Re: [PATCH V2 1/2] dt-bindings: nvmem: add Broadcom's NVRAM

[Srinivas Kandagatla <srinivas.kandagatla@linaro.org>]

On 05/03/2021 18:32, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> Broadcom's NVRAM structure contains device data and can be accessed
> using I/O mapping.
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---


Applied both patches!


thanks
-srini

> V2: Use Broadcom's NVRAM specific binding. Generic "nvmem-iomap" binding
>      didn't make much sense. Thanks Srinivas!
> ---
>   .../devicetree/bindings/nvmem/brcm,nvram.yaml | 34 +++++++++++++++++++
>   1 file changed, 34 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
> 
> diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
> new file mode 100644
> index 000000000000..58ff6b0bdb1a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
> @@ -0,0 +1,34 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/nvmem/brcm,nvram.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom's NVRAM
> +
> +description: |
> +  Broadcom's NVRAM is a structure containing device specific environment
> +  variables. It is used for storing device configuration, booting parameters
> +  and calibration data.
> +
> +  NVRAM can be accessed on Broadcom BCM47xx MIPS and Northstar ARM Cortex-A9
> +  devices usiong I/O mapped memory.
> +
> +maintainers:
> +  - Rafał Miłecki <rafal@milecki.pl>
> +
> +allOf:
> +  - $ref: "nvmem.yaml#"
> +
> +properties:
> +  compatible:
> +    const: brcm,nvram
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    nvram@1eff0000 {
> +            compatible = "brcm,nvram";
> +            reg = <0x1eff0000 0x10000>;
> +    };
>