From: "Nuno Sá" <noname.nuno@gmail.com>
To: Antoniu Miclaus <antoniu.miclaus@analog.com>,
jic23@kernel.org, robh@kernel.org, conor+dt@kernel.org,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 06/10] iio: adc: adi-axi-adc: add data align process
Date: Mon, 12 May 2025 07:54:27 +0100 [thread overview]
Message-ID: <4b2a5e563bcd867c0f85e4ac34630ec8161707fa.camel@gmail.com> (raw)
In-Reply-To: <20250509105019.8887-7-antoniu.miclaus@analog.com>
On Fri, 2025-05-09 at 13:50 +0300, Antoniu Miclaus wrote:
> Add support for starting the sync process used for data
> capture alignment.
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
> changes in v5:
> - use regmap_read_poll_timeout
> drivers/iio/adc/adi-axi-adc.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
> index 2a3a6c3f5e59..f9c4018e3b41 100644
> --- a/drivers/iio/adc/adi-axi-adc.c
> +++ b/drivers/iio/adc/adi-axi-adc.c
> @@ -44,6 +44,7 @@
> #define ADI_AXI_ADC_REG_CONFIG_CMOS_OR_LVDS_N BIT(7)
>
> #define ADI_AXI_ADC_REG_CTRL 0x0044
> +#define ADI_AXI_ADC_CTRL_SYNC_MSK BIT(3)
> #define ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK BIT(1)
>
> #define ADI_AXI_ADC_REG_CNTRL_3 0x004c
> @@ -54,6 +55,9 @@
> #define AXI_AD485X_PACKET_FORMAT_32BIT 0x2
> #define AXI_AD408X_CNTRL_3_FILTER_EN_MSK BIT(0)
>
> +#define ADI_AXI_ADC_REG_SYNC_STATUS 0x0068
> +#define ADI_AXI_ADC_SYNC_STATUS_ADC_SYNC_MSK BIT(0)
> +
> #define ADI_AXI_ADC_REG_DRP_STATUS 0x0074
> #define ADI_AXI_ADC_DRP_LOCKED BIT(17)
>
> @@ -416,6 +420,25 @@ static int axi_adc_ad408x_filter_type_set(struct iio_backend
> *back,
> AXI_AD408X_CNTRL_3_FILTER_EN_MSK);
> }
>
> +static int axi_adc_ad408x_interface_data_align(struct iio_backend *back,
> + u32 timeout_us)
> +{
> + struct adi_axi_adc_state *st = iio_backend_get_priv(back);
> + bool sync_en;
> + u32 val;
> + int ret;
> +
> + ret = regmap_set_bits(st->regmap, ADI_AXI_ADC_REG_CTRL,
> + ADI_AXI_ADC_CTRL_SYNC_MSK);
> + if (ret)
> + return ret;
> +
> + return regmap_read_poll_timeout(st->regmap, ADI_AXI_ADC_REG_SYNC_STATUS,
> + val,
> + FIELD_GET(ADI_AXI_ADC_SYNC_STATUS_ADC_SYNC
> _MSK, val),
> + 1, timeout_us);
> +}
> +
> static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
> struct iio_dev *indio_dev)
> {
> @@ -605,6 +628,7 @@ static const struct iio_backend_ops adi_ad408x_ops = {
> .free_buffer = axi_adc_free_buffer,
> .data_sample_trigger = axi_adc_data_sample_trigger,
> .filter_type_set = axi_adc_ad408x_filter_type_set,
> + .interface_data_align = axi_adc_ad408x_interface_data_align,
> .debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access),
> .debugfs_print_chan_status =
> iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status),
> };
next prev parent reply other threads:[~2025-05-12 7:54 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-09 10:50 [PATCH v5 00/10] Add support for AD4080 ADC Antoniu Miclaus
2025-05-09 10:50 ` [PATCH v5 01/10] iio: backend: add support for filter config Antoniu Miclaus
2025-05-09 10:50 ` [PATCH v5 02/10] iio: backend: add support for data alignment Antoniu Miclaus
2025-05-12 6:53 ` Nuno Sá
2025-05-09 10:50 ` [PATCH v5 03/10] iio: backend: add support for number of lanes Antoniu Miclaus
2025-05-09 10:50 ` [PATCH v5 04/10] dt-bindings: iio: adc: add ad408x axi variant Antoniu Miclaus
2025-05-09 10:50 ` [PATCH v5 05/10] iio: adc: adi-axi-adc: add filter type config Antoniu Miclaus
2025-05-09 10:50 ` [PATCH v5 06/10] iio: adc: adi-axi-adc: add data align process Antoniu Miclaus
2025-05-12 6:54 ` Nuno Sá [this message]
2025-05-09 10:50 ` [PATCH v5 07/10] iio: adc: adi-axi-adc: add num lanes support Antoniu Miclaus
2025-05-09 10:50 ` [PATCH v5 08/10] dt-bindings: iio: adc: add ad4080 Antoniu Miclaus
2025-05-09 10:50 ` [PATCH v5 09/10] iio: adc: ad4080: add driver support Antoniu Miclaus
2025-05-12 6:59 ` Nuno Sá
2025-05-12 15:09 ` David Lechner
2025-05-09 10:50 ` [PATCH v5 10/10] Documetation: ABI: add sinc1 and sinc5+pf1 filter Antoniu Miclaus
2025-05-12 14:15 ` David Lechner
2025-05-11 14:40 ` [PATCH v5 00/10] Add support for AD4080 ADC Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4b2a5e563bcd867c0f85e4ac34630ec8161707fa.camel@gmail.com \
--to=noname.nuno@gmail.com \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox