Re: [PATCH 4/5] drivers: mmc: sdhci: Add option to configure sdhci timeout

[Adrian Hunter <adrian.hunter@intel.com>]

On 19/12/22 16:24, Piyush Malgujar wrote:
> From: Jayanthi Annadurai <jannadurai@marvell.com>
> 
> Add config option to choose the sdhci timeout in seconds.

This approach is not ok, but why is the change wanted?

> 
> Signed-off-by: Jayanthi Annadurai <jannadurai@marvell.com>
> Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
> ---
>  drivers/mmc/host/Kconfig | 8 ++++++++
>  drivers/mmc/host/sdhci.c | 3 ++-
>  2 files changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index b5b2ae0bb4625bdb9d17acdbb1887c9caa3a1f32..ab48f2bc4cff73d1aad8d7da542d761cf0346d9f 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -1132,3 +1132,11 @@ config MMC_LITEX
>  	  module will be called litex_mmc.
>  
>  	  If unsure, say N.
> +
> +config MMC_SDHCI_TIMEOUT
> +	int
> +	default 1 if MMC_SDHCI_CADENCE
> +	default 10
> +	depends on MMC_SDHCI
> +	help
> +	  Default timeout value for command and data.
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index f3af1bd0f7b955272fbd8b034ecb591860b89aed..e9bc24258746834ec9c8f13fe24456587a2b758d 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1707,7 +1707,8 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
>  	else if (!cmd->data && cmd->busy_timeout > 9000)
>  		timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
>  	else
> -		timeout += 10 * HZ;
> +		timeout += CONFIG_MMC_SDHCI_TIMEOUT * HZ;
> +
>  	sdhci_mod_timer(host, cmd->mrq, timeout);
>  
>  	if (host->use_external_dma)