Re: [PATCH V2 8/8] arm64: dts: qcom: sm4450: add camera, display and gpu clock controller

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 16.04.2024 8:20 PM, Ajit Pandey wrote:
> Add device node for camera, display and graphics clock controller on
> Qualcomm SM4450 platform.
> 
> Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sm4450.dtsi | 35 ++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> index 603c962661cc..c78b793f5d6a 100644
> --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> @@ -364,6 +364,41 @@ gcc: clock-controller@100000 {
>  				 <0>;
>  		};
>  
> +		camcc: clock-controller@ade0000 {
> +			compatible = "qcom,sm4450-camcc";
> +			reg = <0x0 0xade0000 0x0 0x20000>;

Please keep the non-zero address part padded to 8 hex digits

> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
> +				 <&gcc GCC_CAMERA_AHB_CLK>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +		};
> +
> +		dispcc: clock-controller@af00000 {
> +			compatible = "qcom,sm4450-dispcc";
> +			reg = <0 0x0af00000 0 0x20000>;

You used 0x0 above and 0 here.. Consistency is key! :P

Konrad