. Just use the name of this device.
> ---
> .../soc/cix/cix,sky1-system-control.yaml | 42 +++++
> include/dt-bindings/reset/cix,sky1-rst-fch.h | 42 +++++
> include/dt-bindings/reset/cix,sky1-rst.h | 164 ++++++++++++++++++
> 3 files changed, 248 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml
> create mode 100644 include/dt-bindings/reset/cix,sky1-rst-fch.h
> create mode 100644 include/dt-bindings/reset/cix,sky1-rst.h
>
> diff --git a/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml
> new file mode 100644
> index 000000000000..5507deb54ebd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml
> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/cix/cix,sky1-system-control.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cix Sky1 SoC system control register region
> +
> +maintainers:
> + - Gary Yang <gary.yang@cixtech.com>
> +
> +description:
> + An wide assortment of registers of the system controller on Sky1 SoC,
> + including resets, usb, wakeup sources and so on.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - cix,sky1-system-control
> + - cix,sky1-s5-system-control
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + '#reset-cells':
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + syscon@16000000 {
> + compatible = "cix,sky1-s5-system-control", "syscon";
> + reg = <0x16000000 0x1000>;
> + #reset-cells = <1>;
> + };
> diff --git a/include/dt-bindings/reset/cix,sky1-rst-fch.h b/include/dt-bindings/reset/cix,sky1-rst-fch.h
Filename must match compatible.
I am pretty sure I gave such feedback to Cix before....
Best regards,
Krzysztof
next prev parent reply other threads:[~2026-02-09 11:34 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-09 9:33 [PATCH v8 0/3] Add support for Cix Sky1 resets Gary Yang
2026-02-09 9:33 ` [PATCH v8 1/3] dt-bindings: soc: cix: document the simple-mfd syscon on Sky1 SoC Gary Yang
2026-02-09 10:11 ` Philipp Zabel
2026-02-09 11:34 ` Krzysztof Kozlowski [this message]
2026-02-10 3:37 ` 回复: " Gary Yang
2026-02-10 7:32 ` Krzysztof Kozlowski
2026-02-10 8:57 ` 回复: " Gary Yang
2026-02-09 9:33 ` [PATCH v8 2/3] reset: add Sky1 soc reset support Gary Yang
2026-02-09 11:30 ` Philipp Zabel
2026-02-11 1:56 ` 回复: " Gary Yang
2026-02-11 10:22 ` Philipp Zabel
2026-02-20 12:50 ` 回复: " Gary Yang
2026-02-09 11:35 ` Krzysztof Kozlowski
2026-02-10 9:19 ` 回复: " Gary Yang
2026-02-09 9:33 ` [PATCH v8 3/3] arm64: dts: cix: add support for cix sky1 resets Gary Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4a26d89a-95ca-4888-aaea-876b9612d006@kernel.org \
--to=krzk@kernel.org \
--cc=alchark@gmail.com \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gary.yang@cixtech.com \
--cc=inochiama@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=peter.chen@cixtech.com \
--cc=robh@kernel.org \
--cc=unicorn_wang@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox