Re: [PATCH v2 3/3] dt-bindings: arm: atmel: add binding for SAM9X60 shutdown controller

[<Nicolas.Ferre@microchip.com>]

On 21/02/2019 at 14:45, Claudiu Beznea - M18063 wrote:
> From: Claudiu Beznea <claudiu.beznea@microchip.com>
> 
> Add documentation for SAM9X60 shutdown controller.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

Thanks Claudiu. Regards,
   Nicolas

> ---
>   Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index 14f319f694b7..50f282ccbcb7 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -83,7 +83,7 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
>   1) shdwc node
>   
>   required properties:
> -- compatible: should be "atmel,sama5d2-shdwc".
> +- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
>   - reg: should contain registers location and length
>   - clocks: phandle to input clock.
>   - #address-cells: should be one. The cell is the wake-up input index.
> @@ -95,6 +95,9 @@ optional properties:
>     microseconds. It's usually a board-related property.
>   - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
>   
> +optional microchip,sam9x60-shdwc properties:
> +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
> +
>   The node contains child nodes for each wake-up input that the platform uses.
>   
>   2) input nodes
> 


-- 
Nicolas Ferre