From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: Re: [PATCH v6 0/3] Stingray thermal driver support Date: Fri, 8 Mar 2019 10:44:15 -0800 Message-ID: <4b8324a6-1d02-983c-7d4c-d824b57d8675@gmail.com> References: <1546505734-24527-1-git-send-email-srinath.mannam@broadcom.com> <20190205235811.GA19687@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Srinath Mannam , Eduardo Valentin Cc: Ray Jui , Daniel Lezcano , Zhang Rui , Rob Herring , Mark Rutland , devicetree@vger.kernel.org, Linux Kernel Mailing List , BCM Kernel Feedback , linux-pm@vger.kernel.org List-Id: devicetree@vger.kernel.org On 2/14/19 8:20 PM, Srinath Mannam wrote: > Hi Eduardo, > > Could you please provide your review comments? So it sounds like this driver was included in a pull request to Linus for 5.1 [1], although I did not see a response to that patch series, which would have helped synchronize the Device Tree changes and send them to Linus as well... I will see if the ARM SoC folks will accept a late request, most likely they would not. Eduardo, can you include replies to patches when you applies those to your tree that way we know whether/when to take the corresponding DTS changes? Thank you. [1]: https://git.kernel.org/torvalds/c/9f24a81e2e5daf8820c8654afcd8512e797c41f2 > > Regards, > Srinath. > > On Wed, Feb 6, 2019 at 5:28 AM Eduardo Valentin wrote: >> >> Hello, >> >> On Mon, Feb 04, 2019 at 04:16:19PM -0800, Ray Jui wrote: >>> Hi Zhang/Eduardo, >>> >>> Can this patch series be merged? It looks like Srinath has addressed all >>> review comments? >> >> I will take a look. Side note, thermal patches are reviewed on >> linux-pm@vger.kernel.org. Copying that list it does help because that >> is how the patches get assigned in patchwork.kernel.org. >> >>> >>> The following tag should be added to the binding document patch: >>> >>> Reviewed-by: Rob Herring >>> >>> Thanks, >>> >>> Ray >>> >>> On 1/3/2019 12:55 AM, Srinath Mannam wrote: >>>> These patches adds the stingray thermal driver and its >>>> corresponding DT nodes with documentation. >>>> >>>> Changes from v5 >>>> - Addressed Eduardo Valentin comments. >>>> >>>> Changes from v4 >>>> - Addressed Rob Herring comments on DT parameters and >>>> thermal driver architecture. >>>> - Removed brcm,max-crit-temp DT parameter >>>> - Changed driver to thermal sensor registration model. >>>> - Added trip DT properties. >>>> >>>> Changes from v3 >>>> - Addressed Daniel lezcano comments. >>>> - Elaborated commit description of thermal driver patch. >>>> - Added brcm,max-crit-temp DT parameter. >>>> >>>> Changes from v2: >>>> - All stingray TMON DT nodes are combine together into single. >>>> Temperature registers are combined into one mem resource. >>>> brcm,tmon-mask parameter has available TMONs mask value. >>>> - All available TMONs are initialized together in single >>>> instance of driver probe call. >>>> >>>> Changes from v1: >>>> - Fixed auto build sparce warning. >>>> >>>> Pramod Kumar (3): >>>> dt-bindings: thermal: Add binding document for SR thermal >>>> thermal: broadcom: Add Stingray thermal driver >>>> arm64: dts: stingray: Add Stingray Thermal DT support. >>>> >>>> .../bindings/thermal/brcm,sr-thermal.txt | 105 ++++++++++++++++++ >>>> .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 89 +++++++++++++++ >>>> drivers/thermal/Kconfig | 3 +- >>>> drivers/thermal/broadcom/Kconfig | 9 ++ >>>> drivers/thermal/broadcom/Makefile | 1 + >>>> drivers/thermal/broadcom/sr-thermal.c | 122 +++++++++++++++++++++ >>>> 6 files changed, 328 insertions(+), 1 deletion(-) >>>> create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt >>>> create mode 100644 drivers/thermal/broadcom/sr-thermal.c >>>> -- Florian