From: Robin Murphy <robin.murphy@arm.com>
To: heiko@sntech.de
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org
Subject: [PATCH] arm64: dts: rockchip: Update nanopi4 phy reset properties
Date: Mon, 7 Oct 2019 12:33:26 +0100 [thread overview]
Message-ID: <4d16c24ae3651a2119cf5bb1213f46a9fce4b39a.1570444773.git.robin.murphy@arm.com> (raw)
Use the now-preferred generic phy reset properties instead of the
dwmac-specific ones.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index dd16c80d923e..170f7ed6d773 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -152,9 +152,6 @@
phy-handle = <&rtl8211e>;
phy-mode = "rgmii";
phy-supply = <&vcc3v3_s3>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 30000>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
tx_delay = <0x28>;
rx_delay = <0x11>;
status = "okay";
@@ -168,6 +165,9 @@
reg = <1>;
interrupt-parent = <&gpio3>;
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
};
};
};
--
2.21.0.dirty
next reply other threads:[~2019-10-07 11:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-07 11:33 Robin Murphy [this message]
[not found] ` <4d16c24ae3651a2119cf5bb1213f46a9fce4b39a.1570444773.git.robin.murphy-5wv7dgnIgG8@public.gmane.org>
2019-10-10 21:29 ` [PATCH] arm64: dts: rockchip: Update nanopi4 phy reset properties Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4d16c24ae3651a2119cf5bb1213f46a9fce4b39a.1570444773.git.robin.murphy@arm.com \
--to=robin.murphy@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).