Re: [PATCH v2 2/3] iio: light: ROHM BH1745 colour sensor

[Ivan Orlov <ivan.orlov0322@gmail.com>]

On 6/3/24 17:21, Mudit Sharma wrote:
> Add support for BH1745, which is an I2C colour sensor with red, green,
> blue and clear channels. It has a programmable active low interrupt pin.
> Interrupt occurs when the signal from the selected interrupt source
> channel crosses set interrupt threshold high or low level.
> 
> This driver includes device attributes to configure the following:
> - Interrupt pin latch: The interrupt pin can be configured to
>    be latched (until interrupt register (0x60) is read or initialized)
>    or update after each measurement.
> - Interrupt source: The colour channel that will cause the interrupt
>    when channel will cross the set threshold high or low level.
> 
> This driver also includes device attributes to present valid
> configuration options/values for:
> - Integration time
> - Interrupt colour source
> - Hardware gain
> 
> Signed-off-by: Mudit Sharma <muditsharma.info@gmail.com>
> ---

LGTM,

Reviewed-by: Ivan Orlov <ivan.orlov0322@gmail.com>

-- 
Kind regards,
Ivan Orlov