* [PATCH 2/2] ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
@ 2022-05-03 9:41 Fabien Dessenne
2022-05-03 13:49 ` Alexandre TORGUE
0 siblings, 1 reply; 2+ messages in thread
From: Fabien Dessenne @ 2022-05-03 9:41 UTC (permalink / raw)
To: Rob Herring, Maxime Coquelin, Alexandre Torgue, devicetree,
linux-stm32, linux-arm-kernel, linux-kernel
Cc: Fabien Dessenne
The PA13 user button is connected to the PA13 pin of the stm32mp135f-dk
board. It requires an internal pull-up configuration.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
---
arch/arm/boot/dts/stm32mp135f-dk.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index 65acee0f68b7..09d6226d598f 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "stm32mp135.dtsi"
#include "stm32mp13xf.dtsi"
@@ -25,6 +26,16 @@ memory@c0000000 {
reg = <0xc0000000 0x20000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ user-pa13 {
+ label = "User-PA13";
+ linux,code = <BTN_1>;
+ gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 2/2] ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
2022-05-03 9:41 [PATCH 2/2] ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk Fabien Dessenne
@ 2022-05-03 13:49 ` Alexandre TORGUE
0 siblings, 0 replies; 2+ messages in thread
From: Alexandre TORGUE @ 2022-05-03 13:49 UTC (permalink / raw)
To: Fabien Dessenne, Rob Herring, Maxime Coquelin, devicetree,
linux-stm32, linux-arm-kernel, linux-kernel
On 5/3/22 11:41, Fabien Dessenne wrote:
> The PA13 user button is connected to the PA13 pin of the stm32mp135f-dk
> board. It requires an internal pull-up configuration.
>
> Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
> ---
> arch/arm/boot/dts/stm32mp135f-dk.dts | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
> index 65acee0f68b7..09d6226d598f 100644
> --- a/arch/arm/boot/dts/stm32mp135f-dk.dts
> +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
> @@ -7,6 +7,7 @@
> /dts-v1/;
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> #include <dt-bindings/leds/common.h>
> #include "stm32mp135.dtsi"
> #include "stm32mp13xf.dtsi"
> @@ -25,6 +26,16 @@ memory@c0000000 {
> reg = <0xc0000000 0x20000000>;
> };
>
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + user-pa13 {
> + label = "User-PA13";
> + linux,code = <BTN_1>;
> + gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
>
Applied on stm32-next.
Thanks.
Alex
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-05-03 13:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-05-03 9:41 [PATCH 2/2] ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk Fabien Dessenne
2022-05-03 13:49 ` Alexandre TORGUE
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).