Re: [PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI

[Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]

Hi,

On 30-08-18 21:01, Corentin Labbe wrote:
> Hello
> 
> This patchset add support for allwinner R40 AHCI controller.
> 
> The whole patchset is tested on sun8i-r40-bananapi-m2-ultra and
> on sun7i-a20-cubieboard2 which doesnt have any of the ressources added
> by this serie, so no regression should come with it.
> 
> The last patch(ata: ahci_sunxi: remove PHY code) should not be merged,
> but will be resent for inclustion when all patchs will have hit linus
> tree.

Thank you for your work on this, the entire series looks good to me:

Reviewed-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Note I've one remark for the final do-not-merge patch I will reply
to that patch separately.

Regards,

Hans



> 
> Changes since v3:
> - Moved PHY code to a new sun4i-a10-phy-sata driver
> - Removed reset code since ahci_platform support now reset controller.
> 
> Changes since V2
> - Moved all ressources management to ahci_platform
> 
> Corentin Labbe (13):
>    dt-bindings: ata: ahci-platform: fix indentation of target-supply
>    ata: ahci_platform: add support for AHCI controller regulator
>    dt-bindings: ata: ahci-platform: document ahci-supply
>    phy: Add sun4i-a10-phy-sata driver
>    dt-bindings: phy: document sun4i-a10-sata-phy
>    dt-bindings: ata: update ahci_sunxi bindings
>    ata: ahci_sunxi: Bypass PHY init when using the new binding
>    ata: ahci_sunxi: add support for r40
>    ARM: dts: sun8i: r40: add sata node
>    ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI
>    ARM: dts: sun7i: a20: add sata-port/sata-phy nodes
>    ARM: dts: sun4i: a10: add sata-port/sata-phy nodes
>    ata: ahci_sunxi: remove PHY code
> 
>   .../devicetree/bindings/ata/ahci-platform.txt      |  11 +-
>   .../devicetree/bindings/phy/sun4i-sata-phy.txt     |  20 ++
>   arch/arm/boot/dts/sun4i-a10.dtsi                   |  13 ++
>   arch/arm/boot/dts/sun7i-a20.dtsi                   |  13 ++
>   arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts  |  21 +++
>   arch/arm/boot/dts/sun8i-r40.dtsi                   |  23 +++
>   drivers/ata/ahci.h                                 |   1 +
>   drivers/ata/ahci_sunxi.c                           |  87 +--------
>   drivers/ata/libahci_platform.c                     |  26 ++-
>   drivers/phy/allwinner/Kconfig                      |   7 +
>   drivers/phy/allwinner/Makefile                     |   1 +
>   drivers/phy/allwinner/phy-sun4i-sata.c             | 208 +++++++++++++++++++++
>   12 files changed, 343 insertions(+), 88 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/phy/sun4i-sata-phy.txt
>   create mode 100644 drivers/phy/allwinner/phy-sun4i-sata.c
>