* [PATCH] arm64: dts: qcom: sm6115: Add smp2p nodes
@ 2023-01-21 20:04 Bhupesh Sharma
2023-01-23 16:57 ` Konrad Dybcio
2023-02-09 4:22 ` Bjorn Andersson
0 siblings, 2 replies; 3+ messages in thread
From: Bhupesh Sharma @ 2023-01-21 20:04 UTC (permalink / raw)
To: linux-arm-msm
Cc: agross, andersson, konrad.dybcio, linux-kernel, bhupesh.linux,
bhupesh.sharma, robh+dt, devicetree
Add the adsp, cdsp and modem smp2p nodes to sm6115.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
arch/arm64/boot/dts/qcom/sm6115.dtsi | 72 ++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 50cb8a82ecd5..3c66f998a81b 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -345,6 +345,78 @@ rpmpd_opp_turbo_plus: opp8 {
};
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+
+ interrupts = <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 30>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
--
2.38.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: qcom: sm6115: Add smp2p nodes
2023-01-21 20:04 [PATCH] arm64: dts: qcom: sm6115: Add smp2p nodes Bhupesh Sharma
@ 2023-01-23 16:57 ` Konrad Dybcio
2023-02-09 4:22 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Konrad Dybcio @ 2023-01-23 16:57 UTC (permalink / raw)
To: Bhupesh Sharma, linux-arm-msm
Cc: agross, andersson, linux-kernel, bhupesh.linux, robh+dt,
devicetree
On 21.01.2023 21:04, Bhupesh Sharma wrote:
> Add the adsp, cdsp and modem smp2p nodes to sm6115.
>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 72 ++++++++++++++++++++++++++++
> 1 file changed, 72 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 50cb8a82ecd5..3c66f998a81b 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -345,6 +345,78 @@ rpmpd_opp_turbo_plus: opp8 {
> };
> };
>
> + smp2p-adsp {
> + compatible = "qcom,smp2p";
> + qcom,smem = <443>, <429>;
> +
> + interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&apcs_glb 10>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <2>;
> +
> + adsp_smp2p_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + adsp_smp2p_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-cdsp {
> + compatible = "qcom,smp2p";
> + qcom,smem = <94>, <432>;
> +
> + interrupts = <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&apcs_glb 30>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <5>;
> +
> + cdsp_smp2p_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + cdsp_smp2p_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-mpss {
> + compatible = "qcom,smp2p";
> + qcom,smem = <435>, <428>;
> +
> + interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&apcs_glb 14>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <1>;
> +
> + modem_smp2p_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + modem_smp2p_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> soc: soc@0 {
> compatible = "simple-bus";
> #address-cells = <1>;
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: qcom: sm6115: Add smp2p nodes
2023-01-21 20:04 [PATCH] arm64: dts: qcom: sm6115: Add smp2p nodes Bhupesh Sharma
2023-01-23 16:57 ` Konrad Dybcio
@ 2023-02-09 4:22 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2023-02-09 4:22 UTC (permalink / raw)
To: Bhupesh Sharma, linux-arm-msm
Cc: konrad.dybcio, agross, devicetree, robh+dt, linux-kernel,
bhupesh.linux
On Sun, 22 Jan 2023 01:34:54 +0530, Bhupesh Sharma wrote:
> Add the adsp, cdsp and modem smp2p nodes to sm6115.
>
>
Applied, thanks!
[1/1] arm64: dts: qcom: sm6115: Add smp2p nodes
commit: 77b1278ed0caa484f84b2c4a2d184a56ababfbcd
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-02-09 4:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-01-21 20:04 [PATCH] arm64: dts: qcom: sm6115: Add smp2p nodes Bhupesh Sharma
2023-01-23 16:57 ` Konrad Dybcio
2023-02-09 4:22 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).