devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Anand Moon <linux.amoon@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
	Russell King <linux@armlinux.org.uk>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org
Subject: Re: [PATCHv1 0/6] Amlogic Soc - Add missing ethernet mdio compatible string
Date: Thu, 25 Mar 2021 14:19:23 +0100	[thread overview]
Message-ID: <4ce8997b-9f20-2c77-2d75-93e038eec6d8@gmail.com> (raw)
In-Reply-To: <20210325124225.2760-1-linux.amoon@gmail.com>

On 25.03.2021 13:42, Anand Moon wrote:
> On most of the Amlogic SoC I observed that Ethernet would not get
> initialize when try to deploy the mainline kernel, earlier I tried to
> fix this issue with by setting ethernet reset but it did not resolve
> the issue see below.
> 	resets = <&reset RESET_ETHERNET>;
> 	reset-names = "stmmaceth";
> 
> After checking what was the missing with Rockchip SoC dts
> I tried to add this missing compatible string and then it
> started to working on my setup.
> 
> Also I tried to fix the device tree binding to validate the changes.
> 
> Tested this on my Odroid-N2 and Odroid-C2 (64 bit) setup.
> I do not have ready Odroid C1 (32 bit) setup so please somebody test.
> 

When working on the Odroid-C2 I did not have such a problem.
And if you look at of_mdiobus_child_is_phy() and
of_mdiobus_register_phy() you'll see that your change shouldn't be
needed.

Could you please elaborate on:
- What is the exact problem you're facing? Best add a dmesg log.
- Which kernel version are you using?


> Best Regards
> -Anand
> 
> Anand Moon (6):
>   dt-bindings: net: ethernet-phy: Fix the parsing of ethernet-phy
>     compatible string
>   arm: dts: meson: Add missing ethernet phy mdio compatible string
>   arm64: dts: meson-gxbb: Add missing ethernet phy mimo compatible
>     string
>   arm64: dts: meson-gxl: Add missing ethernet phy mdio compatible string
>   arm64: dts: meson-g12: Add missing ethernet phy mdio compatible string
>   arm64: dts: meson-glx: Fix the ethernet phy mdio compatible string
> 
>  Documentation/devicetree/bindings/net/ethernet-phy.yaml | 6 +++---
>  arch/arm/boot/dts/meson8b-ec100.dts                     | 1 +
>  arch/arm/boot/dts/meson8b-mxq.dts                       | 1 +
>  arch/arm/boot/dts/meson8b-odroidc1.dts                  | 1 +
>  arch/arm/boot/dts/meson8m2-mxiii-plus.dts               | 1 +
>  arch/arm64/boot/dts/amlogic/meson-axg-s400.dts          | 1 +
>  arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts      | 1 +
>  arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi   | 3 ++-
>  arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi        | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi  | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts      | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts    | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts  | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts     | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts         | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi    | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi       | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts    | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi              | 2 +-
>  arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts   | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts     | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts          | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts      | 1 +
>  arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts      | 1 +
>  arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi      | 1 +
>  arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi       | 1 +
>  26 files changed, 29 insertions(+), 5 deletions(-)
> 


  parent reply	other threads:[~2021-03-25 13:20 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-25 12:42 [PATCHv1 0/6] Amlogic Soc - Add missing ethernet mdio compatible string Anand Moon
2021-03-25 12:42 ` [PATCHv1 1/6] dt-bindings: net: ethernet-phy: Fix the parsing of ethernet-phy " Anand Moon
2021-03-25 12:57   ` Andrew Lunn
2021-03-25 13:33     ` Anand Moon
2021-03-25 13:42       ` Heiner Kallweit
2021-03-25 16:56   ` Rob Herring
2021-03-25 17:37     ` Anand Moon
2021-03-25 12:42 ` [PATCHv1 2/6] arm: dts: meson: Add missing ethernet phy mdio " Anand Moon
2021-03-25 12:59   ` Andrew Lunn
2021-03-25 12:42 ` [PATCHv1 3/6] arm64: dts: meson-gxbb: Add missing ethernet phy mimo " Anand Moon
2021-03-25 12:42 ` [PATCHv1 4/6] arm64: dts: meson-gxl: Add missing ethernet phy mdio " Anand Moon
2021-03-25 12:42 ` [PATCHv1 5/6] arm64: dts: meson-g12: " Anand Moon
2021-03-25 12:42 ` [PATCHv1 6/6] arm64: dts: meson-glx: Fix the " Anand Moon
2021-03-25 13:02 ` [PATCHv1 0/6] Amlogic Soc - Add missing ethernet " Andrew Lunn
2021-03-25 13:19 ` Heiner Kallweit [this message]
2021-03-25 15:40   ` Anand Moon
2021-03-25 15:55     ` Heiner Kallweit
  -- strict thread matches above, loose matches on Subject: below --
2021-03-25 12:38 Anand Moon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4ce8997b-9f20-2c77-2d75-93e038eec6d8@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=kuba@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux.amoon@gmail.com \
    --cc=linux@armlinux.org.uk \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=narmstrong@baylibre.com \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).